Latest Market News

Glassmaking decline to weigh on metals demand

  • Spanish Market: Metals
  • 15/05/23

Glass production in Europe has fallen from a record high reached in the second half of 2022 as the global industry faces tightening supply owing to high energy costs and supply chain disruptions.

Demand for glass from industries as diverse as food packaging, ceramics and solar panels continues to rise, but supply has become constrained, which has implications for the range of metals used in glass colouring, decolourisation and coatings.

Oxides of chromium, cobalt, manganese, titanium and vanadium are used in glass production, as well as selenium, cerium, copper, nickel and iron. Sulphurous compounds of lead, copper, cadmium and iron are used in the production of coloured glass. Platinum, platinum-rhodium alloys and iridium are used in production equipment and corrosion-resistant coatings. Lower glass production translates into lower demand for metals from manufacturers.

The energy crisis has had a substantial effect on glass production as an energy-intensive process. Gas and electricity supply accounts for around 24pc of output costs, according to the European Container Glass Federation.

The EU is the world's largest glass supplier, accounting for around a third of global production. Approximately 80pc of the glass manufactured is traded within the EU. Container glass accounts for around 60pc of EU glass output in terms of volume and around 54pc in terms of value, flat glass accounts for around 30pc by volume and value, and domestic glass, special glass, and reinforcement glass fibres account for the remainder. There are 162 container glass factories across 23 countries in Europe.

The largest producers in the region, such as Germany and Italy, are among the countries that depend on Russian gas imports.

Glass production in Germany has declined from a record high in April 2022, with the monthly production index for the manufacture of glass and glass products dropping from 110.4, according to Eurostat data. While the index ticked up to 107.5 in August from 105.6 in July and moved up to 103.4 in January from 102.5 in December, the value dropped to 97.8 in March, its lowest level since November 2021.

The index for Italy fell to 116.3 in March from a peak of 129.6 in August and 119.5 a year earlier. The production index for France fell to 103 in March from a high of 114.8 a year earlier.

Glass furnaces heat sand to 1,500-2,000°C and must run continuously to keep the glass in a liquid state, as switching off the furnace cools and solidifies the glass, damaging the ceramic equipment. Furnaces primarily use gas as their source of energy and cannot easily switch to electricity or renewable fuels such as biomass.

There are electric furnaces in operation for small production runs and over the long term the industry is looking to replace natural gas supply with renewable electricity, according to the European Container Glass Federation. The process will take time as glass manufacturing involves high start-up costs and the capital-intensive production facilities require long investment cycles.

The industry is calling for support measures at the EU and national levels to help it manage higher energy costs. While European natural gas prices have dropped from their record highs, they remain at wide premiums to their pre-crisis levels.

Two glass manufacturers in France — Arc International and Duralex — restarted their furnaces in April, after eight month and five-month shutdowns, respectively, in response to high gas prices. Both plants received support from the French government to resume operations, with Arc receiving a €10mn loan from the industry ministry. Duralex had an electricity hedging contract in place that allowed it to restart at more favourable prices during the second quarter. AGC Glass France closed the B2 unit of its Boussois plant in February after 21 years in operation. The B1 unit closed in 2020 owing to the Covid-19 pandemic but uses an oxy-combustion process that could allow it to potentially restart to "contribute to AGC's production process decarbonisation objectives by 2030", depending on market conditions, the company said.

AGC said in February that it has developed a technology with Saint-Gobain to convert flat glass production lines from using gas to low-carbon electricity. AGC plans to use the design to refurbish a patterned glass line in the Czech Republic to run on 50pc electricity and 50pc oxygen and gas by the second half of 2024.

Chinese glass production has been ramping up to meet the immediate global demand, but some manufacturers have also faced factory closures owing to energy supply problems and high shipping costs. Delays at US ports have further contributed to the supply crunch.

One sector of the glass industry where production is increasing is solar glass, as photovoltaic (PV) panel manufacturers have been able to pass on higher input costs to customers, given ongoing strong demand for solar PV installations around the world.

India-based Borosil Renewables said last week that it has increased the solar glass production capacity of its German unit, GMB Glasmanufaktur Brandenburg, to 350 t/d from 300 t/d, with a modification that will also reduce its energy consumption. Several Indian glassmakers have announced plans to move into the solar glass production sector.

There are plans for new facilities in Turkey and Canada, as well as the US, where Vitro Architectural Glass is investing $93.6mn to rebuild and modernise a production line at its plant in Pennsylvania. The company has an agreement to supply US solar equipment manufacturer First Solar with glass for its thin-film PV solar panels.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

21/11/24

US alleges Nippon dumped HRC at higher rates

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Recent deep-sea and short-sea cfr Turkey scrap deals


21/11/24
21/11/24

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output drops further in October


21/11/24
21/11/24

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ArcelorMittal could close two service centres in France


20/11/24
20/11/24

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Graphjet launches Malaysian biomass-to-graphite plant


20/11/24
20/11/24

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more