Generic Hero BannerGeneric Hero Banner
Latest Market News

Housing construction falls in Sept, PVC demand mixed

  • Spanish Market: Petrochemicals
  • 18/10/24

Housing permits and starts fell in September according to the latest figures from the US Census Bureau due to volatility in multi-family construction, but single-family construction has grown more steadily throughout the peak building season.

Permits for privately-owned homes were at a seasonally adjusted annual rate of 1.428mn units in September, according to the US Census Bureau and the US Department of Housing and Urban Development (HUD). That is 2.9pc below the revised August rate of 1.47mn units and 5.7pc below the September 2023 rate.

Housing starts were at a rate of 1.354mn units in September, 0.5pc below the revised August rate of 1.361mn units and 0.7pc below September 2023.

Permits have risen and fallen every other month since April of this year. During that time permits for buildings of five or more units trended in the exact same way: rising in one month only to fall the very next.

Housing starts have followed a similar track as well, only the month-to-month volatility has endured for the entire year. Once again, multi-family housing units have driven the inconsistency. More recently, multi-family homes have declined for two straight months.

Single-family construction

Stripping away the multi-family construction figures reveals that single-family construction has not only been more stable but has been growing consistently in recent months. That growth has been limited in some instances and any rebound has still been evidence of a construction market restrained by weaker buying sentiment fueled by high home prices as well as higher borrowing costs.

Single-family housing permits were at a rate of 970,000 units in September, 0.3pc higher than August's revised rate. That is the highest rate in five months and the fourth-straight month of growth. Permits had fallen each month from January to June, though, and permits in September 2024 were still down 1.2pc compared with the prior year.

Housing starts for single-family units were at a rate of 1.027mn units in September, 2.7pc higher than August and 5.5pc higher than the previous year. Housing starts have only grown for three consecutive months, reflecting the delayed impact of permitting on actual housing construction.

The year-to-year comparisons reflect a housing construction market that is recovering from a weak 2023. But softer permit numbers compared with last year still indicate some hesitation in future demand expectations and the likelihood of a continued gradual and uneven recovery into next year.

Builder confidence rose to 43 points in October compared with 41 in September, according to the National Association of Home Builders (NAHB)/Wells Fargo Housing Market Index (HMI) released on 17 October. That reflects some improving sentiment despite affordability concerns in the market, but any mark below 50 points is still indicative of a weak market.

PVC demand varies by end use

The housing market picture has been mixed for polyvinyl chloride (PVC) all year. Demand peaked for some buyers and converters back in May or June, with demand only slowly declining since. But some end use segments like pipe or exterior profiles have reported stable and solid demand even into October.

Pipe production has been buoyed by public investments in infrastructure, such as spending to replace lead pipes used in the US' water infrastructure as part of a recent finalization of an Environmental Protection Agency (EPA) rule requiring all lead pipes be replaced within 10 years.

But for exterior profiles, which covers siding, windows, and doors, the market has also been fairly strong as of late. Resin suppliers to these customers have reported strong ordering patterns, seemingly without concern about inventory buildup before the end of the year.

Stronger single-family construction activity, which would use more siding for example, combined with recent storms in the Southeast US requiring home rebuilding and repair could explain some of this better demand sentiment compared to other PVC end uses.

However, PVC contract pricing has been under pressure due to larger PVC inventories among producers and competition for market share. Argus assessed September PVC contracts as stable from the previous month at 59.5¢/lb, but some customers reported getting modest price decreases in limited instances.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

09/05/25

EU consults on tariffs for €95bn US imports

EU consults on tariffs for €95bn US imports

Brussels, 9 May (Argus) — The European Commission is consulting on an extensive list, worth €95bn ($107bn), of US industrial, agricultural and other imports that could be subject to tariff countermeasures. The long list includes extends from livestock, biofuels, wood pellets to metals, aircraft, tankers and polymers . The consultation runs until midday on 10 June. It is aimed at stakeholders affected by US measures and possible EU rebalancing measures. Also considered for possible countermeasures are restrictions, worth €4.4bn, on EU exports to the US of steel, iron and aluminium scrap, as well as toluidines, alcoholic solutions and enzymes (CN codes 7204, 7602, 292143, 330210 and 350790). The commission linked the possible new measures to US universal tariffs and to Washington's specific tariffs on cars and car parts. The commission said the public consultation is a necessary procedural step. It does not automatically result in countermeasures. The EU also launched a WTO dispute procedure against the US for Washington's universal tariffs, set at 20pc for EU goods and currently paused at 10pc, and at 25pc on all imports of vehicles and car parts. The commission will need approval by EU governments under a simplified legislative procedure. Officials say this will complete a legal act for the countermeasures, making them "ready to use" if talks with the US do not produce a "satisfactory" result. The list of products potentially targeted includes livestock, along with items ranging from spectacles to antiques. The 218-page list includes a range of agricultural and food products including oats, maize, and cereal pellets. Also included are biodiesel and wood pellets (CN codes 38260010, 44013100), as well as paper and cotton products. Aluminium, iron, steel are listed together with a wide range of other goods from gas turbines, ships propellers and blades, aircraft, sea-going tankers and other vessels. Polymers, copolymers, polyesters and other products are not spared (CN codes 39039090 and more). On 10 April, the EU paused its reciprocal tariffs against the US for 90 days, responding to a US pause. The EU notes that €379bn, or 70pc, of the bloc's exports to the US are currently subject to new or paused tariffs. By Dafydd ab Iago Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Chemicals, polymers part of EU tariff consultation


08/05/25
08/05/25

Chemicals, polymers part of EU tariff consultation

London, 8 May (Argus) — Polymer and chemical products are included in a European Commission public consultation on a list of US imports which could become subject to EU countermeasures, if ongoing EU-US negotiations do not result in a mutually beneficial outcome and the removal of the US tariffs. The consultation will remain open until 10 June, after which a final proposal will be made for the adoption of countermeasures and a legal act prepared for imposing them "in case negotiations with the US do not produce a satisfactory result". The list of additional products that could face import tariffs includes many polymers and some chemicals, although appears to target value more than volume. These additions include polypropylene homopolymer and copolymers (HS codes 39021000, 39023000), although these account for a relatively small volume of trade, at 114,000t in 2024, according to GTT data. Other polymer codes on the consultation list include some polystyrene, polyvinyl chloride, acrylonitrile butadiene styrene and polyethylene terephthalate products. Isocyanates and some polyurethanes are part of the consultation. Imports of acetic acid, a methanol derivative were included. EU 27 imports from the US in 2024 were 540,000t. Liquid caustic soda has been included. The EU 27 countries imported 540,000t in 2024. Benzene and xylenes have been included, but only under distinct "non-chemically defined" HS codes (27071000 and 27073000) and for which volumes are small. The European Union on 9 April announced a 90-day delay to a series of planned countermeasures specific to US tariffs on metals to allow space for negotiations. These are separate from the new consultation and remain poised to go ahead if negotiations fail. They included a 25pc tariff on imports from the US of polyethylene under codes representing nearly 1mnt of imports in 2024. By Alex Sands Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Shell to buy Freepoint pyrolysis oil in US: Update


08/05/25
08/05/25

Shell to buy Freepoint pyrolysis oil in US: Update

Adds Freepoint comment in second paragraph Houston, 8 May (Argus) — Freepoint Eco-Systems has agreed to provide Shell's polymer plant in Pennsylvania with "a steady supply" of pyrolysis oil produced in Hebron, Ohio, from chemically recycled plastic waste. Under the "landmark agreement", oil will be shipped to Shell's polymer plant in Monaca, Pennsylvania, where it will be used to make plastic, the company said. Shell under the deal is entitled to the Hebron plant's production capacity of 130mn lb/yr, Freepoint said Thursday. Freepoint's Hebron plant is still in its commissioning phase, but the company expects to produce up to its full capacity of pyrolysis oil upon completion later this year. Pyrolysis uses high heat to break down waste plastic into feedstocks that can be used to make virgin-like plastic material. Shell said the agreement reflected its commitment to increasing the circularity of plastics in its portfolio. On 22 April, Freepoint sent its first railcar of pyrolysis oil to Shell's plant in Norco, Louisiana. By Zach Kluver Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Shell to buy Freepoint pyrolysis oil for Penn. plant


08/05/25
08/05/25

Shell to buy Freepoint pyrolysis oil for Penn. plant

Houston, 8 May (Argus) — Freepoint Eco-Systems has agreed to provide Shell's polymer plant in Pennsylvania with "a steady supply" of pyrolysis oil produced in Hebron, Ohio, from chemically recycled plastic waste. Under the "landmark agreement", oil will be shipped to Shell's polymer plant in Monaca, Pennsylvania, where it will be used to make plastic, the company said Monday. Shell did not disclose how much supply it agreed to take or for how long. Freepoint's Hebron plant is still in its commissioning phase, but the company expects to produce up to 130mn lb/yr of pyrolysis oil upon completion later this year. Pyrolysis uses high heat to break down waste plastic into feedstocks that can be used to make virgin-like plastic material. Shell said the agreement reflected its commitment to increasing the circularity of plastics in its portfolio. On 22 April, Freepoint sent its first railcar of pyrolysis oil to Shell's plant in Norco, Louisiana. By Zach Kluver Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

India, Saudi Arabia plan two Indian refineries


07/05/25
07/05/25

India, Saudi Arabia plan two Indian refineries

Mumbai, 7 May (Argus) — India and Saudi Arabia are to collaborate on the development of two integrated refinery and petrochemical plants in India. The plan was announced after Indian prime minister Narendra Modi met Saudi counterpart Mohammed bin Salman in Jeddah on 22 April, as part of the India–Saudi Arabia Strategic Partnership Council. Saudi Arabia in 2019 pledged to invest $100bn in India in several sectors including energy and petrochemicals. No further details have been provided but the projects could be Indian state-run BPCL's planned facility in Andhra Pradesh and oil firm ONGC's refinery project in Gujarat, according to industry participants. Plans for a 1.2mn b/d refinery in Ratnagiri alongside the UAE's Adnoc have been abandoned because of logistical and land acquisition challenges, industry participants say. Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more