Generic Hero BannerGeneric Hero Banner
Latest Market News

Turkish met coke imports drop after 2017 surge

  • Spanish Market: Coking coal, Metals
  • 18/02/19

Turkey's imports of metallurgical coke fell in 2018, following 2017's sharp rise when the country hiked imports to offset lower domestic output during coke battery upgrades (see chart).

Turkey imported 811,005t of met coke in 2018, down from 2.1mn t in 2017, but up from 590,529t in 2016, according to trade data.

Colombian deliveries to Turkish mills fell to 135,613t from 371,630t in 2017. That said, last year's deliveries were only slightly down from 2016's 159,527t, suggesting a return to more normal levels after 2017's surge.

The US was one of the largest suppliers of met coke in 2017, shipping 357,537t. But volumes sank to just 2t last year and US producers are now focused on meeting domestic requirements in light of the country's tight demand-supply balance as steel production pushes higher. Similarly, Australia shipped 399,690t to Turkey in 2017, but none last year, according to trade data.

But despite the overall drop in volumes, there were some notable growth areas such as Russia which delivered 247,134t of met coke to Turkey last year - up from 185,645t in 2017 and just 26,814t in 2016.

Imports from China edged up last year — to 338,413t from 324,540t — despite regional concern about high prices. Market participants note that Turkish mills often drive a hard bargain on raw material purchases and can be willing to buy off-spec/unbranded material, enabling them to limit exposure to particularly high price levels.

The Argus daily fob north China assessment for 62 CSR met coke is at $332.50/t today, down from a 2018 peak of $390.85/t fob in early-November. The 65 CSR met coke index is at $342/t fob north China, down from a 2018 high of $400.50/t in November.

Turkish imports of Polish met coke hit 31,831t last year, up from zero in 2017, but down from 82,808t in 2016.

Turkey did not import any met coke from Ukraine last year, as Ukrainian mills prioritised their own requirements. Turkey received 50,646t from Ukraine in 2017.

Coking coal imports jump

As met coke imports fell, Turkey's coking coal imports rose significantly, to 5.8mn t in 2018 from 4.28mn t in 2017 (see chart).

US cargoes accounted for the largest share, with volumes rising by 30.1pc to 2.39mn t. Imports of Australian coking coal also rose sharply, by 80.1pc to 1.96mn t.

And imports of Colombian coking coal almost doubled year on year to 770,466t.

Imports of Canadian coking coal dropped by 8.3pc to 445,225t, while imports of Russian coking coal fell by 29pc to 155,858t.

Mozambican coking coal remains in the frame, imports of which hit 77,006t last year, down from 96,415t in 2017.

BOF-based steel output faring better than EAF

Turkish steelmakers have suffered a bruising 12 months, with challenging economic conditions weighing on domestic consumption and trade defence measures forcing steel exporters to find new markets. But despite this, crude steel production held steady, at 37.3mn t in 2018, down only slightly from 37.5mn t in 2017, according to producers' association TCUD. Output from electric arc furnaces (EAFs) and basic oxygen furnaces (BOF) was lower.

But January data released today by TCUD show a divergence between the two production methods. Total steel output fell by 19.5pc on the year to 2.57mn t in January. EAF-based production fell particularly sharply, by 26.5pc to 1.6mn t, while BOF-based production was down by just 4.7pc, at 966,000t.

This divergence reflects rebar production cuts at several Turkish EAF-based mills, most of which are believed to have taken place in January, with some mills previously saying they planned to cut output by up to 50-60pc in response to a weak market. In addition, higher scrap prices relative to iron ore in the past 4-5 months have squeezed EAF-based mill's margins. The Argus daily cfr Turkey assessment for HMS 1/2 80:20 grade scrap stood at $326/t on 16 February, up from a year-to-date low of $276.50/t cfr on 11 January.

The more diverse range of steel products made using the BOF route also gives those steelmakers more flexibility when rebar demand is weak. Recent months have seen flat steel producers maintain robust output by focusing on sales to Europe as the regional quota fills up.

Turkish met coke imports t

Turkish coking coal imports t

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

06/05/25

Trump unlikely to lift tariffs on Canada

Trump unlikely to lift tariffs on Canada

Washington, 6 May (Argus) — President Donald Trump suggested today he would not lift tariffs on imports from Canada and told Canadian prime minister Mark Carney that the US-Canada-Mexico (USMCA) free trade agreement needs to be renegotiated. Trump, who hosted Carney at the White House today, told reporters that there was nothing Canada's leader could tell him to change his mind on stiff tariffs he imposed on Canadian steel, aluminum, cars and auto parts. "It's just the way it is," Trump said. While Trump has altered his tariff levels repeatedly, his administration has imposed a 25pc tariff on Canada-sourced steel and aluminum, and a 25pc tariff on some cars and autoparts imported from Canada. Any product that qualifies for duty-free treatment under the USMCA is exempt from tariffs Trump imposed. The 10pc tariff Trump imposed on Canadian crude and other energy imports only lasted from 4-7 March, causing turmoil in North American energy markets. But even the remaining tariffs are a significant hindrance for the integrated North American auto industry, executives in Canada and the US have said. Trump today described the USMCA, which he negotiated during his first administration, as merely a "transitional deal" and suggested that it could be either terminated or renegotiated completely. The USMCA includes a provision calling for it to be reviewed by all three countries in 2026. The existing free trade agreement is "a basis for broader negotiations," Carney said, adding that "some things about it are going to have to change." Carney made his first trip to Washington just a week after winning the 28 April parliamentary election, following a campaign centered around his opposition to Trump's policies. Trump and Carney offered polite compliments to each other, but there was little visible chemistry between the two men. Trump doubled down on his suggestion that Canada could become the 51st US state, prompting Carney to tell him that "as you know from real estate, there are some places that are never for sale." "Having met with the owners of Canada over the course of the campaign in the last several months, it's not for sale," Carney said. "Never say never", Trump retorted. Trump also repeated his past claims that "we don't do much business with Canada. From our standpoint, they do a lot of business with us." "We are the largest client of the United States," said Carney. "We have a tremendous auto sector between the two of us." By Haik Gugarats Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

US vehicle sales slip in April from 4-year high


05/05/25
05/05/25

US vehicle sales slip in April from 4-year high

Houston, 5 May (Argus) — Domestic sales of light vehicles in April slipped from a four-year high the prior month but still reflected robust purchasing ahead of planned implementation of more US tariffs on the automotive industry. Sales of light vehicles — trucks and cars — dipped to a seasonally adjusted rate of 17.3mn units in April, down from 17.8mn in March, the Bureau of Economic Analysis reported today. Last month's total still was above April 2024's annualized rate of 16mn and was the second-highest monthly reading since April 2021. US consumers maintained steady purchasing last month in a rush to beat 25pc tariffs on imports of vehicle parts that were set to be implemented on 3 May. Those higher duties are expected to raise input costs for domestic automakers, and thus, prices for buyers. US president Donald Trump early last week signed an order that allows vehicle manufacturers to partially recoup tariff-related costs, helping to ease the burden. Still, Trump maintained his goal of forcing US automakers to become wholly reliant on auto parts made in the US. Trump already instituted 25pc tariffs on imports of foreign-made vehicles on 3 April. Tariff-related pressures have dented US consumer sentiment and weighed on domestic manufacturing activity, but certain pockets of the economy have shown resilience such as the services industry and employment. Truck sales last month fell by 1.9pc sequentially to 14.4mn unit rate, while car sales dropped by 8.8pc to a 2.9mn unit rate. Domestic vehicle production fell to a seasonally adjusted annual rate of 10.07mn from an upwardly revised 10.09mn in February, according to US Federal Reserve data. That compares with 11.08mn in March 2024. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Ford expects $1.5bn tariff hit in 2025


05/05/25
05/05/25

Ford expects $1.5bn tariff hit in 2025

Pittsburgh, 5 May (Argus) — Ford expects tariffs to cost the US automaker about $1.5bn in profit this year, causing the firm to withdraw its full-year financial guidance today. Tariffs and the uncertain rollout of potential changes to those tariff caused the Dearborn, Michigan-based company to suspend its 2025 guidance, which was initially projected at $7bn-8.5bn in earnings before interest and taxes. US president Donald Trump has place 25pc import taxes on vehicles, steel and aluminum, placing immense pressure on US automakers, many of whom have operations in Mexico and Canada. Ford is the third major US automaker to rescind its financial guidance in the past week following similar decisions by Stellantis and General Motors . By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexico's manufacturing contraction deepens in April


05/05/25
05/05/25

Mexico's manufacturing contraction deepens in April

Mexico City, 5 May (Argus) — Activity in Mexico's manufacturing sector shrank for a 13th straight month in April, with declines accelerating in production and new orders, according to a survey of purchasing managers. The manufacturing purchasing managers' index (PMI) fell to 45.5 in April from 46.9 in March, finance executives' association IMEF said, moving further below the 50-point threshold that separates growth from contraction. US tariffs imposed since March are adding pressure to Mexico's manufacturing sector, which makes up about a fifth of the national economy. The auto industry, responsible for roughly 18pc of manufacturing GDP, may be the hardest hit by the new measures, including a 25pc tariff on auto parts that took effect 3 May. Mexico remains the top exporter of vehicles to the US, supplying 23pc of all US auto imports in 2024. But IMEF said tariffs compound broader, mostly domestic headwinds, including reduced public spending and investor uncertainty stemming from sweeping legal and regulatory reforms. New investment has stalled since late 2024. The PMI index for new orders fell by 2.5 points to 41.8, the lowest since June 2020. Production dropped by 2.5 points to 43.6, while employment fell by 0.6 point to 46.4. New orders and production have now been in contraction for 14 straight months, and employment for 15. Inventories saw the steepest drop in April, falling 4 points to 46.3 — sliding from expansion to contraction — as manufacturers accelerated shipments after tariff implementation dates were confirmed. IMEF's non-manufacturing PMI — which covers services and commerce — remained in contraction for a fifth consecutive month but edged up by 0.5 points to 49.0 in April. Within that index, new orders rose by 0.6 points to 48.1, employment increased 1.3 points to 48.6 and production held steady at 47.5. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Australia's Labor win may aid low-carbon Fe, Al sectors


05/05/25
05/05/25

Australia's Labor win may aid low-carbon Fe, Al sectors

Sydney, 5 May (Argus) — The Australian Labor party's victory in the country's 3 May parliamentary election could support low-carbon iron and aluminium developers, providing policy clarity and public capital to the sectors. Labor's victory provides more certainty around Australia's A$14bn ($9.06bn) green hydrogen subsidy scheme, which will help steel producers transition towards hydrogen-powered steel furnaces. The opposition Coalition during the election pledged to scrap the programme, which will allow producers to claim A$2/t of green hydrogen produced from 2027. Australian steelmaker NeoSmelt and South Korean steelmaker Posco are developing electric iron smelters in Western Australia (WA) that produce hot-briquetted iron, which is used in the green steel process. Both projects will initially rely on natural gas but may transition to hydrogen-based processing as hydrogen production rises. Australia's hydrogen tax credits may prove crucial given ongoing hydrogen production challenges. South Australia's state government closed its Office of Hydrogen Power SA on 2 May, following a funding cut earlier this year. Labor can now also move forward with plans for A$2bn in low-emissions aluminium production credits, beginning in 2028-29. Smelters will be able to claim credits per tonne of low-carbon aluminium produced, based on their Scope 2 emission reductions. The party's proposal does not include any blanket credit for producers. Labor's aluminium production credits are aimed at supporting the Australian government's goal of doubling the country's share of renewable power from about 40pc to 82pc by 2030. Australian producers export about 1.5mn t/yr of aluminium, according to industry body Australian Aluminium Council, from four smelters located around the country. Green iron funding Labor's election win also secures its A$1bn lower-emission iron support pledge , first announced in late February. Half of the fund will go towards restarting and transitioning the 1.2mn t/yr Whyalla steelworks in South Australia into a green steel plant. The other half will support new and existing green iron and steel projects to overcome initial funding barriers. Labor has not allocated any funding through the programme yet. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more