Generic Hero BannerGeneric Hero Banner
Latest Market News

Viewpoint: Taiwan scrap headwinds persist in 2020

  • Spanish Market: Metals
  • 06/01/20

The price outlook for 2020 in Asia's benchmark containerised ferrous scrap market Taiwan is notably less optimistic than in global bulk market leader Turkey, reflecting the extent to which Asian and Atlantic scrap trends are increasingly diverging.

The Argus containerised HMS 1/2 80:20 cfr Taiwan assessment averaged $256.22/t in 2019, down by 22.1pc from the 2018 average of $328.84/t. This assessment was changed to publish daily from weekly on 2 September 2019 because of increased trading activity in the market.

This rate of decrease in the Taiwan containerised scrap import price significantly exceeded the rate of decline in the global seaborne reference — the Turkish deep-sea import price. The Argus daily HMS 1/2 80:20 cfr Turkey assessment fell by 15.8pc on the year to average $286.10/t in 2019.

The spread between the two markets widened in the second half of 2019 as Taiwanese buyers accepted a far smaller price recovery in imported scrap compared with their Turkish counterparts. This is because Taiwanese mills faced stronger pressure from imported steel and a sharp fall in exported volumes.

Taiwan's imports of long steel products were down by 1.85pc on the year in January-October, which was below the 2.5pc fall in its crude steel production, suggesting a gain in market share by imported longs. This was further compounded by a sharp decline in Taiwanese long steel exports, by 19.5pc on the year to below 500,000t.

Domestic sales were in no better condition — Taiwanese mills throughout last year frequently complained about a lack of available storage space for finished steel and scrap as they struggled to sell.

A number of market participants suggested that the impending Taiwanese presidential election on 11 January stalled many infrastructure and construction projects. And many of them expect the market to improve after the election as Taiwan's GDP growth is forecast to exceed many of its neighbours in Asia.

Taiwan's directorate general of budget, accounting and statistics in November 2019 raised its forecast for the country's GDP growth for 2020 to 2.72pc from 2.58pc. Forecasts by external analysts such as Standard Chartered Bank were more cautious at 2.2pc, but even that still exceeds Taiwan's neighbours such as Singapore and Hong Kong, where forecasts are for a growth rate of 1.4pc and a contraction of 1.5pc, respectively.

But sectors expected to register strong growth are those that are less steel intensive, such as artificial intelligence, electronics and semi-conductors. Taiwan's steel and machinery industries are still expected to be under pressure from rising protectionism around the world and uncertainty surrounding the US-China trade war, despite a "first phase" trade agreement that is expected to be signed on 15 January.

Revenues from the basic metals, metal products and machine manufacturing industries fell by 5.5pc, 11.2pc and 14.2pc on the year in July-September 2019, Taiwan's department of statistics said.

There is also no guarantee that many large infrastructure projects will kick off immediately after the election as Taiwan's infrastructure system is well developed and the government's prior plans were for few large projects to commence in 2020, although the two leading presidential candidates, Tsai Ing-wen and Han Kuo-yu, both suggested that they will increase investment in infrastructure once elected. But the impact of any new investment is likely to be seen in the latter part of 2020 at the earliest.

Tsai promoted the Forward-looking Infrastructure Development Programme in 2017 and budgeted 222.9bn New Taiwan dollars ($7.42bn) for the second phase running from 2019 to 2020. The programme will provide funding for eight categories including railway projects, green energy infrastructure and digital infrastructure. While Tsai will aim to advance this programme if she is re-elected, Han listed six tasks in his infrastructure manifesto, which includes scrapping the Kaohsiung International Airport expansion project and relocating it elsewhere.

The return of businesses from China because of the US-China trade war may drive private construction up as it will require new offices and factories. But this increase in steel consumption is not sufficient to absorb the additional volumes available because of the lack of exports and increasingly competitive seaborne offers of finished and semi-finished steel products.

Against this backdrop, the Taiwanese steel market will be challenging this year, which will in turn put pressure on containerised ferrous scrap import prices.

By Chi Hin Ling


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

05/05/25

US vehicle sales slip in April from 4-year high

US vehicle sales slip in April from 4-year high

Houston, 5 May (Argus) — Domestic sales of light vehicles in April slipped from a four-year high the prior month but still reflected robust purchasing ahead of planned implementation of more US tariffs on the automotive industry. Sales of light vehicles — trucks and cars — dipped to a seasonally adjusted rate of 17.3mn units in April, down from 17.8mn in March, the Bureau of Economic Analysis reported today. Last month's total still was above April 2024's annualized rate of 16mn and was the second-highest monthly reading since April 2021. US consumers maintained steady purchasing last month in a rush to beat 25pc tariffs on imports of vehicle parts that were set to be implemented on 3 May. Those higher duties are expected to raise input costs for domestic automakers, and thus, prices for buyers. US president Donald Trump early last week signed an order that allows vehicle manufacturers to partially recoup tariff-related costs, helping to ease the burden. Still, Trump maintained his goal of forcing US automakers to become wholly reliant on auto parts made in the US. Trump already instituted 25pc tariffs on imports of foreign-made vehicles on 3 April. Tariff-related pressures have dented US consumer sentiment and weighed on domestic manufacturing activity, but certain pockets of the economy have shown resilience such as the services industry and employment. Truck sales last month fell by 1.9pc sequentially to 14.4mn unit rate, while car sales dropped by 8.8pc to a 2.9mn unit rate. Domestic vehicle production fell to a seasonally adjusted annual rate of 10.07mn from an upwardly revised 10.09mn in February, according to US Federal Reserve data. That compares with 11.08mn in March 2024. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Ford expects $1.5bn tariff hit in 2025


05/05/25
05/05/25

Ford expects $1.5bn tariff hit in 2025

Pittsburgh, 5 May (Argus) — Ford expects tariffs to cost the US automaker about $1.5bn in profit this year, causing the firm to withdraw its full-year financial guidance today. Tariffs and the uncertain rollout of potential changes to those tariff caused the Dearborn, Michigan-based company to suspend its 2025 guidance, which was initially projected at $7bn-8.5bn in earnings before interest and taxes. US president Donald Trump has place 25pc import taxes on vehicles, steel and aluminum, placing immense pressure on US automakers, many of whom have operations in Mexico and Canada. Ford is the third major US automaker to rescind its financial guidance in the past week following similar decisions by Stellantis and General Motors . By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexico's manufacturing contraction deepens in April


05/05/25
05/05/25

Mexico's manufacturing contraction deepens in April

Mexico City, 5 May (Argus) — Activity in Mexico's manufacturing sector shrank for a 13th straight month in April, with declines accelerating in production and new orders, according to a survey of purchasing managers. The manufacturing purchasing managers' index (PMI) fell to 45.5 in April from 46.9 in March, finance executives' association IMEF said, moving further below the 50-point threshold that separates growth from contraction. US tariffs imposed since March are adding pressure to Mexico's manufacturing sector, which makes up about a fifth of the national economy. The auto industry, responsible for roughly 18pc of manufacturing GDP, may be the hardest hit by the new measures, including a 25pc tariff on auto parts that took effect 3 May. Mexico remains the top exporter of vehicles to the US, supplying 23pc of all US auto imports in 2024. But IMEF said tariffs compound broader, mostly domestic headwinds, including reduced public spending and investor uncertainty stemming from sweeping legal and regulatory reforms. New investment has stalled since late 2024. The PMI index for new orders fell by 2.5 points to 41.8, the lowest since June 2020. Production dropped by 2.5 points to 43.6, while employment fell by 0.6 point to 46.4. New orders and production have now been in contraction for 14 straight months, and employment for 15. Inventories saw the steepest drop in April, falling 4 points to 46.3 — sliding from expansion to contraction — as manufacturers accelerated shipments after tariff implementation dates were confirmed. IMEF's non-manufacturing PMI — which covers services and commerce — remained in contraction for a fifth consecutive month but edged up by 0.5 points to 49.0 in April. Within that index, new orders rose by 0.6 points to 48.1, employment increased 1.3 points to 48.6 and production held steady at 47.5. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Australia's Labor win may aid low-carbon Fe, Al sectors


05/05/25
05/05/25

Australia's Labor win may aid low-carbon Fe, Al sectors

Sydney, 5 May (Argus) — The Australian Labor party's victory in the country's 3 May parliamentary election could support low-carbon iron and aluminium developers, providing policy clarity and public capital to the sectors. Labor's victory provides more certainty around Australia's A$14bn ($9.06bn) green hydrogen subsidy scheme, which will help steel producers transition towards hydrogen-powered steel furnaces. The opposition Coalition during the election pledged to scrap the programme, which will allow producers to claim A$2/t of green hydrogen produced from 2027. Australian steelmaker NeoSmelt and South Korean steelmaker Posco are developing electric iron smelters in Western Australia (WA) that produce hot-briquetted iron, which is used in the green steel process. Both projects will initially rely on natural gas but may transition to hydrogen-based processing as hydrogen production rises. Australia's hydrogen tax credits may prove crucial given ongoing hydrogen production challenges. South Australia's state government closed its Office of Hydrogen Power SA on 2 May, following a funding cut earlier this year. Labor can now also move forward with plans for A$2bn in low-emissions aluminium production credits, beginning in 2028-29. Smelters will be able to claim credits per tonne of low-carbon aluminium produced, based on their Scope 2 emission reductions. The party's proposal does not include any blanket credit for producers. Labor's aluminium production credits are aimed at supporting the Australian government's goal of doubling the country's share of renewable power from about 40pc to 82pc by 2030. Australian producers export about 1.5mn t/yr of aluminium, according to industry body Australian Aluminium Council, from four smelters located around the country. Green iron funding Labor's election win also secures its A$1bn lower-emission iron support pledge , first announced in late February. Half of the fund will go towards restarting and transitioning the 1.2mn t/yr Whyalla steelworks in South Australia into a green steel plant. The other half will support new and existing green iron and steel projects to overcome initial funding barriers. Labor has not allocated any funding through the programme yet. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Cliffs to idle 3 US steel mills this summer


02/05/25
02/05/25

Cliffs to idle 3 US steel mills this summer

Houston, 2 May (Argus) — Integrated steelmaker Cleveland-Cliffs will indefinitely idle its Conshohocken, Riverdale, and Steelton steel mills this summer in response to weak demand for the products produced at the mills. The idlings will impact about 950 workers spread across the 700,000 short ton (st)/yr Riverdale high-carbon coil mill in Illinois, the 500,000st/yr Conshohocken specialty plate mill in Pennsylvania and the 300,000st/yr Steelton, Pennsylvania railroad rail mill, a company spokesperson told Argus . Cliffs said the moves are temporary and will begin at the end of the required 60-day WARN notice periods in their respective states — on or about 30 June. By Marialuisa Rincon Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more