Generic Hero BannerGeneric Hero Banner
Latest Market News

China ferrous scrap usage surged in 2019

  • Spanish Market: Metals
  • 29/05/20

China's consumption of ferrous scrap grew by 15pc on the year in 2019 to 215.93mn t, according to statistics released today by the Bureau of International Recycling (BIR).

The 28.1mn t rise in Chinese ferrous scrap consumption outpaced an 8.3pc rise in the country's crude steel production to 996.3mn t.

The main driver for the increase was higher pollutant emission standards for the Chinese steel industry, which caused most of the country's basic oxygen furnace (BOF) mills to increase their scrap inputs, BIR said.

The current average steel scrap/crude steel ratio in Chinese BOF mills was estimated by BIR to be 20.2pc.

Higher BOF usage offset a slight fall in China's electric arc furnace (EAF) crude steel output in 2019. Chinese EAF production fell by 14.5pc to 103.2mn t after more than doubling from 54mn t to 120.7mn t between 2017 and 2019.

The EAF share of total Chinese crude steel production decreased to 10.4pc against 89.6pc for BOFs from 13pc against 87pc in 2018.

China's EAFs lost market share against BOF mills in 2019 as high scrap prices caused by tight availability meant EAF steelmakers' margins came under heavy pressure as domestic rebar prices weakened. This resulted in EAF utilisation rates falling throughout 2019.

The longer term rise in EAF production over the past five years, along with the increased scrap utilisation by BOF mills has driven Chinese ferrous scrap consumption up by 159pc, or 132.6mn t, since 2015. Chinese crude steel production only increased by 19.3pc over the same period.

China has become almost completely self-sufficient for sourcing ferrous scrap even as its demand has risen. Restrictions on imports of all scrap metal caused Chinese ferrous scrap imports to collapse in 2019, falling by 86.3pc to 184,000t from 1.34mn t in 2018.

The bulk of those imports were done in the first half of 2019, with even more stringent restrictions enforced from July causing monthly totals to drop below 5,000t throughout the second half.

China offsets fall in wider global scrap usage

The continuing surge in Chinese ferrous scrap demand offset reduced consumption by most major steelmaking regions, apart from the US.

US ferrous scrap rose by 1pc on the year to 60.7mn t in 2019, a slightly lower rate than its 1.5pc rise in crude steel production.

By contrast, ferrous scrap consumption in the EU-28 countries fell by 3.7pc to 87.5mn t against a crude steel production drop of 4.9pc. Japan's steel scrap usage decreased by 7.7pc to 33.7mn t against a 4.8pc crude steel production fall, while South Korean ferrous scrap consumption dropped by 4.7pc to 28.5mn t against a 1.4pc decline in steel output.

Turkish ferrous scrap consumption declined by 10.9pc to 27.9mn t while crude steel output fell by 9.6pc as the country continued to struggle with the impact of the 2018 lira crisis. Russian steel scrap consumption also fell, by 4.3pc to 30.4mn t, against a 0.8pc drop in crude steel output.

The proportion of ferrous scrap used in overall crude steel production declined across all markets where scrap consumption decreased.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

05/05/25

US vehicle sales slip in April from 4-year high

US vehicle sales slip in April from 4-year high

Houston, 5 May (Argus) — Domestic sales of light vehicles in April slipped from a four-year high the prior month but still reflected robust purchasing ahead of planned implementation of more US tariffs on the automotive industry. Sales of light vehicles — trucks and cars — dipped to a seasonally adjusted rate of 17.3mn units in April, down from 17.8mn in March, the Bureau of Economic Analysis reported today. Last month's total still was above April 2024's annualized rate of 16mn and was the second-highest monthly reading since April 2021. US consumers maintained steady purchasing last month in a rush to beat 25pc tariffs on imports of vehicle parts that were set to be implemented on 3 May. Those higher duties are expected to raise input costs for domestic automakers, and thus, prices for buyers. US president Donald Trump early last week signed an order that allows vehicle manufacturers to partially recoup tariff-related costs, helping to ease the burden. Still, Trump maintained his goal of forcing US automakers to become wholly reliant on auto parts made in the US. Trump already instituted 25pc tariffs on imports of foreign-made vehicles on 3 April. Tariff-related pressures have dented US consumer sentiment and weighed on domestic manufacturing activity, but certain pockets of the economy have shown resilience such as the services industry and employment. Truck sales last month fell by 1.9pc sequentially to 14.4mn unit rate, while car sales dropped by 8.8pc to a 2.9mn unit rate. Domestic vehicle production fell to a seasonally adjusted annual rate of 10.07mn from an upwardly revised 10.09mn in February, according to US Federal Reserve data. That compares with 11.08mn in March 2024. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Ford expects $1.5bn tariff hit in 2025


05/05/25
05/05/25

Ford expects $1.5bn tariff hit in 2025

Pittsburgh, 5 May (Argus) — Ford expects tariffs to cost the US automaker about $1.5bn in profit this year, causing the firm to withdraw its full-year financial guidance today. Tariffs and the uncertain rollout of potential changes to those tariff caused the Dearborn, Michigan-based company to suspend its 2025 guidance, which was initially projected at $7bn-8.5bn in earnings before interest and taxes. US president Donald Trump has place 25pc import taxes on vehicles, steel and aluminum, placing immense pressure on US automakers, many of whom have operations in Mexico and Canada. Ford is the third major US automaker to rescind its financial guidance in the past week following similar decisions by Stellantis and General Motors . By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexico's manufacturing contraction deepens in April


05/05/25
05/05/25

Mexico's manufacturing contraction deepens in April

Mexico City, 5 May (Argus) — Activity in Mexico's manufacturing sector shrank for a 13th straight month in April, with declines accelerating in production and new orders, according to a survey of purchasing managers. The manufacturing purchasing managers' index (PMI) fell to 45.5 in April from 46.9 in March, finance executives' association IMEF said, moving further below the 50-point threshold that separates growth from contraction. US tariffs imposed since March are adding pressure to Mexico's manufacturing sector, which makes up about a fifth of the national economy. The auto industry, responsible for roughly 18pc of manufacturing GDP, may be the hardest hit by the new measures, including a 25pc tariff on auto parts that took effect 3 May. Mexico remains the top exporter of vehicles to the US, supplying 23pc of all US auto imports in 2024. But IMEF said tariffs compound broader, mostly domestic headwinds, including reduced public spending and investor uncertainty stemming from sweeping legal and regulatory reforms. New investment has stalled since late 2024. The PMI index for new orders fell by 2.5 points to 41.8, the lowest since June 2020. Production dropped by 2.5 points to 43.6, while employment fell by 0.6 point to 46.4. New orders and production have now been in contraction for 14 straight months, and employment for 15. Inventories saw the steepest drop in April, falling 4 points to 46.3 — sliding from expansion to contraction — as manufacturers accelerated shipments after tariff implementation dates were confirmed. IMEF's non-manufacturing PMI — which covers services and commerce — remained in contraction for a fifth consecutive month but edged up by 0.5 points to 49.0 in April. Within that index, new orders rose by 0.6 points to 48.1, employment increased 1.3 points to 48.6 and production held steady at 47.5. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Australia's Labor win may aid low-carbon Fe, Al sectors


05/05/25
05/05/25

Australia's Labor win may aid low-carbon Fe, Al sectors

Sydney, 5 May (Argus) — The Australian Labor party's victory in the country's 3 May parliamentary election could support low-carbon iron and aluminium developers, providing policy clarity and public capital to the sectors. Labor's victory provides more certainty around Australia's A$14bn ($9.06bn) green hydrogen subsidy scheme, which will help steel producers transition towards hydrogen-powered steel furnaces. The opposition Coalition during the election pledged to scrap the programme, which will allow producers to claim A$2/t of green hydrogen produced from 2027. Australian steelmaker NeoSmelt and South Korean steelmaker Posco are developing electric iron smelters in Western Australia (WA) that produce hot-briquetted iron, which is used in the green steel process. Both projects will initially rely on natural gas but may transition to hydrogen-based processing as hydrogen production rises. Australia's hydrogen tax credits may prove crucial given ongoing hydrogen production challenges. South Australia's state government closed its Office of Hydrogen Power SA on 2 May, following a funding cut earlier this year. Labor can now also move forward with plans for A$2bn in low-emissions aluminium production credits, beginning in 2028-29. Smelters will be able to claim credits per tonne of low-carbon aluminium produced, based on their Scope 2 emission reductions. The party's proposal does not include any blanket credit for producers. Labor's aluminium production credits are aimed at supporting the Australian government's goal of doubling the country's share of renewable power from about 40pc to 82pc by 2030. Australian producers export about 1.5mn t/yr of aluminium, according to industry body Australian Aluminium Council, from four smelters located around the country. Green iron funding Labor's election win also secures its A$1bn lower-emission iron support pledge , first announced in late February. Half of the fund will go towards restarting and transitioning the 1.2mn t/yr Whyalla steelworks in South Australia into a green steel plant. The other half will support new and existing green iron and steel projects to overcome initial funding barriers. Labor has not allocated any funding through the programme yet. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Cliffs to idle 3 US steel mills this summer


02/05/25
02/05/25

Cliffs to idle 3 US steel mills this summer

Houston, 2 May (Argus) — Integrated steelmaker Cleveland-Cliffs will indefinitely idle its Conshohocken, Riverdale, and Steelton steel mills this summer in response to weak demand for the products produced at the mills. The idlings will impact about 950 workers spread across the 700,000 short ton (st)/yr Riverdale high-carbon coil mill in Illinois, the 500,000st/yr Conshohocken specialty plate mill in Pennsylvania and the 300,000st/yr Steelton, Pennsylvania railroad rail mill, a company spokesperson told Argus . Cliffs said the moves are temporary and will begin at the end of the required 60-day WARN notice periods in their respective states — on or about 30 June. By Marialuisa Rincon Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more