Japan boosts wood pellet imports in March
Japan's wood pellet imports in March rose from a year earlier, with Indonesian supplies hitting a record high of almost 60,000t.
Japan imported 531,500t of wood pallets in March, up by 47pc from a year earlier, according to preliminary data released by the country's finance ministry on 26 April. This was also higher by 9pc from February.
Imports from Indonesia jumped to 59,353t in March, more than a fivefold increase from 10,796t a year earlier. This significantly exceeded the previous record high of 35,516t in January. But Vietnam remained Japan's top supplier at 247,054t, up by 63pc on the year.
Japan received 102,478t of wood pellets from the US in March, withno cargoes delivered in March 2023.Imports from Malaysia also almost tripled to 22,261t from the previous year's 7,591t.
Higher March imports sent Japan's total imports in the April 2023-March 2024 fiscal year to around 6.1mn t, up by 29pc from a year earlier.
PKS imports
But Japan cut imports of palm kernel shell (PKS) in March, down by 30pc from a year earlier. Imports from Indonesia fell by 23pc to 184,384t, while Malaysian supplies declined by 51pc to 40,462t.
The start-up of a new biomass-fired power plant in March helped increase Japan's total imports. Japanese renewable power developer Renova in March started commercial operations at its 75MW Ishinomaki Hibarino biomass-fired power plant in northeast Japan's Miyagi prefecture, which burns an undisclosed volume of wood pellets and PKS.
But domestic utility Jera's 1,070MW Taketoyo No 5 coal and biomass co-fired power unit in Aichi prefecture has been off line since a fire in January. Fellow utility Tokyo Gas' 51.5MW Fushiki Manyofuto biomass-fired plant in Toyama prefecture also continued to face technical issues after a 7.6 magnitude earthquake hit the Hokuriku area in January.
Related news posts
India’s NTPC tests 20pc torrefied biomass co-firing
India’s NTPC tests 20pc torrefied biomass co-firing
Singapore, 13 May (Argus) — India's state-owned generator NTPC has demonstrated 20pc torrefied biomass-coal co-firing at a 110MW unit at its Tanda power plant in the northern state of Uttar Pradesh. The test was part of NTPC's efforts to expand biomass co-firing across its coal-fired fleet as it aims to lower emissions. Each percentage point of biomass co-firing has the potential to reduce carbon emissions by approximately the same percentage, while also helping in mitigating air pollution caused by direct burning of agricultural waste in farmlands, NTPC said. The generator currently conducts 7-10pc non-torrefied biomass co-firing at NTPC's Dadri power plant, near Delhi. Torrefied biomass was found suitable for higher co-firing percentages without significant system modifications, NTPC said. The torrefied biomass was produced by heating biomass in the absence of oxygen to exhibit characteristics akin to high-quality coal. The gross calorific value and cost of torrefied biomass pellets were currently equivalent to imported coal, it added. Costs could be reduced with the maturity of technology and market in the long run, NTPC said. India's push to cut coal reliance NTPC's efforts are part of India's broader goal of cutting emissions as the country aims to trim reliance on coal in the coming years and attain net zero by 2070. Delhi had initially asked Indian utilities to adopt co-firing of at least 5pc biomass pellets by October 2022. But only a fraction of utilities followed the directives, which eventually prompted the federal power ministry to review the biomass co-firing policy. The ministry amended the policy in June last year and delayed the start date of co-firing, asking all coal-based thermal power plants with bowl mills to use a minimum 5pc blend of biomass pellets made primarily from agricultural residue, with effect from the start of India's 2024-25 fiscal year on 1 April. The threshold would increase to 7pc from the start of 2025-26, the ministry said. Plants with ball and race mills should co-fire the same percentages of torrefied biomass pellets made from agricultural residue during the same time frame, it said. India has surplus biomass supplies of about 230mn t/yr, largely from agricultural residue, the power ministry previously said. NTPC tenders NTPC has awarded biomass supply contracts totalling about 5.2mn t for 20 power plants operated by NTPC, and a joint venture plant. Out of which, it has so far co-fired 316,657t of biomass pellets at 13 NTPC power plants and at the joint venture plant. The generator is setting up biomass pellet plants at various locations to ensure a steady supply of pellets for co-firing. It has set up a 22 t/d non torrefied pellet plant at Lehra Mohabbat, Bhatinda in Punjab state. It is building a 100 t/d torrefied and 100 t/d non-torrefied pellet plant at joint ventureAravali Power's Jhajjar plant. It is also building a 50 t/d non-torrefied pellet plant at the Dadri plant. By Saurabh Chaturvedi Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan adds biomass power capacity in Oct-Dec 2023
Japan adds biomass power capacity in Oct-Dec 2023
Tokyo, 7 May (Argus) — Japan's biomass power capacity under the feed-in-tariff (FiT) and feed-in-premium (FiP) schemes rose over October-December last year. Japan added 60MW of biomass power capacity during the quarter, lifting total commercial capacity under the FiT and FiP schemes to 6,364MW as of the end of December 2023, according to trade and industry ministry data. The capacity addition during October-December 2023 was lower than the 230MW increase during the year-earlier period, and also below a 152MW increase during July-September 2023. Installed capacity fed by general wood biomass and crop residue totalled 3,721MW at the end of December 2023, up by 24pc from the end of December 2022. Capacity firing with unused woody biomass rose by 11pc over the year to 541MW. Methane gas fermentation climbed by 13pc to 99MW, and capacity fed by general waste increased by 20pc to 554MW. Capacity using construction waste also rose by 11pc to 135MW. Japan's operational biomass power capacity totalled 7,238MW as of the end of the December, including 874MW that was installed before the FiT was introduced in July 2012 but not transferred to receive support from the scheme. This capacity accounts for 90pc of Japan's new biomass power target of 8,000MW by April 2030-March 2031 fiscal year. Total purchase costs for biomass power supplies under the FiT scheme reached ¥3.72 trillion ($24.1bn) for 143.2TMW from July 2012 to December 2023. Japan aims to generate 36-38pc of the country's power output from renewable energy sources during April 2030-March 2031, which is double the target of 18pc for 2019-20. Biomass is forecast to account for 5pc of total output in 2030-31. By Takeshi Maeda Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Steelmakers define biochar specifications
Steelmakers define biochar specifications
London, 3 May (Argus) — Woody biomass — particularly wood chips — would be an ideal feedstock for producing carbonised biomass (biochar) with at least 65pc carbon content that could be used as a reductant in steelmaking to replace fossil fuels, delegates heard at the Argus Biomass conference in London last week. "The main driver for us is to use [biochar] as a reductant, not for [process heat generation], so the driver is the carbon" content when defining the specifications of the biomass we can use, steelmaker ArcelorMittal's European buyer of biomass and alternative reductants,Steve Sirdey, said. Particle size distribution of biochar is another key specification, he said. Biochar used in a blast furnace needs to have at least 65pc carbon content, with a minimum particle size distribution of 6mm corresponding to the correct size to fit existing grinding equipment. Steelmaking in an electric arc furnace requires at least 80pc carbon-intensive biochar, with a particle size at least 10mm for top charge and 3-5mm for injection, Sirdey said. ArcelorMittal aims to replace up to 20pc of its fossil fuels injected today — pulverised coal injection in the blast furnace and anthracite in the electric arc furnace — without changing existing production processes, Sirdey said. "We can reach up to 2.8mn t/yr of [biochar consumption] with at least 65pc carbon content… If everything works well, ArcelorMittal is able to commit on long-term offtake contracts after all the… laboratory and other testing," he added. As we are replacing coal, price will be another main criteria in deciding on how much fossil fuel to replace with biochar, Sirdey said. "With the existing technology and the information we have, we think wood chips are the best feedstock at the moment in terms of chemical composition," Tata Steel's biomass and coal procurement manager, Frank van der Zon, said. Tata Steel would need to consume around 250,000 t/yr of biochar for its steelmaking unit in the Netherlands, which would require around 1.2mn-1.5mn t/yr of wood chip feedstock. Steelmakers also have to consider whether to buy biochar or build on-site biochar production capacity. "Our goal is to be offtakers and commit to volumes. To meet decarbonisation targets, we believe that the biochar plant needs to be close to the feedstock," Sirdey said. ArcelorMittal commissioned the first of two 37,500 t/yr biochar producing units at its Torero plant in Ghent, Belgium, in December. The unit will use around 90,000 t/yr of waste wood as feedstock. Unlike for power generation, the EU has not regulated the use of biomass by steelmakers or other hard-to-abate sectors, with companies following local regulations in the areas that they operate. But steelmakers are setting up a voluntary standard for the biomass to be certified for sustainability, with Tata Steel and ArcelorMittal aiming to consume only biomass that complies with EU renewable energy directive standards. "We need to prove that biomass is the right feedstock… and have the responsibility to make sure that the feedstock is sustainably sourced," van der Zon said. The majority of the steel industry's decarbonisation will be through technology change — switching to electrification with the electric arc furnace, which will reduce emissions by 70-80pc, van der Zon said. The remaining emissions are the hard-to-abate part, where using biomass to replace fossil fuels would help the sector to "become completely carbon neutral", he said. By Erisa Senerdem Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Beccs revenues 'dependent on sustainability'
Beccs revenues 'dependent on sustainability'
London, 3 May (Argus) — Danish state-controlled utility Orsted and UK utility Drax are increasingly dependent on sustainability criteria for their revenue streams from carbon removal (CDR) credit sales from bioenergy with carbon capture and storage (Beccs) projects, delegates heard at the Argus Biomass conference in London last week. "The key to be able to create such a project is to secure finance, which actually comes from the sale of carbon removal certificates," Orsted senior lead business developer for CCS David Fich said. Adding that the ability of companies to prove the sustainability of the biomass they source was now key to securing financing — including from CDR — for Beccs, and not only a matter of communicating that bioenergy and Beccs were environmentally friendly and carbon neutral businesses. Drax commercial director Angela Hepworth agreed: "Sustainability here is not a nice-to-have, this is the very foundation of our licence to upgrade and our ability to sell the credits and enable us to progress in these projects." Aligned standards within the industry and stronger incentives would encourage corporates to buy carbon credits against reputation backlashes, Hepworth added. Drax and Swedish utility Stockholm Exergi commissioned a methodology for measuring the net CO2 removal through Beccs published in October 2023, which was overall well-received by market participants. The utilities also presented it to the European Commission in the same month. A standardised approach to Beccs would encourage smaller buyers, which rely on certifications to identify the sustainable criteria of the carbon removal value chain when purchasing CDR credits, Fich said. While most larger corporates were doing their own due diligence. "The smaller buyers are those that are able to pay more," Fich said, adding that these companies were necessary to improve the liquidity of the market. Orsted signed a contract with Microsoft in May 2023 for the purchase of 2.76mn t of carbon removals over the next 10 years. Drax is also selling CDR certificates in the voluntary carbon market](https://direct.argusmedia.com/newsandanalysis/article/2441200) and is hoping to get the credits into the UK's trading scheme. Such deals "will help to make Beccs credits be seen in the more mainstream markets," Hepworth said. By Marta Imarisio Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more