Brightmark to build Georgia pyrolysis plant
Chemical recycler Brightmark plans to build a 400,00t/yr pyrolysis plant in Thomaston, Georgia, two years after the company terminated its plan to build a similar plant in a nearby Georgia community.
Pyrolysis is a form of chemical recycling that breaks down used plastic into pyrolysis oil, which can then be reprocessed into new plastics at virgin polymers facilities.
The 2.5mn ft² plant will cost $950mn, including infrastructure such as roads and rail access, Brightmark said.
A previous plan to build a chemical recycling facility in Macon, Georgia, ended in 2022 after Mayor Lester Miller withdrew his support, citing "long-term safety concerns" from Brightmark's "unproven process".
The company finished construction of its first chemical recycling plant in Ashley, Indiana, in 2022. Brightmark said it has recycled 2,000t of plastic waste so far at its Indiana plant, well behind its anticipated volume of 100,000 t/yr.
Related news posts
US Gulf polymer plants restarting following hurricane
US Gulf polymer plants restarting following hurricane
Houston, 12 July (Argus) — Some US Gulf Coast polymer plants and rail lines are resuming operations following shutdowns as a result of Hurricane Beryl earlier in the week. Multiple polyethylene (PE) and polypropylene (PP) units shut down pre-emptively before the storm, which came ashore in Matagorda, Texas, on 8 July, and many are still in the process of restarting. Formosa Plastics had pre-emptively shut down operations at its Point Comfort, Texas, site, but did not receive any major damage from Hurricane Beryl. The site, including approximately 1.8mn t/yr of PE and 917,000 t/yr of PP production, is in the process of resuming operations with the end of next week as the target date for a complete return, the company said in a statement. The status of multiple other PE and PP units in the region was not immediately available. Companies including Dow, Ineos, Braskem America, and LyondellBasell, which all had some units shut down during the storm, did not immediately respond to requests for operational updates. In addition to plant outages, polymer producers had been experiencing transportation issues earlier in the week due to flooding, but the repair of Union Pacific's lines in the Galveston area yesterday has allowed rail operations to resume, according to a statement from the company. It will take several days to work through the remaining train congestion, and widespread power outages will likely continue to cause delays throughout the impacted area. By Cole Sullivan Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
China's Wanhua starts up polyolefin elastomer unit
China's Wanhua starts up polyolefin elastomer unit
Shanghai, 12 July (Argus) — Chinese producer Wanhua Chemical has started up its new 200,000 t/yr polyolefin elastomer (POE) unit on 29 June, with its first batch of POE loaded and dispatched on 10 July. This is China's second POE unit after Hainan Beiouyi's 30,000 t/yr unit, which started operations in December 2023. The POE produced by domestic producers uses ethylene and 1-butene as feedstock, as the mass production of feedstock 1-octene has not yet been achieved in China. Wanhua Chemical has started building the second phase of the POE project, with a production capacity of 400,000 t/yr, at Penglai, Shandong province. It is expected to start operations by the end of 2025, bringing the company's total POE capacity to 600,000 t/yr. Wanhua Chemical is a state-owned company in Shandong, with businesses covering polyurethane, petrochemicals and fine chemicals, among others. Wanhua Chemical owns and operates a 450,000 t/yr high-density/linear low-density polyethylene (HD/LLDPE) unit, a 350,000 t/yr HDPE unit, and a 300,000 t/yr polypropylene unit. China's new POE production capacities t/yr Company Location Capacity (t/yr) Start-up date Wanhua Chemical Yantai Shandong 200,000 29-Jun-24 Wanhua Chemical Yantai Shandong 400,000 End 2025 Lianyungang Petrochemical (Zhejiang Satellite) Lianyungang Jiangsu 100,000 2025 Sinopec Maoming Petrochemical Maoming Guangdong 50,000 2025 Shandong Jingbo Petrochemical Binzhou Shandong 100,000 2025 Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Lummus, MOL to build Hungary pyrolysis plant
Lummus, MOL to build Hungary pyrolysis plant
London, 11 July (Argus) — Technology licenser Lummus and Hungarian oil firm Mol have started construction designs for a pyrolysis chemical recycling plant at Mol's site in Tiszaujvaro, Hungary. It will have a processing capacity of 40,000 t/yr of mixed plastic waste. The plant will produce pyrolysis oil for the Mol petrochemicals facility at the same location, which has a capacity of 660,000 t/yr for ethylene and 335,000 t/yr for polymer-grade propylene. Mol and Lummus signed an agreement to integrate pyrolysis chemical recycling at its refining and petrochemical sites in Slovakia and Hungary in 2023 . Mol indicated at the time it aimed for production capacities of more than 100,000 t/yr of recycled plastic by 2030. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Inovyn mothball two of four lines at Newton Aycliffe
Inovyn mothball two of four lines at Newton Aycliffe
London, 11 July (Argus) — PVC producer Inovyn has mothballed two of four production lines at its Newton Aycliffe site in Durham, England. A company source said that the two largest lines at the site are still operating. The plant can produce 280,000 t/yr of suspension PVC (s-PVC). Market sources confirmed the closure to Argus . The PVC market in Europe is currently affected by low demand with weak construction figures in a lengthy market. The Aycliffe site manufactures dry blend, rigid, flexible and medical grades of PVC. The site is not fully integrated and imports vinyl chloride monomer (VCM) from another Inovyn site in Rafnes, Norway. The smaller lines impacted mainly produce non-standard s-PVC grades. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
![](/_next/image?url=%2F-%2Fmedia%2Fproject%2Fargusmedia%2Fmainsite%2Fimages%2F14-generic-hero-banners%2Fherobanner_1600x530_generic-c.jpg%3Fh%3D530%26iar%3D0%26w%3D1600%26rev%3D-1%26hash%3DFC2BEDE406483FEF5FDB9549159BAC11&w=3840&q=75)
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more