Generic Hero BannerGeneric Hero Banner
Latest Market News

Mitsui Chemical to close Japanese PTA plant

  • Spanish Market: Petrochemicals
  • 21/03/22

Japanese petrochemical producer Mitsui Chemical plans to stop purified terephthalic acid (PTA) production permanently in Japan from August 2023 by closing the 400,000 t/yr production line at its Iwakuni Ohtake petrochemical complex in Japan's southern Yamaguchi prefecture.

With this closure, fellow petrochemical producer Toray's 280,000t/yr production line at Aichi will be the last PTA unit in Japan. Massive expansion of PTA capacities from the early 2000s in northeast Asia, particularly in China, has led to increased market competition and squeezed production margins. Japanese polyester production has also been falling in recent years, contracting domestic PTA demand.

Mitsui Chemical began its PTA production in 1958 and used to be the largest Japanese producer with a total capacity of 750,000 t/yr in the early 2000s. But squeezed PTA production margins led to rationalisation measures that started in 2008. This included the shutdowns of two PTA production lines in 2008 and 2013, respectively, with a total capacity of 350,000 t/yr at the Iwakuni-Ohtake complex, and stake sales at Mitsui Chemical's joint-ventured PTA production lines in Indonesia and Thailand in 2014 and 2018.

After the shutdown of this 400,000 t/yr line, Mitsui Chemical will only hold a 26pc stake at GC-M PTA, the joint venture of Mitsui Chemical and Thailand's PTTGC. PTTGC holds the remaining 74pc stake. GC-M PTA owns three production lines with a total capacity of 1.45mn t/yr at Map Ta Phut in Thailand.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

12/05/25

Naphtha no longer competitive feedstock: Braskem

Naphtha no longer competitive feedstock: Braskem

Sao Paulo, 12 May (Argus) — Brazil-based petrochemical producer Braskem is pursuing a strategic shift in polymers production by favoring natural gas liquid (NGL) feedstocks and moving away from naphtha. Naphtha is no longer a competitive feedstock in the petrochemical sector, driving the need for greater flexibility in raw material sourcing, chief executive Roberto Ramos said Monday on the company's first-quarter earnings call. The transition to lighter feedstocks is part of a broader initiative to enhance efficiency, reduce costs, and improve competitiveness amid evolving global petrochemical dynamics, Ramos said. The company's plan focuses on increasing the use of ethane and propane as primary feedstocks in Mexico and Brazil. In Mexico, Braskem has inaugurated an ethane import terminal, which will provide a stable supply to its operations. The facility has the capacity to store 80,000 b/d of ethane, while the polyethylene (PE) plant processes 66,000 b/d. This surplus storage has prompted considerations for a new PE unit in Mexico to maximize the available feedstock. In Brazil, Braskem aims to reduce reliance on naphtha-based PE production by integrating more natural gas-derived inputs. The company is evaluating projects to utilize feedstocks sourced from shale gas extracted in Argentina's Vaca Muerta formation. The petrochemical complex in Rio Grande do Sul, which operates with a mixture of naphtha and natural gas, is among the facilities targeted for increased gas utilization. Braskem's Rio de Janeiro facility is also undergoing expansion of its gas-based assets, adding two new furnaces that crack ethane and propane to increase capacity to 700,000 t/yr. This increased production is anticipated to lower unit production costs and improve profitability. The move to gas-based production is expected to optimize operations and align Braskem's facilities with cost-effective supply chains, Ramos said. The shift comes as global trade dynamics continue to influence raw material availability. While US-China trade agreements have temporarily eased tariff pressures, Braskem is trying to position itself to navigate long-term supply chain uncertainties by diversifying its production inputs. Ramos has also indicated potential investments in ethanol dehydration technology, which would allow select facilities to convert ethanol into ethylene, further supporting PE production with an alternative renewable feedstock. Production and sales Braskem said its first-quarter domestic resin sales fell by 4pc from the same period in 2024, but sales were little changed from the prior quarter. Domestic resin sales totalled 807,000 metric tonnes (t) in the first quarter, down from 839,000t a year earlier. Resin sales volumes remained in line with the fourth quarter last year, but the company highlighted a quarter-on-quarter increase in PE and polypropylene (PP) sales volumes of 2pc and 3pc, respectively, offset by a 16pc reduction in PVC sales. In Mexico, Braskem Idesa's PE sales fell by 11pc from the same period in 2024 and by 5pc quarter-on-quarter, as the company is looking to manage inventory ahead of a planned maintenance shutdown in the second quarter. The plant utilization rate reached 79pc, rising from the fourth quarter on higher ethane availability through the Fast Track solution. But utilization fell by four percentage points year-on-year, mainly due to reduced supply of ethane from Mexico's Pemex. Braskem posted a first-quarter profit of $114mn, rebounding from a loss of $273mn a year earlier and a loss of $967mn in the fourth quarter last year. By Fred Fernandes Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

EU consults on tariffs for €95bn US imports


09/05/25
09/05/25

EU consults on tariffs for €95bn US imports

Brussels, 9 May (Argus) — The European Commission is consulting on an extensive list, worth €95bn ($107bn), of US industrial, agricultural and other imports that could be subject to tariff countermeasures. The long list includes extends from livestock, biofuels, wood pellets to metals, aircraft, tankers and polymers . The consultation runs until midday on 10 June. It is aimed at stakeholders affected by US measures and possible EU rebalancing measures. Also considered for possible countermeasures are restrictions, worth €4.4bn, on EU exports to the US of steel, iron and aluminium scrap, as well as toluidines, alcoholic solutions and enzymes (CN codes 7204, 7602, 292143, 330210 and 350790). The commission linked the possible new measures to US universal tariffs and to Washington's specific tariffs on cars and car parts. The commission said the public consultation is a necessary procedural step. It does not automatically result in countermeasures. The EU also launched a WTO dispute procedure against the US for Washington's universal tariffs, set at 20pc for EU goods and currently paused at 10pc, and at 25pc on all imports of vehicles and car parts. The commission will need approval by EU governments under a simplified legislative procedure. Officials say this will complete a legal act for the countermeasures, making them "ready to use" if talks with the US do not produce a "satisfactory" result. The list of products potentially targeted includes livestock, along with items ranging from spectacles to antiques. The 218-page list includes a range of agricultural and food products including oats, maize, and cereal pellets. Also included are biodiesel and wood pellets (CN codes 38260010, 44013100), as well as paper and cotton products. Aluminium, iron, steel are listed together with a wide range of other goods from gas turbines, ships propellers and blades, aircraft, sea-going tankers and other vessels. Polymers, copolymers, polyesters and other products are not spared (CN codes 39039090 and more). On 10 April, the EU paused its reciprocal tariffs against the US for 90 days, responding to a US pause. The EU notes that €379bn, or 70pc, of the bloc's exports to the US are currently subject to new or paused tariffs. By Dafydd ab Iago Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Chemicals, polymers part of EU tariff consultation


08/05/25
08/05/25

Chemicals, polymers part of EU tariff consultation

London, 8 May (Argus) — Polymer and chemical products are included in a European Commission public consultation on a list of US imports which could become subject to EU countermeasures, if ongoing EU-US negotiations do not result in a mutually beneficial outcome and the removal of the US tariffs. The consultation will remain open until 10 June, after which a final proposal will be made for the adoption of countermeasures and a legal act prepared for imposing them "in case negotiations with the US do not produce a satisfactory result". The list of additional products that could face import tariffs includes many polymers and some chemicals, although appears to target value more than volume. These additions include polypropylene homopolymer and copolymers (HS codes 39021000, 39023000), although these account for a relatively small volume of trade, at 114,000t in 2024, according to GTT data. Other polymer codes on the consultation list include some polystyrene, polyvinyl chloride, acrylonitrile butadiene styrene and polyethylene terephthalate products. Isocyanates and some polyurethanes are part of the consultation. Imports of acetic acid, a methanol derivative were included. EU 27 imports from the US in 2024 were 540,000t. Liquid caustic soda has been included. The EU 27 countries imported 540,000t in 2024. Benzene and xylenes have been included, but only under distinct "non-chemically defined" HS codes (27071000 and 27073000) and for which volumes are small. The European Union on 9 April announced a 90-day delay to a series of planned countermeasures specific to US tariffs on metals to allow space for negotiations. These are separate from the new consultation and remain poised to go ahead if negotiations fail. They included a 25pc tariff on imports from the US of polyethylene under codes representing nearly 1mnt of imports in 2024. By Alex Sands Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

OxyChem maintains demand estimates for 2025


08/05/25
08/05/25

OxyChem maintains demand estimates for 2025

Houston, 8 May (Argus) — US chemical producer OxyChem is maintaining expectations for demand growth in its key sectors this year and remains committed to its profit guidance despite various market challenges. OxyChem during its first quarter earnings call today said its full-year profit guidance is $900mn-$1bn, roughly in line with the $1bn midpoint guidance for 2025 it expected during its 2024 fourth quarter earnings call. The company said the performance of its chemical sector exceeded expectations for the first quarter, although winter weather disrupted production and stoked higher operating costs during the three-month period. Sales revenue totaled $1.19bn in the first quarter, less than 1pc higher than a year earlier. The company expects domestic polyvinyl chloride (PVC) consumption to grow by 4-5pc in 2025 from last year, while higher costs associated with first quarter disruptions were now over. But the company added there is still uncertainty around how demand, costs, and prices will overlap during the months ahead. Challenges to PVC prices persist because of China's increasing dominance in the global market. China's global PVC market share grew from virtually nothing in 2020 to roughly 30pc in 2024 as producers sold overbuilt domestic supply, OxyChem said. China's increased presence in the export market weighed on global PVC export prices, which eventually pressured domestic US contract prices, the company added. OxyChem anticipates caustic soda demand will mirror last year, but recent expansions in the wider industry could pressure prices. OxyChem reported a $185mn profit for the first quarter, 27pc lower than the same quarter a year earlier despite higher sales revenue. By Aaron May Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Shell to buy Freepoint pyrolysis oil in US: Update


08/05/25
08/05/25

Shell to buy Freepoint pyrolysis oil in US: Update

Adds Freepoint comment in second paragraph Houston, 8 May (Argus) — Freepoint Eco-Systems has agreed to provide Shell's polymer plant in Pennsylvania with "a steady supply" of pyrolysis oil produced in Hebron, Ohio, from chemically recycled plastic waste. Under the "landmark agreement", oil will be shipped to Shell's polymer plant in Monaca, Pennsylvania, where it will be used to make plastic, the company said. Shell under the deal is entitled to the Hebron plant's production capacity of 130mn lb/yr, Freepoint said Thursday. Freepoint's Hebron plant is still in its commissioning phase, but the company expects to produce up to its full capacity of pyrolysis oil upon completion later this year. Pyrolysis uses high heat to break down waste plastic into feedstocks that can be used to make virgin-like plastic material. Shell said the agreement reflected its commitment to increasing the circularity of plastics in its portfolio. On 22 April, Freepoint sent its first railcar of pyrolysis oil to Shell's plant in Norco, Louisiana. By Zach Kluver Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more