Latest Market News

Turkey ferrous: Price up on six deals

  • Spanish Market: Metals
  • 07/04/21

The Turkish scrap import price increased significantly today on six deals concluded mid-week as the global steel complex continued to strengthen and domestic rebar sales in Turkey picked up.

The Argus daily HMS 1/2 80:20 cfr Turkey steel scrap assessment increased $8.90/t to $432.40/t cfr.

A Russian supplier was heard to sell HMS 1/2 80:20 at $428/t cfr Iskenderun for May shipment.

A continental European supplier was heard to sell 20,000t of HMS 1/2 80:20, 11,000t of shred, 8,000t of bonus and 2,000t of busheling at an average price of $433/t cfr Izmir for May shipment.

A second continental European supplier was heard to sell 10,000t of HMS 1/2 80:20 at $431/t and 5,000t of bonus at $441/t cfr Samsun for May shipment. The price level is significantly higher than the other continental European sale, potentially indicating the lack of suitable offers for this buyer but also potentially the added freight to get to Samsun compared to other Turkish destinations like Marmara, particularly for a cargo of only 15,000t.

A US supplier was heard to sell HMS 1/2 80:20 at $435/t and shred at $445/t cfr Marmara for May shipment, indicating the $10/t spread returning between HMS 1/2 80:20 and shred prices.

A second US supplier was heard to sell 13,000t of HMS 1/2 80:20, 15,000t of shred and 3,000t of bonus at an average price of $439/t cfr Samsun for May shipment.

A Baltic supplier was heard to sell 16,000t of HMS 1/2 80:20, 8,500t of shred, 4,500t of bonus, 3,500t of rail road scrap and 2,500t of a mix of busheling and new cuttings at an average price of $436/t cfr Iskenderun for May shipment.

A total of 11 deep-sea cargoes have been recorded for May shipment so far. A total of 33 cargoes were recorded for April shipment although some of these had latest 5 May shipment assigned.

The jump in the Turkish scrap price today brought the market more closely into line with the stronger global steel price dynamics that have emerged over the past two weeks.

Shanghai domestic rebar prices have increased Yn350/t, around $54/t, during the period since mid-March in which Argus' cfr Turkey steel scrap assessment has increased $17.40/t from $415/t cfr to $432.40/t cfr today. This indicates a significant amount of room for scrap import prices to increase a lot further. The pace of the increase will very much depend on how many scrap offers mills receive in the next day or two.

Some deep-sea scrap suppliers only targeted sales today at a maximum of $435/t cfr Turkey for premium HMS 1/2 80:20 despite the strength of other scrap markets and the Chinese steel complex, which indicates the pace of any further Turkish scrap price increase is not yet likely to accelerate rapidly. Any sharp increase in Turkish demand could jeopardise the margins of several deep-sea scrap suppliers from the UK and continental Europe which have made multiple sales in the past two weeks, because of the effect strengthening global demand would have on dockside purchasing prices.

The move above $430/t renewed discussion among some market participants as to why many scrap suppliers were content to sell in a low to mid-$420s/t last week after a US sale was heard done at $430/t on 29 March, particularly given the strength of Turkish scrap-steel margins at the time. At least eight deep-sea and short-sea deals were concluded at lower equivalent prices than that US sale on 29 March. And many suppliers sold at around $415/t cfr Turkey a week prior.

But the depreciation of the euro against the US dollar combined with weaker Turkish domestic rebar sales provided ample basis for a temporary downward correction in some scrap deal prices to Turkey last week. Both of those pressures have disappeared in the past two days.

The euro continued to appreciate against the US dollar today having changed direction at the start of this week, reaching almost EUR1.19:$1 as of 15:45 BST.

And Turkish domestic rebar demand significantly increased today and yesterday. Argus reported since the second week of March that domestic rebar demand would likely increase in Turkey in the first week of April.

A Marmara mill sold 5,000-7,000t of rebar locally at $625/t ex-works excluding VAT today. A second Marmara mill closed sales early in the day. A third Marmara mill offered $610/t ex-works in the Biga region, indicating that it will likely have attracted even stronger demand.

Most mills preferred not to sell large volume for the moment because of how strong the demand has become. Turkish mills are set make multiple export and domestic rebar sales in the coming days at increasingly higher price levels. Turkish export rebar prices have only increased $10/t during the time Chinese domestic rebar prices have increased $54/t, which means Turkish offers into regions such as southeast Asia will be extremely competitive.

Short-sea scrap offers to Turkey increased today after lower-priced deals were done at the start of the week, with Romanian and Bulgarian HMS 1/2 80:20 offered at $415/t cif Marmara today.

The Argus daily A3 cif Marmara steel scrap assessment increased $8.50/t to $412.50/t.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

06/09/24

Indian state approves chip, EV manufacturing plants

Indian state approves chip, EV manufacturing plants

London, 6 September (Argus) — The Maharashtra state cabinet in India has approved three foreign investment manufacturing projects — a $1bn semiconductor plant and two battery electric vehicle (EV) and hybrid vehicle factories. The semiconductor chip plant, a joint venture between Israel-based Tower Semiconductor and Indian industrial conglomerate Adani Group, is planned to be built in two phases. The 587.63bn rupees ($7bn) first phase will have a production capacity of 40,000 wafers/month and the Rs251.84bn second phase will add another 40,000 wafers/month, the state's deputy chief minister, Devendra Fadnavis, announced. The facility, to be located outside Mumbai, will be the second semiconductor fabrication plant in the country. The project still needs approval from the central government and Ministry of Electronics and IT, which plans to revise its semiconductor incentives. The project is designed to capitalise on the Indian government's plans to establish a domestic semiconductor manufacturing supply chain, driven by strong local demand in the electronics, EV and manufacturing sectors. Earlier this week, the Indian cabinet approved a proposal from Kaynes Semicon to set up a chip assembly, testing and packaging plant in Gujarat. The Rs33bn plant will have a capacity to handle 6mn chips/d. The governments of India and Singapore on Thursday signed an agreement to co-operate on semiconductor industry development and supply chain resilience, with an eye to Singaporean companies investing in Indian production. The two automotive plants that were also approved by Maharashtra state will be built by Skoda Auto Volkswagen India and Toyota Kirloskar, which is a joint venture between Japan's Toyota Motor and local firm Kirloskar Systems. The Rs150bn Skoda facility in the city of Pune will produce battery electric and hybrid cars. The company already has plants in Pune and Chhatrapati Sambhaji Nagar (previously named Aurangabad), which produce 180,000 cars and 60,000 cars, respectively. The Rs212.73bn Toyota plant will be built in Chhatrapati Sambhaji Nagar and will manufacture battery EVs, hybrids, plug-in hybrids and fuel cell vehicles. The announcement comes after the company signed an initial agreement with the Government of Maharashtra in July to explore setting up a new manufacturing plant in the city. The company operates two automotive plants in Bidadi in the state of Karnataka with an annual installed capacity of 3.42mn vehicles/yr and plans to build a third plant in the town to start operations in 2026 with a capacity of 1mn units/yr. The new plants reflect Toyota Kirloskar's growing product portfolio at it expands into EV manufacturing, rising consumer demand and an increase in exports, the company said. By Nicole Willing Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US adds 142,000 jobs in August, unemployment at 4.2pc


06/09/24
06/09/24

US adds 142,000 jobs in August, unemployment at 4.2pc

Houston, 6 September (Argus) — The US added 142,000 nonfarm jobs in August, fewer than forecast, raising the odds of a half-point rate cut at the Federal Reserve's policy meeting in two weeks. The job gains followed downwardly revised gains of 118,000 for June and 89,000 for July, for combined losses of 86,000 for the two prior months, according to the Labor Department. The gains in August were below the average monthly gain of 202,000 for the prior 12 months. The unemployment rate ticked down to 4.2pc in August from 4.3pc in July, still near five-decade lows of 3.4pc reached in early 2023. The gains were slightly lower than the 160,000 job gains forecast in a survey by Trading Economics, increasing the odds of a 50 basis point cut in the target rate to 45pc probability today from 40pc Thursday, according to the CME FedWatch tool. Odds of a quarter point cut fell to 55pc today from 60pc the day prior. Fed policy makers in late July kept their target rate unchanged at a 23-year high, but Fed chair Jerome Powell told a bankers symposium last month that the "time has come for policy to adjust," his clearest signal that the Fed is ready to begin lowering borrowing costs as inflation has slowed markedly and the labor market was beginning to show signs of weakening. A rate cut after the 18 September Fed meeting would come less than two months before the US presidential election on 5 November. Job gains were reported in construction and health care. Health care added 31,000 jobs in August, about half the monthly gain in the prior year. Construction added 34,000 jobs, more than the average. Manufacturing jobs fell by 24,000 in August. Employment was little changed in other major industries, including mining and oil and gas extraction. Average hourly earnings increased by 3.8pc over the 12 months ending in August, up from 3.6pc through July. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

PCC BakkiSilicon calls for trade defence on Chinese Si


06/09/24
06/09/24

PCC BakkiSilicon calls for trade defence on Chinese Si

London, 6 September (Argus) — Iceland's PCC BakkiSilicon has renewed its call for political support to apply increased anti-dumping duties on silicon metal from China, produced at lower prices with higher emissions, after PCC received an International Sustainability and Carbon Certification (ISCC) certifying its CO2 equivalent footprint. PCC BakkiSilicon — the Icelandic subsidiary of Germany's PCC SE — is discussing protective measures on an EU level through industry association Euroalliages, and directly with the German and Icelandic governments, a company representative told Argus . "Protective measures for the silicon industry should consist of an increase of anti-dumping duties from China," the representative said. "As well as stronger measures to comply with supply chain law requirements to prevent imports of material that is being produced under violation of human rights, work safety and environmental standards," they added. Silicon metal imported into the EU from China is already subject to an anti-dumping duty of 16.8pc (or 16.3pc for Datong Jinneng Industrial Silicon) originally imposed on 1 July 2016, and renewed on 11 August 2022 after a request for review from Euroalliages. Anti-dumping measures are usually imposed for five years, but interested parties may ask for an interim review provided that there is sufficient evidence of changed circumstances. Interim reviews usually concern the level of duty in force, but can also extend to injury, scope and form of measures. Whether an interim review can be requested remains open at the time being, the PCC representative said. The renewed political plea comes as PCC is the first silicon producer to receive ISCC Carbon Footprint Certification, confirming a footprint of 3,102.56kg CO2 equivalent (CO2e) per t of silicon metal — as produced in the reference period from 1 July 2022 to 30 June 2023. This is compared with a global industry average of 10,900kg CO2e/t of silicon metal, according to PCC, and the company estimates that Chinese manufacturers are operating far above this number. "The material produced so efficiently in environmental terms by PCC in Iceland is rarely measured by customers in Europe against criteria such as sustainability or climate protection, but still only against price," PCC SE chief executive Peter Wenzel said. By Samuel Wood Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan approves $2.4bn for EV battery projects


06/09/24
06/09/24

Japan approves $2.4bn for EV battery projects

Tokyo, 6 September (Argus) — The Japanese government has approved to fund a maximum of ¥347.9bn ($2.4bn) for electric vehicle (EV) battery investments, in a bid to build out 150 GWh/yr of domestic output capacity by 2030. A total of 12 projects will be subsidised, according to the ministry of trade and industry (Meti) on 6 September. This includes lithium-ion (Li-ion) battery cell production by a consortium of battery producer Panasonic and auto manufacturer Subaru ( see table ). Around ¥326bn will be allocated for Li-ion battery production, including lithium iron phosphate (LFP) batteries. Some ¥17bn for raw material production, such as electrolyte and ¥5bn for manufacturing equipment, will be financed, Meti said. The funding is part of Meti's wider battery strategy that aims to build out 150 GWh/yr of battery production capacity domestically by 2030. The projects being subsidised are expected to lift total capacity to 120 GWh/yr from 85 GWh/yr currently once they begin operations, a Meti official said. To achieve 150 GWh/yr target, the country needs to secure 100,000 t/yr of lithium, 90,000 t/yr of nickel, 150,000 t/yr of graphite, 20,000 t/yr of cobalt and 20,000 t/yr of manganese, according to Meti. The battery strategy is part of pricing policy across industries based on Japan's Green Transformation Initiative, a policy to promote decarbonisation. Japan by 2030 aims to set a battery pack price for EVs at ¥10,000/kWh or less to make EV prices competitive with gasoline cars, and for storage batteries for industrial facilities at ¥60,000/kWh. Domestic battery production will be an essential factor to meet those targets by reducing cost. Meti's battery strategy also aims to reduce foreign dependency for the battery supply chain, in line with the country's economic security law that designated batteries a critical resource in December 2022. By Yusuke Maekawa Japan EV battery projects with subsidy Project owner Product Capacity (GWh/yr) **** Project cost (¥bn) Government funds (¥bn) Expected year to start supplying Panasonic/Subaru lithium-ion battery cell 16.0 463.0 156.4 Aug '28 Panasonic/Mazda lithium-ion battery cell 6.5 83.3 28.3 July '25 Nissan LFP (lithium-iron phosphate) 5.0 153.3 55.7 July '28 Toyota/PPES*/PEVE** Next generation battery/ASSB*** 9/n.a 245.0 85.6 Nov '26 Nippon Shokubai Electrolyte 21.4 37.5 12.5 July '28 Toagosei Binder 142.0 3.8 1.3 Oct '26 artience/Toyocolor a) Conductive agents, b)carbon nano-tube a) for cathode 40, for anode 17, b) 120 8.8 2.9 a) Dec '27 (cathode), Sep '26 (anode), b) Jan '27 Kaga Explosion-proof cover cap 3.1 0.6 0.2 Oct '25 Ricoh/Seibu Giken Battery manufacturing equipment 3.0 4.7 2.3 Sep '27 Kyoto Seisakusho Battery manufacturing equipment 21.0 5.4 1.9 Jul '26 Soft Energy Controls Battery manufacturing equipment 18.0 0.8 0.4 Apr '25 Marui Sangyo Battery manufacturing equipment 8.0 0.8 0.4 Apr '26 * PEVE=Primearth EV Energy **PPES=Prime Planet Energy & Solutions *** All-solid-state-battery **** battery equivalent for raw material and battery manufacturing equipment Source: Meti Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

E-VAC secures $335mn for US permanent magnet plant


05/09/24
05/09/24

E-VAC secures $335mn for US permanent magnet plant

Houston, 5 September (Argus) — Battery technology manufacturer E-VAC Magnetics secured $335mn in funding to help construct its facility in South Carolina, where it plans on producing neodymium-iron-boron (NdFeB) permanent magnets starting in 2025. The non-recourse financing — announced Thursday — was obtained by US-based private equity firm Ara Partners, which owns E-VAC's German-based parent company Vacuumschmelze (VAC). The plant, which is scheduled to come on line in fall 2025, primarily will support several models of General Motors' (GM) line of electric vehicles (EV) over a 10-year period. GM and VAC entered into a binding supply agreement in September 2023, under which the latter agreed to build a manufacturing facility in North America. E-VAC will source rare earths and other raw materials from local sources, it has said. The company has received over $200mn from the US Defense Department and US Energy Department for the project, as the US seeks to reduce its reliance on China for critical components needed for defense and electrification applications. The company also signed a deal to recycle permanent magnets through Cyclic Materials, helping to create a circular supply chain for rare earth elements in North America. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more