Latest Market News

Iron ore price spike widens concentrate discounts

  • Spanish Market: Metals
  • 18/07/19

Floating discounts for iron ore concentrates have widened into China this month, including for higher-quality brands like 67-68pc Fe Minas Rio, as big moves in the underlying indexes and competition from domestic ores pressure discounts downward.

The average bid, offer and deal levels for iron ore concentrate maintained their premiums to the 65pc index through April, falling from an average premium of around $4.50/dry metric tonne (dmt) in January to below $1.25/dmt in April, Argus market data show. Only a few concentrate offers were flat to the index in May as trade slowed, while 62pc fines prices rose above the $100/dmt cfr Qingdao level.

Concentrate traded at an average discount of above $4/dmt in June and at a discount of $5/dmt in July to date to the 65pc index, Argus data show.

"The discount is deeper, but it does not mean the outright price is lower. Actually with the index surging substantially, the outright price is increasing very fast, despite the deeper discount," a Shandong-based steel mill official said.

The Argus ICX 62pc index has risen by 67pc to $120.55/dmt cfr Qingdao this year, but mills' narrow profit margins have limited gains for higher-grade ores to 50pc for the 65pc index, 47pc for lump and 16-18pc for Indian pellet into China.

The ceiling on pellet price gains and competition from lower-priced domestic concentrate supply have limited price rises for concentrate imports.

"I don't think there will be much improvement in imported concentrate demand soon," with domestic concentrate prices 70-140 yuan/wmt ($10-20/wmt) lower than imported concentrates, a Hebei-based steel mill official said. "Mills are happy to use low-alumina domestic concentrate for pelletising."

Iron ore price increases this year have made more domestic iron ore mines economical but the increase in supply has been modest, with regulations restricting large-scale expansion of iron ore mining.

Tangshan's restriction since 1 July has also dampened demand for imported concentrate as the stricter July restriction has reduced demand for iron ore. Mills will also be fully supplied with domestic concentrate, so there is not much room for more expensive imported concentrate. Imported concentrate in Tangshan is selling especially slow, market participants said.

Signs of demand

There have been signs of liquidity slightly rising at the port in recent days when the price of domestic concentrate increased too fast.

Ten August cargoes of Karara concentrate were sold through a tender early last week at a $5.50/dmt discount to August 65pc index, market participants said. A July tender last month for Karara concentrate also closed at $5.50/dmt below index, market participants said.

The August-delivery cargo of Minas Rio, the 67-68 Fe concentrate produced by Anglo Americans in Brazil, was offered at August P65 index minus $5/dmt last week. And there are traders who think the tradable price may be around the minus $6-7/dmt level.

A July-delivery Karara concentrate was offered at July P65 index minus $5/dmt and Citic concentrate offered at July P65 index minus $6.50/dmt.

The discount for imported concentrate started around early April this year when a cargo of May-delivery Ukraine concentrate was done at minus $1/dmt on 5 April. And the discount deepened when the index rose substantially in May and June. A July-delivery Ukraine concentrate was done at minus $5/dmt in mid-June.

Ukraine concentrate has been traded at the same or narrow price differential with PB fines since early July, despite the former having 64-65pc Fe content while the latter has around only 61.5pc Fe. Ukraine concentrate was done at Yn905/wmt at Caofeidian port, exactly the same price for PB fines at the same port on 5 July. It was done at Yn915/wmt at Shandong on 12 July, slightly higher than PB fines at Yn895/wmt at Shandong on the same day. It was done at Yn910/wmt at Lianyungang on 17 July, only Yn20/wmt lower than PB fines at the same port

An east China steel mill has sold a cargo of 66.49pc Brazilian concentrate at Yn895/wmt at Lianyungang port on 15 July. Iran pelletising concentrate sold at Yn910/wmt at Lanqiao port of Shandong on the same day, with the PB fines price at the Yn890-900/wmt level.

The future of the pelletising industry

Minas Rio concentrate is now mainly sold to China through long-term contracts, and the project has such contracts with five to six mills in total in China. Apart from this, not many cargoes are sold in the seaborne market — maybe just one cargo every two months, market participants said.

The discount for long-term contracts for Minas Rio concentrate in July is minus $7-8/dmt, while the discount for long-term contracts for Citic concentrate in July is minus $6.50-7/dmt, market participants said.

Minas Rio uses the rotary kiln electric furnace (RKEF) process or travelling grates rather than shaft furnaces for pelletising so that its concentrate can be sold to large or medium-sized steel mills, as the RKEF process and travelling grates are more popular with such mills and also more environmentally friendly.

Shaft furnaces, which creates more pollution, are used mostly in small steel mills for cheaper and quicker pelletising. But with environmental measures becoming stricter the RKEF process and travelling grates may be the future of the pelletising industry, as shaft furnaces face being phased out.

Average iron ore concentrate spot market floating prices $/dmt

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

21/11/24

US alleges Nippon dumped HRC at higher rates

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Recent deep-sea and short-sea cfr Turkey scrap deals


21/11/24
21/11/24

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output drops further in October


21/11/24
21/11/24

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ArcelorMittal could close two service centres in France


20/11/24
20/11/24

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Graphjet launches Malaysian biomass-to-graphite plant


20/11/24
20/11/24

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more