Europe longs: Mills expect firmer market

Spanish Market: Metals
03/04/24

Most European producers increased their offers for long products this week, anticipating demand to improve after the Easter holiday period and propped up by a rebound in scrap costs.

The Argus weekly Italian rebar and drawing-quality wire rod assessments remained at €570/t ($620/t) ex-works and €645/t delivered, respectively.

In Italy, rebar sales prices remained at €560-570/t ex-works, including extras for sizes, but mills announced offers at up to €600/t ex-works, referring to increasing scrap costs. Buyers were sceptical about the price increases as mills still needed to fill their April order books and there were no expectations for substantial increases in consumption. Buyers that needed to replenish stocks placed orders in late March, when there were signs that prices had bottomed out.

In the nearby markets, no fresh offers were reported. Rebar was quoted at €570-580/t fca late last week, when some Italian mills were eager for new sales. In particular, the tradeable value for rebar in Poland was reported at €615-620/t delivered this week, while in late March deals were concluded slightly below this. In the meantime, offers for Polish rebar stood at €625-630/t delivered to domestic buyers, while in nearby markets prices were pegged at €625-640/t delivered. Similar prices were available for overseas material from docks in the Baltic region.

In Germany, prices for small-to-medium purchases of rebar remained at €630-640/t delivered. Spanish rebar was still quoted at €615/t cfr to northwest Europe, with small discounts deemed available. But mills are likely to try and increase prices should they see demand.

In the Balkan region, Bulgarian rebar prices settled at 1,190-1,210 lev/t (€608-619/t) delivered late last week, while in Romania rebar was available at €630-640/t delivered.

But some customers showed more interest in overseas offers in late March. Rebar was mainly booked from Turkey, as prices were at $585-590/t fob, which would be below €600/t delivered in any region. Egyptian rebar was quoted at $580-590/t fob, but was available for later shipment.

Southern and northwestern European customers were booking Asian wire rod at $520/t fob in late March, which is estimated at no higher than $600/t cfr depending on the ports. Some buyers expressed concerns that the next "other countries" quota could be exhausted promptly again, as almost 83,771t were awaiting clearance in the first days of April. Turkish allocation was estimated to be filled promptly in this period too.

Trade restrictions supported stronger prices for wire rod in Europe, with mills announcing up to €20/t price increases. In particular, new offers for drawing quality material in the Italian market were indicated at €650/t delivered. In other markets, mills pushed up offers from €660/t delivered to up to €680/t delivered. Mesh quality wire rod in Germany and other nearby markets was available at €620-630/t delivered.

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

13/05/25

India’s Vedanta expands metals exploration

Mumbai, 13 May (Argus) — Indian private-sector mining firm Vedanta is exploring critical mineral assets in six states as it looks to strengthen its position in the fast-growing clean energy value chain. Vedanta is exploring for copper, nickel, cobalt, chromium, vanadium, tungsten and platinum-group elements (PGEs) in states such as Maharashtra, Rajasthan, Bihar, Arunachal Pradesh, Karnataka, and Chhattisgarh supported by India's policy push for mineral security , it said on 10 May. Vedanta secured four mineral blocks in the fourth round of India's critical mineral auctions. It won a vanadium and graphite block in Arunachal Pradesh and a cobalt, manganese, and iron (polymetallic) block in Karnataka. Its subsidiary Hindustan Zinc (HZL) was awarded one tungsten block in Andhra Pradesh and another in Tamil Nadu. The company is expanding its value-added aluminium products capacity in billets, primary foundry alloys, rolled products and wire rods. Aluminium billets are used in the aerospace, defence and solar power sectors, while aluminium rolled products are used in high-speed railways, electric vehicles, pharmaceuticals and battery enclosures. HZL is exploring uses for zinc beyond galvanizing steel to protect it from rust, which currently accounts for over 60pc of global zinc demand. It has entered the zinc alloy sector with a 30,000t plant and plans to significantly increase the share of value-added products in its aluminium portfolio to over 90pc in the near term. Vedanta's board earlier this year approved an investment of about $1.5bn to expand its aluminium capacity, including an expansion at its smelter in Orisha to increase production, as well as increased value-added product capacity at its flagship aluminium plants. By Deepika Singh Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Russia urges decision on Bolivia Li deal

12/05/25

Russia urges decision on Bolivia Li deal

Sao Paulo, 12 May (Argus) — The Russian ambassador to Bolivia today criticized what he described as Bolivian government stalling of a $970mn lithium concession deal with Russian-backed Uranium One Group. Dmitry Verchenko, in an interview with Bolivian state outlet Agencia Boliviana de Información, said the Bolivian congress is taking an "excessive" amount of time to reach a decision on the $970mn lithium concession deal signed in September 2024. The concession deal included the production of 14,000 metric tonnes (t)/yr of lithium carbonate equivalent (LCE) from the Uyuni salt flat — the largest lithium reserve in the world at 23mn t. Verchenko said that Uranium One, a subsidiary of state-owned atomic energy agency Rosatom, will build a pilot plant capable of producing 1,000t/yr LCE as soon as possible and follow up with gradual expansions. The project — which is still unnamed — will be the country's first direct lithium extraction (DLE) plant, a brine processing method that reduces LCE production time and water usage. Bolivian energy minister Alejandro Gallardo last month urged congress to approve both Russia's and China's CBC concession deals , but still no progress has been made. Congress in February said that it would only discuss the two deals after a nationwide round of public consultations that remains unscheduled. Political uncertainty delays Bolivia's Li hopes There is no forecast of when or if the concessions may be approved because Bolivia's congress is deeply divided between allies and political opponents of Luis Arce, the current president. Neither faction has the required majority for the bills to pass. The country will hold a presidential election in August and market participants expect a congressional vote on the matter may be pushed to next year because of uncertainty in the current polling ahead of the election. Russia looks further afield Verchenko added that Russian and Uranium One are waiting on the approval of the concession deal despite neighboring Argentina and Chile rapidly developing their lithium markets. Given the delay, Russia is already looking for alternative lithium solutions in Latin America with Brazil emerging as a potential partner . Following an in-person meeting with Russian president Vladimir Putin on 10 May, Brazilian president Luiz Inácio Lula da Silva confirmed that Brazil is actively seeking to collaborate with Russia to extract spodumene from the country's so-called Lithium Valley, a lithium-rich region located in the state of Minas Gerais. Bolivia's 2024 lithium carbonate output stood at 1,832t . By Pedro Consoli Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Tata UK lambasts importers' TRA submissions

12/05/25

Tata UK lambasts importers' TRA submissions

London, 12 May (Argus) — Claims by the International Steel Trade Association and importers in the Trade Remedies Authority's (TRA) safeguard review are "factually incorrect", Tata Steel UK has said Importers have stated — accurately — that Tata does not produce 2m-wide hot-rolled coil, or material with a tensile strength of over 500 megapascal, so these products should not be under the scope of the safeguard. In a rebuttal submission released by the TRA today, Tata said such specifications "constitute a small proportion of the overall market", and that current quotas are more than sufficient to provide import choice. Should these grades be excluded from the safeguard, Tata — which is effectively a re-roller until its electric arc furnace becomes operational — said importers could circumvent the safeguard, importing higher grades "at much lower prices" to compete with material produced and sold by Tata. Tata said wider coil is "often imported only to be slit into narrower cuts", meaning it is not fundamentally different from material it sells domestically. Some applications do require decoiled 2m-wide material, but Tata suggests this is a small proportion of the overall market. No end-users have raised concerns regarding supply of such material, Tata said, adding that sufficient tonnes could be imported from the EU or Turkey, origins with quotas that are "consistently underutilised quarter after quarter". Buyers just want such products to be excluded so they can "access significantly lower-priced imports", it said. Tata has requested quotas be amended in line with the demand reduction seen in recent years, and that caps are implemented on other countries' quota for hot-dip galvanised. Should a cap of 25pc be imposed, which is what the market anticipates, some traders said material currently on route to the UK could still be clearing in January 2026. The TRA is expected to release its initial findings this week. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Ford pauses production at Chicago plant

09/05/25

Ford pauses production at Chicago plant

Houston, 9 May (Argus) — Automaker Ford temporarily shut down production at its Chicago, Illinois, assembly plant following a supply chain disruption. The company said it moved a planned downtime week ahead of schedule and expects to resume production by 19 May. Congressman Frank Mrvan (D-Indiana) in a US House appropriations hearing on 7 May said the shutdown was due to a shortage of critical minerals needed to produce the company's braking systems. The company did not respond to the specific elements driving the shutdown. The plant manufactures the Ford Explorer, Police Interceptor Utility and Lincoln Aviator. By Jenna Baer Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Brazil's CSN expects flat steel, upside ahead

09/05/25

Brazil's CSN expects flat steel, upside ahead

Sao Paulo, 9 May (Argus) — Brazil's mining and steel firm CSN expects strong domestic demand to keep steel prices flat in 2025, with the potential for an uptrend in the coming months. Sales to the agricultural machinery and automotive industries should continue to trend upward , the company said. Civil construction sales have been solid and could tick up as the rainy season ends in Brazil. "Demand is good," executive director Luis Fernando Martinez said, adding that the firm will hold back price gains "to maintain profitability." The price of CSN's overall steel products increased by 5pc in the first quarter from a year earlier thanks to a 7pc increase in demand. Average steel prices hit a two-year high at R5,252 ($928)/metric tonne from R5,008/t a year earlier. Steel consumption has been climbing in Brazil and sales could have been stronger if not for growing competition from imports, the company said. Brazil's import penetration hit 27pc of the domestic market in the quarter, outstripping CSN's domestic market share. "I've never seen this in the [23 years] I've been in the company," Martinez said, calling the situation "unsustainable." Despite what he described as an inefficient tariff policy against imports, prices are expected to remain at current levels. Brazil implemented a 25pc tariff on 11 steel products from China in June 2024. The policy is set to expire by the end of May. Results Shipments reached 1.14mn t in the period, up 5pc from 1.08mn t a year earlier, driven by 8pc growth in domestic market sales. Slab production fell by 16pc to 812,000t because of a stoppage at the Rio de Janeiro-based Blast Furnace 2 in January. The company expects the asset to remain under maintenance for at least three more months. CSN produced 775,000t of flat-rolled steel in the quarter, 11pc less than a year prior. Long steel output increased by 12pc to 58,000t from a year earlier. The company registered a R732mn loss in the first quarter, 53pc higher than the R480mn loss a year before. By Isabel Filgueiras Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more