US steel prices rising despite higher mill utilization
When US steel production returned to pre-Covid levels, many in the US steel industry said that would mark the beginning of a plateauing of the unprecedented 10-month rally in prices.
So far, they have been wrong.
For the last three weeks the US steel capacity utilization rate has remained at or above pre-pandemic levels of 80pc, according to the American Iron and Steel Institute (AISI). The higher utilization rate indicates that there is more steel available for buyers in a previously supply-constrained market.
Over those three weeks, the Argus US Midwest hot-rolled coil (HRC) assessment has increased by 2pc, or $33.75/short ton (st). That is similar to a typical pre-pandemic price increase, which generally were $40/st when announced by steelmakers.
The unprecedented price rally--which has led prices to nearly quadruple since hitting a low of $450/st in mid-August 2020--has continued uninterrupted, and some wonder what it will take to stop it.
Indiana-based electric arc furnace (EAF) minimill steelmaker Steel Dynamics (SDI) said today that it expects to post record profits in the second quarter and that continued demand and "historically low flat roll steel inventories" will lead to even stronger third quarter results.
SDI's note on low inventories has been echoed by steel service centers across the country. With steel prices at record highs, few if any buyers are looking to restock depleted steel inventories with product that has does not already have a buyer. One service center told Argus that in the last week it was offered 240st of cold-rolled coil (CRC), but only bought 100st because it could not find buyers for the remainder.
Concerns have also grown that supply could get even tighter. North American automakers are in the fifth month of dealing with semiconductor-related production disruptions, which have cut volumes at some steel processors and made some steel available on the spot market. Recently some companies have taken steps to return idled auto production online, with Ford restarting production of its best-selling F-150 full-size pickup truck, while General Motors plans to ramp up its full-size truck production in mid-July.
The automakers are trying to make up for lost ground, with approximately 755,000 vehicles marked as unrecoverable by consultancy AutoForecast Solutions due to the semiconductor-related production cutbacks. New vehicle inventory coming into June sat at 1.78mn vehicles, or 35 days supply, a historically low level and down from the 2.24mn in inventories at the end of April, according to Cox Automotive.
This could lead to suppressed auto demand for steel rebounding in the coming weeks, potentially tightening the spot steel market further.
Imports, which traditionally have come into the US during times of high prices as a lower-cost alternative, have also not been arriving in sufficient numbers or at substantial discounts to impact the domestic market.
Increased costs due to rising global prices coupled with the 25pc Section 232 steel tariffs imposed by then-president Donald Trump in March 2018 have kept many imports at bay.
Prices for HRC fob Tianjin, China, have risen by 41pc since mid-February to $905/metric tonne (t) ($821/st). HRC prices fob Turkey are at $1,110/t, 51pc higher than their mid-February price level.
In Europe, tight supply has led HRC ex-works Italy prices to rise to €1,120/t ($1,343.63/t), up 61pc from mid-February, while HRC ex-works northwest Europe has increased by 65pc since mid-February to €1,166.25/t.
In April, total steel imports into the US were just under 2.4mn t (2.64mn st), a 5pc decline compared to a year prior, according to US Commerce Department data. But hot-rolled sheet imports totaled 206,000t, nearly double the 105,000t imported in the same period of 2020. Year-to-date through April, total steel imports have increased by less than a percentage point to 8.42mn t compared to the same period of 2020, while imports of hot-rolled sheet--the building block for all other flat rolled products--have risen by 32pc to 697,000t.
Some traders said an increase in flat-rolled US imports should show up from June through August, as tons booked earlier in the year are unloaded. But few believe they will come in enough quantity--or at the right price--to fill the gaping inventory hole left by pandemic austerity and high-price anxiety.
Related news posts
Fortescue hold firms on 2024-25 iron ore target
Fortescue hold firms on 2024-25 iron ore target
Beijing, 30 August (Argus) — Australian iron ore producer Fortescue has reiterated its iron ore shipment target for the 2024-25 fiscal year ending 30 June of 190mn-200mn t, including 5mn-9mn t from its Iron Bridge project on a 100pc basis. The Iron Bridge magnetite project in Western Australia shipped its first cargo in July last year, with Fortescue's iron ore shipments totalling 191.6mn t for the full year . It had targeted to ship 192mn-197mn t for 2023-24. The company achieved a hematite average revenue of $103/dry metric tonne (dmt), up by 9pc on a year earlier. Hematite C1 costs for 2023-24 rose by 4pc from the previous year to $18.24/wet metric tonne (wmt) because of higher labour rates and mine plan driven cost escalation, although Fortescue said its cost control measures offset the partial increase. It forecasts hematite C1 costs for 2024-25 to rise to $18.50-19.75/wmt. The Argus ICX seaborne iron ore fines assessment for 62pc Fe cfr Qingdao averaged $119.40/dmt for 2023-24. Fortescue is on track to achieve real zero, or no fossil fuels and no offsets, for its scope 1 and 2 terrestrial emissions across its Australian iron ore operations by 2030. It is aiming to achieve this with building a new solar farm, deployment of electric excavators and the use of battery electric and hydrogen fuel cell haul truck prototypes. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US OCTG, line pipe imports fall in July
US OCTG, line pipe imports fall in July
Houston, 29 August (Argus) — Preliminary data from the US Department of Commerce shows that imports of oil country tubular goods (OCTG) and line pipe products fell in July. OCTG volumes fell by 88,100 metric tonnes (t) from the prior year, as volumes from Japan dropped by 15,500t, South Korea and Thailand both dropped by 13,500t, and volumes from Vietnam and Mexico fell by 11,300t and 9,300t, respectively. Volumes of line pipe less than or equal to 16in fell by 12,300t, as Italian volumes dropped by 4,500t, Ukraine dropped to zero from 4,400t in the prior year, and Brazilian volumes fell by 3,100t. Standard pipe imports increased by 13,400t on a 7,900t increase from Turkey. Heavy structural shape volumes jumped by 39,700t as Spanish volumes increased by 21,700t from the prior year, and imports from Germany rose by 9,200t. By Rye Druzchetta US pipe and tube imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 OCTG 95,792 183,909 -88,117 -47.9% 126,760 Line pipe 69,387 80,875 -11,488 -14.2% 87,976 Standard 66,100 52,716 13,384 25.4% 76,317 Heavy Structural Shapes 107,979 68,253 39,726 58.2% 54,096 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Line pipe is all diameters. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Higher flats volumes lead US steel imports up
Higher flats volumes lead US steel imports up
Houston, 29 August (Argus) — Higher volumes of flat steel imports led overall US steel imports higher in July. Total US steel imports for consumption were 2.2mn metric tonnes (t) in July, according to preliminary data from the US Department of Commerce. Hot-rolled coil (HRC) imports rose by 22,600t from the prior year, driven by a 32,900t jump in Japanese volumes, which were offset slightly by a 9,200t drop from Canada. Cold-rolled coil (CRC) volumes were up by 37,000t in July, with Canada exporting 8,800t more than the prior year. Hot-dipped galvanized (HDG) coil imports from Brazil jumped by 17,200t from the prior year, while volumes from Mexico rose by 13,000t. Volumes of blooms, billets and slabs dropped by 121,900t, as Mexico's volumes dropped to zero from 95,800t in the prior year. By Rye Druzchetta US steel imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 HRC 156,952 134,326 22,626 16.8% 156,861 CRC 172,746 135,778 36,968 27.2% 113,400 HDG 233,511 165,607 67,904 41.0% 238,809 Blooms, billets, slabs 364,138 486,053 -121,915 -25.1% 395,478 Total (all items)* 2,197,347 2,153,126 44,221 2.1% 1,955,800 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
ThyssenKrupp Steel executives leave as tensions rise
ThyssenKrupp Steel executives leave as tensions rise
London, 29 August (Argus) — Seven board and supervisory board members of ThyssenKrupp Steel Europe have left their positions given deepening strife with the chief executive of parent company ThyssenKrupp. There has been an ongoing dispute between ThyssenKrupp chief executive Miguel Lopez and board members of ThyssenKrupp Steel Europe, including the latter's chief executive Bernhard Osburg, for some months now over the future of the business. Osburg and two other board members from Steel Europe have now stepped down, as has the chairman of the Steel Europe supervisory board Sigmar Gabriel and three other supervisory board members. The members have "lost all confidence in the will and ability of the chairman of the executive board of ThyssenKrupp AG to co-operate appropriately", Gabriel said in a note after a meeting today. He said Lopez has carried out an "unprecedented" and public campaign against the executive board of Steel Europe, damaging its ability to act and breaching trust. The Steel Europe board had proposed a plan to align the business' production to its recent shipments, meaning a decline from about 12mn t/yr to 9mn t/yr, and to exit from steelmaker HKM's joint venture with Salzgitter and Vallourec. HKM is viewed as a high-cost slab producer. However, Lopez felt the plans did not go far enough to restructure the business, calling for a deeper reorganisation and reduction in headcount. A spokesperson for union IG Metall said it "strongly" supports Osburg and the outgoing chairman, and criticises the actions of Lopez. The union is not legally allowed to call for strike action, but has called for protests over the departures. One executive said the dispute could threaten the future of Steel Europe as an entity. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
![](/_next/image?url=%2F-%2Fmedia%2Fproject%2Fargusmedia%2Fmainsite%2Fimages%2F14-generic-hero-banners%2Fherobanner_1600x530_generic-c.jpg%3Fh%3D530%26iar%3D0%26w%3D1600%26rev%3D-1%26hash%3DFC2BEDE406483FEF5FDB9549159BAC11&w=3840&q=75)
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more