Generic Hero BannerGeneric Hero Banner
Latest Market News

EU quotas, weak prices impact trade flows

  • Spanish Market: Metals
  • 15/11/19

Drops in steel prices and quota exhaustion changed the trade flows for certain products in and out of the EU in September, Eurofer data show.

Wire rod

Exports of wire rod to Algeria were down to 2,050t in September from 16,869t in August — and from 4,975t in September 2018 — as the country tried to reduce its dependence on steel imports. Algeria Qatari Steel said that the steelmaker received its second Supramax of DRI pellets and plans to bring one of two new EAFs online during the next week. The steelmaker plans to increase capacity of wire rod and rebar to 4mn t/yr.

EU wire rod exports to Israel were also up to 32,246t from 16,777t on the month and 7,158t from the same month last year. Israel's long steel demand is one of the factors supporting Turkish rebar prices, although it seems that the EU is also targeting the country as a market for longs.

In terms of imports into the EU, Belarus seems to be taking the biggest advantage of the EU quota system,although it is also at risk of running down its remaining allocation well before the renewal period on 1 July 2020. It currently has 127,551t remaining and 424t awaiting allocation of the initial 250,620t allocated on 1 July 2019.

Rebar

Belarus seems to be adopting a similar strategy for rebar as it has ramped up exports to the EU since the quota opened, sending 57,473t in July, 30,522t in August and 25,845t in September. Although exports to the EU have dropped slightly, the country is still taking advantage of Turkey's inability to sell to the EU after exhausting its quota. Belarus now sells rebar under the "other countries" quota. Currently, just 98,108t remains on this quota with 700t awaiting allocation. Unlike the individual country quotas, however, this quota renews each quarter, with the next renewal scheduled for 1 January 2020.

The EU sent more rebar to Ethiopia in September, with 5,337t of exports recorded compared with 3,707t for the whole of 2018 and 6,063t for the whole of 2017. Turkey is a regular seller of rebar to the Ethiopian market and this ramping up of exports by the EU could jeopardise Turkey's foothold there, depending on the price levels EU mills can offer. The Turkey rebar price is climbing, with the Argus daily assessment reaching $422.50/t fob today, up $25.50/t since the end of September. Turkey remains Ethiopia's largest rebar seller, with 241,438t sent in the January-August this year.

Hot-rolled coil (HRC)

Egyptian HRC exports to the EU are up significantly in September to 23,558t from 4,800t in August and 3,937t in September 2018. But the trade balance is shifting as EU exports to Egypt are declining — 6.519t in September from 8,456t in August.

The EU's HRC exports to Malysia are also down to 3,057t in September from 7,299t in August and 9,393t in September 2018.

One of the largest HRC exporters into the EU was India, which ramped up sales in September to 116,604t compared with just 4,447t in August. But sales are still down to 631,178t in the first nine months of 2019 from 737,366t in the third quarter of last year.

Turkey's sales of HRC to the EU have fluctuated this year, but in September they totalled 225,430t as producers tried to offset their inability to sell rebar into the EU. Turkish HRC exports to the EU are up on the year to 225,430t in September from 206,428t last year. With 2.3mn t in exports to the EU in the year-to-date period, Turkey looks set to match the 2.9mn t of HRC sent in 2018, maybe even outpacing this as Turkish HRC prices climb. The Argus weekly Turkey HRC assessment stands at $415/t fob today after a dip to $395/t fob on 25 October. There are also fewer quota restrictions on HRC, with just one large quota for all countries that is renewed each quarter.

Cold-rolled coil (CRC)

Ghana's consumption of CRC from the EU is up significantly for September to 3,896t — more than the volume exported in any full year, with the exception of 2013 when 5,200t was shipped over the year.

Consumption of EU CRC is down for both Mexico and the US for the nine-month period. Mexico imported only 76,453t from the EU compared with 102,034t in the first nine months of 2018. Similarly, the US imported just 172,744t in the first three quarters, down from 264,468t in the same period last year. The automotive sector has experienced a prolonged slowdown over the past few years and US steel prices have dropped. The Argus weekly US Midwest domestic steel HRC assessment stood at $900/t ex-works on 7 August 2018, but has since lost much of its value to reach $530.75/t ex-works today.

Elsewhere in the Americas, weakness is also seen in Brazil, where CRC exports to the EU are typically relatively strong. But Brazil exported just 830t of CRC in September, down from 4,855t on the year. For the nine-month period it has so far sent just 166,224t, compared with 240,561t during the same period last year.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

06/05/25

Trump unlikely to lift tariffs on Canada

Trump unlikely to lift tariffs on Canada

Washington, 6 May (Argus) — President Donald Trump suggested today he would not lift tariffs on imports from Canada and told Canadian prime minister Mark Carney that the US-Canada-Mexico (USMCA) free trade agreement needs to be renegotiated. Trump, who hosted Carney at the White House today, told reporters that there was nothing Canada's leader could tell him to change his mind on stiff tariffs he imposed on Canadian steel, aluminum, cars and auto parts. "It's just the way it is," Trump said. While Trump has altered his tariff levels repeatedly, his administration has imposed a 25pc tariff on Canada-sourced steel and aluminum, and a 25pc tariff on some cars and autoparts imported from Canada. Any product that qualifies for duty-free treatment under the USMCA is exempt from tariffs Trump imposed. The 10pc tariff Trump imposed on Canadian crude and other energy imports only lasted from 4-7 March, causing turmoil in North American energy markets. But even the remaining tariffs are a significant hindrance for the integrated North American auto industry, executives in Canada and the US have said. Trump today described the USMCA, which he negotiated during his first administration, as merely a "transitional deal" and suggested that it could be either terminated or renegotiated completely. The USMCA includes a provision calling for it to be reviewed by all three countries in 2026. The existing free trade agreement is "a basis for broader negotiations," Carney said, adding that "some things about it are going to have to change." Carney made his first trip to Washington just a week after winning the 28 April parliamentary election, following a campaign centered around his opposition to Trump's policies. Trump and Carney offered polite compliments to each other, but there was little visible chemistry between the two men. Trump doubled down on his suggestion that Canada could become the 51st US state, prompting Carney to tell him that "as you know from real estate, there are some places that are never for sale." "Having met with the owners of Canada over the course of the campaign in the last several months, it's not for sale," Carney said. "Never say never", Trump retorted. Trump also repeated his past claims that "we don't do much business with Canada. From our standpoint, they do a lot of business with us." "We are the largest client of the United States," said Carney. "We have a tremendous auto sector between the two of us." By Haik Gugarats Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

US vehicle sales slip in April from 4-year high


05/05/25
05/05/25

US vehicle sales slip in April from 4-year high

Houston, 5 May (Argus) — Domestic sales of light vehicles in April slipped from a four-year high the prior month but still reflected robust purchasing ahead of planned implementation of more US tariffs on the automotive industry. Sales of light vehicles — trucks and cars — dipped to a seasonally adjusted rate of 17.3mn units in April, down from 17.8mn in March, the Bureau of Economic Analysis reported today. Last month's total still was above April 2024's annualized rate of 16mn and was the second-highest monthly reading since April 2021. US consumers maintained steady purchasing last month in a rush to beat 25pc tariffs on imports of vehicle parts that were set to be implemented on 3 May. Those higher duties are expected to raise input costs for domestic automakers, and thus, prices for buyers. US president Donald Trump early last week signed an order that allows vehicle manufacturers to partially recoup tariff-related costs, helping to ease the burden. Still, Trump maintained his goal of forcing US automakers to become wholly reliant on auto parts made in the US. Trump already instituted 25pc tariffs on imports of foreign-made vehicles on 3 April. Tariff-related pressures have dented US consumer sentiment and weighed on domestic manufacturing activity, but certain pockets of the economy have shown resilience such as the services industry and employment. Truck sales last month fell by 1.9pc sequentially to 14.4mn unit rate, while car sales dropped by 8.8pc to a 2.9mn unit rate. Domestic vehicle production fell to a seasonally adjusted annual rate of 10.07mn from an upwardly revised 10.09mn in February, according to US Federal Reserve data. That compares with 11.08mn in March 2024. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Ford expects $1.5bn tariff hit in 2025


05/05/25
05/05/25

Ford expects $1.5bn tariff hit in 2025

Pittsburgh, 5 May (Argus) — Ford expects tariffs to cost the US automaker about $1.5bn in profit this year, causing the firm to withdraw its full-year financial guidance today. Tariffs and the uncertain rollout of potential changes to those tariff caused the Dearborn, Michigan-based company to suspend its 2025 guidance, which was initially projected at $7bn-8.5bn in earnings before interest and taxes. US president Donald Trump has place 25pc import taxes on vehicles, steel and aluminum, placing immense pressure on US automakers, many of whom have operations in Mexico and Canada. Ford is the third major US automaker to rescind its financial guidance in the past week following similar decisions by Stellantis and General Motors . By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Mexico's manufacturing contraction deepens in April


05/05/25
05/05/25

Mexico's manufacturing contraction deepens in April

Mexico City, 5 May (Argus) — Activity in Mexico's manufacturing sector shrank for a 13th straight month in April, with declines accelerating in production and new orders, according to a survey of purchasing managers. The manufacturing purchasing managers' index (PMI) fell to 45.5 in April from 46.9 in March, finance executives' association IMEF said, moving further below the 50-point threshold that separates growth from contraction. US tariffs imposed since March are adding pressure to Mexico's manufacturing sector, which makes up about a fifth of the national economy. The auto industry, responsible for roughly 18pc of manufacturing GDP, may be the hardest hit by the new measures, including a 25pc tariff on auto parts that took effect 3 May. Mexico remains the top exporter of vehicles to the US, supplying 23pc of all US auto imports in 2024. But IMEF said tariffs compound broader, mostly domestic headwinds, including reduced public spending and investor uncertainty stemming from sweeping legal and regulatory reforms. New investment has stalled since late 2024. The PMI index for new orders fell by 2.5 points to 41.8, the lowest since June 2020. Production dropped by 2.5 points to 43.6, while employment fell by 0.6 point to 46.4. New orders and production have now been in contraction for 14 straight months, and employment for 15. Inventories saw the steepest drop in April, falling 4 points to 46.3 — sliding from expansion to contraction — as manufacturers accelerated shipments after tariff implementation dates were confirmed. IMEF's non-manufacturing PMI — which covers services and commerce — remained in contraction for a fifth consecutive month but edged up by 0.5 points to 49.0 in April. Within that index, new orders rose by 0.6 points to 48.1, employment increased 1.3 points to 48.6 and production held steady at 47.5. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Australia's Labor win may aid low-carbon Fe, Al sectors


05/05/25
05/05/25

Australia's Labor win may aid low-carbon Fe, Al sectors

Sydney, 5 May (Argus) — The Australian Labor party's victory in the country's 3 May parliamentary election could support low-carbon iron and aluminium developers, providing policy clarity and public capital to the sectors. Labor's victory provides more certainty around Australia's A$14bn ($9.06bn) green hydrogen subsidy scheme, which will help steel producers transition towards hydrogen-powered steel furnaces. The opposition Coalition during the election pledged to scrap the programme, which will allow producers to claim A$2/t of green hydrogen produced from 2027. Australian steelmaker NeoSmelt and South Korean steelmaker Posco are developing electric iron smelters in Western Australia (WA) that produce hot-briquetted iron, which is used in the green steel process. Both projects will initially rely on natural gas but may transition to hydrogen-based processing as hydrogen production rises. Australia's hydrogen tax credits may prove crucial given ongoing hydrogen production challenges. South Australia's state government closed its Office of Hydrogen Power SA on 2 May, following a funding cut earlier this year. Labor can now also move forward with plans for A$2bn in low-emissions aluminium production credits, beginning in 2028-29. Smelters will be able to claim credits per tonne of low-carbon aluminium produced, based on their Scope 2 emission reductions. The party's proposal does not include any blanket credit for producers. Labor's aluminium production credits are aimed at supporting the Australian government's goal of doubling the country's share of renewable power from about 40pc to 82pc by 2030. Australian producers export about 1.5mn t/yr of aluminium, according to industry body Australian Aluminium Council, from four smelters located around the country. Green iron funding Labor's election win also secures its A$1bn lower-emission iron support pledge , first announced in late February. Half of the fund will go towards restarting and transitioning the 1.2mn t/yr Whyalla steelworks in South Australia into a green steel plant. The other half will support new and existing green iron and steel projects to overcome initial funding barriers. Labor has not allocated any funding through the programme yet. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more