Latest market news

EU quotas, weak prices impact trade flows

  • : Metals
  • 19/11/15

Drops in steel prices and quota exhaustion changed the trade flows for certain products in and out of the EU in September, Eurofer data show.

Wire rod

Exports of wire rod to Algeria were down to 2,050t in September from 16,869t in August — and from 4,975t in September 2018 — as the country tried to reduce its dependence on steel imports. Algeria Qatari Steel said that the steelmaker received its second Supramax of DRI pellets and plans to bring one of two new EAFs online during the next week. The steelmaker plans to increase capacity of wire rod and rebar to 4mn t/yr.

EU wire rod exports to Israel were also up to 32,246t from 16,777t on the month and 7,158t from the same month last year. Israel's long steel demand is one of the factors supporting Turkish rebar prices, although it seems that the EU is also targeting the country as a market for longs.

In terms of imports into the EU, Belarus seems to be taking the biggest advantage of the EU quota system,although it is also at risk of running down its remaining allocation well before the renewal period on 1 July 2020. It currently has 127,551t remaining and 424t awaiting allocation of the initial 250,620t allocated on 1 July 2019.

Rebar

Belarus seems to be adopting a similar strategy for rebar as it has ramped up exports to the EU since the quota opened, sending 57,473t in July, 30,522t in August and 25,845t in September. Although exports to the EU have dropped slightly, the country is still taking advantage of Turkey's inability to sell to the EU after exhausting its quota. Belarus now sells rebar under the "other countries" quota. Currently, just 98,108t remains on this quota with 700t awaiting allocation. Unlike the individual country quotas, however, this quota renews each quarter, with the next renewal scheduled for 1 January 2020.

The EU sent more rebar to Ethiopia in September, with 5,337t of exports recorded compared with 3,707t for the whole of 2018 and 6,063t for the whole of 2017. Turkey is a regular seller of rebar to the Ethiopian market and this ramping up of exports by the EU could jeopardise Turkey's foothold there, depending on the price levels EU mills can offer. The Turkey rebar price is climbing, with the Argus daily assessment reaching $422.50/t fob today, up $25.50/t since the end of September. Turkey remains Ethiopia's largest rebar seller, with 241,438t sent in the January-August this year.

Hot-rolled coil (HRC)

Egyptian HRC exports to the EU are up significantly in September to 23,558t from 4,800t in August and 3,937t in September 2018. But the trade balance is shifting as EU exports to Egypt are declining — 6.519t in September from 8,456t in August.

The EU's HRC exports to Malysia are also down to 3,057t in September from 7,299t in August and 9,393t in September 2018.

One of the largest HRC exporters into the EU was India, which ramped up sales in September to 116,604t compared with just 4,447t in August. But sales are still down to 631,178t in the first nine months of 2019 from 737,366t in the third quarter of last year.

Turkey's sales of HRC to the EU have fluctuated this year, but in September they totalled 225,430t as producers tried to offset their inability to sell rebar into the EU. Turkish HRC exports to the EU are up on the year to 225,430t in September from 206,428t last year. With 2.3mn t in exports to the EU in the year-to-date period, Turkey looks set to match the 2.9mn t of HRC sent in 2018, maybe even outpacing this as Turkish HRC prices climb. The Argus weekly Turkey HRC assessment stands at $415/t fob today after a dip to $395/t fob on 25 October. There are also fewer quota restrictions on HRC, with just one large quota for all countries that is renewed each quarter.

Cold-rolled coil (CRC)

Ghana's consumption of CRC from the EU is up significantly for September to 3,896t — more than the volume exported in any full year, with the exception of 2013 when 5,200t was shipped over the year.

Consumption of EU CRC is down for both Mexico and the US for the nine-month period. Mexico imported only 76,453t from the EU compared with 102,034t in the first nine months of 2018. Similarly, the US imported just 172,744t in the first three quarters, down from 264,468t in the same period last year. The automotive sector has experienced a prolonged slowdown over the past few years and US steel prices have dropped. The Argus weekly US Midwest domestic steel HRC assessment stood at $900/t ex-works on 7 August 2018, but has since lost much of its value to reach $530.75/t ex-works today.

Elsewhere in the Americas, weakness is also seen in Brazil, where CRC exports to the EU are typically relatively strong. But Brazil exported just 830t of CRC in September, down from 4,855t on the year. For the nine-month period it has so far sent just 166,224t, compared with 240,561t during the same period last year.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/11/21

US alleges Nippon dumped HRC at higher rates

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Recent deep-sea and short-sea cfr Turkey scrap deals


24/11/21
24/11/21

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output drops further in October


24/11/21
24/11/21

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ArcelorMittal could close two service centres in France


24/11/20
24/11/20

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Graphjet launches Malaysian biomass-to-graphite plant


24/11/20
24/11/20

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more