Industria automotriz impulsaría nearshoring en México

Spanish Market: Metals, Oil products
26/02/24

Los fabricantes de automóviles ayudarán a determinar el alcance de las inversiones del nearshoring en México a medida que el impacto de este fenómeno sea más claro a lo largo de 2024.

México ha visto casi $60 mil millones en planes de inversión relacionados con el nearshoring en tan solo 10 proyectos anunciados en los últimos 12 meses.

Si bien el alcance del desarrollo del nearshoring en México dependerá en gran medida de políticas generales este año, la atención ya se centra en los grandes proyectos de fabricantes de automóviles como Nissan de Japón, Kia de Corea del Sur y en los de un floreciente sector integrado por 13 fabricantes más pequeños de origen chino, como Chirey, MG, BYD, Geely, Omoda, Jetour, entre otros.

La industria nacional de autopartes (INA) estima que México podría atraer hasta $44 mil millones de inversión en autopartes y proveedores automotrices a través del nearshoring en los próximos años. La reubicación o expansión de las cadenas de producción a México para estar más cerca de Estados Unidos atrae inversiones en toda la industria, dijo recientemente el presidente del INA, Francisco González.

Teniendo en cuenta que el gobierno estima que México ya ha recibido $110 mil millones del nearshoring desde que comenzó el fenómeno, la asociación ha estimado que alrededor de 40pc de eso está relacionado con el sector automotriz.

Nuevo León favorecido

Solo el estado de Nuevo León, en la frontera norte de Texas, podría recibir $23 mil millones en los próximos años, en gran parte debido a la construcción de una gigafábrica planificada por el fabricante de vehículos eléctricos Tesla fuera de la ciudad Monterrey.

Además de la inversión estimada de aproximadamente $5 mil millones de Tesla, esto atraería a una serie de fabricantes de equipos originales y otros proveedores de piezas y servicio, lo que podría llevar la inversión total hasta $15 mil millones.

Sin embargo, la gigafábrica de Tesla que se construiría en Santa Catarina, en los suburbios de Monterrey, tendrá el visto bueno hasta que la planta de la misma empresa en Austin, Texas, haya completado el desarrollo de un modelo de construcción de menor costo para 2025.

Pero esto no ha impedido que un gran número de fabricantes de equipos originales y otros integrantes de la cadena de suministro estén empezando a planificar la construcción de nuevas instalaciones cerca del sitio de la gigafábrica para estar listos cuando Tesla construya su planta.

Entre ellos, está AGP eGlass que dijo que planea gastar $800 millones en la construcción de una planta de vidrio automotriz de alta tecnología para suministrar a fabricantes como Tesla.

De los 278 proyectos automotrices registrados en 2023, un total de 54 se encuentran en Nuevo León, que lo sitúa en segundo lugar nacional, solo por debajo de Coahuila con 56 proyectos en total, y por encima de Guanajuato con 49 y Querétaro con 28.

Y de las 54 inversiones registradas en Nuevo León, 23 están enfocadas en la movilidad eléctrica.

Esto convierte a Nuevo León en la entidad que atrajo más proyectos de electromovilidad en 2023, por encima de Coahuila, con 19 proyectos y Guanajuato, que registró 13 proyectos de este tipo.

En cuanto a la generación de empleos que se anticipa como resultado del nearshoring, el gobierno de Nuevo Leon afirma que ya ha generado más de 42,000 puestos de trabajo directamente relacionados con el sector automovilístico.

By James Young

Inversiones anunciadas de nearshoring para México				$mn
Compañía	Tipo de proyecto	Inversión	Ubicación	Anuncio
Tesla**	Fabricación de autos eléctricos	15,000	Nuevo León	28 Feb 23
Kia	Unidad de producción	3,000	Nuevo León	15 May 23
Volkswagen	Fabricación de autos eléctricos	942	Puebla	16 Feb 24
BMW	Ensamblaje autos eléctricos	865	San Luis Potosí	23 Feb 23
AGP Glass	Proveedor Tesla	800	Nuevo León	27 Sep 22
Volkswagen	Automotriz / cadena suministro	764	Puebla	27 Oct 22
Nissan	Planta de ensamblado	700	Aguascalientes	24 Dic 23
Ningbuo Tuopo Group (NTG)	Ensamblaje automotriz	700	Nuevo León	28 Oct 23
ELAM-FAW	Autopartes	407	Colima	30 Ene 24
Unison Shanghai	Componente de autos y partes de aluminio	400	San Luis Potosí	18 Ene 24
Empresas automotrices, Análisis Económico Banorte

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

26/12/24

China's GFEX launches polysilicon futures contracts

Beijing, 26 December (Argus) — China's Guangzhou Futures Exchange (GFEX) has launched futures contracts and options for polysilicon today. This is the third contract that GFEX has launched, following the launch of its contracts for silicon metal in December 2022 and lithium carbonate in July 2023. The launch of polysilicon contracts is aimed at easing a supply surplus and ensuring market development, given increasing new capacities at polysilicon producers and lower-than-expected demand from the downstream silicon wafer industry in the past two years, according to market participants. The new contracts are for benchmark N-type polysilicon and substitute P-type polysilicon. The exchange has set a premium of 12,000 yuan/t ($1,644/t) for the N-type over the P-type. It is offering seven contracts starting from June 2025 until December. The most-traded June contracts for N-type polysilicon on the GFEX closed at Yn41,570/t on 26 December, up from the launch price of Yn38,600/t, with trading volumes totalling 301,655 lots, equivalent to around 905,000t. GFEX has established delivery points for the new contracts in eight provinces, including Inner Mongolia, Sichuan, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang. Output and consumption in these regions account for 93.1pc and 91pc of the country's total output and consumption respectively, according to GFEX. South China-based GFEX launched in April 2021 and is partly owned by China's four operational futures exchanges — the Shanghai Futures Exchange, Zhengzhou Commodity Exchange, Dalian Commodity Exchange and the China Financial Futures Exchange — with each holding a 15pc stake. Market reaction Some market participants expect the new futures contracts will ease pressure from ample spot inventories and shore up spot market sentiment in the coming months. But the market has yet to see immediate effects on the first trading day. Argus -assessed domestic prices for 5-5-3 grade silicon metal — a key feedstock in the production of silicon powder, which is the feedstock for polysilicon — held at Yn11,200-11,400/t delivered to ports on 26 December, unchanged from 24 December given limited buying interest from consumers. The most-traded February contracts for 5-5-3 grade silicon on the GFEX closed at Yn11,190/t on 26 December, down from Yn11,585/t on 25 December. China is the world's largest polysilicon producer, producing 1.74mn t during January-November, up by 33pc from a year earlier, according to data from the China nonferrous metals industry association (CNIA). It has an production capacity of over 2mn t/yr, according to industry estimates. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output to recover in FY2025: IEEJ

26/12/24

Japan’s crude steel output to recover in FY2025: IEEJ

Tokyo, 26 December (Argus) — Japan's crude steel output is expected to recover during April 2025-March 2026, given higher output in wider domestic industries, according to government affiliated think-tank the Institution of Energy Economy Japan (IEEJ). The country's crude steel output will increase by 4.1pc on the year to 86.5mn t in 2024-25, according to the IEEJ's projection on 24 December. This will mark the first year-on-year growth in four years. A recovery is mostly attributed to an uptrend in wider domestic industrial sectors including automobile, electric and industrial machinery, IEEJ said. It sees domestic car output increasing by 1.8pc to 8.9mn units from a year earlier. IEEJ did not provide further details, but it suggested that expanding investment for digital and green transformation will underpin the steel demand throughout the period. The think-tank also predicts that the country's steel product exports will increase by 1.2pc on the year following an upward trend in the global manufacturing sectors. Japan delivered around 32mn t of steel products overseas during 2023-24, according to the industry group the Japan Iron and Steel Federation (JISF). The country's crude steel output has been sluggish throughout 2024, partly owing to weak demand from the construction and automobile sectors. Rising material costs and labour shortages have led to fewer construction projects in the country, weighing on steel demand. Operational suspensions at major auto manufacturers including Toyota and Daihatsu, following alleged false reporting on safety test results, also pressured steel demand. This partially led to the tenth consecutive month of year-on-year decline in booked orders of ordinary steel for car use in October, according to JISF. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Viewpoint: US tariffs, new EAFs may alter scrap flows

24/12/24

Viewpoint: US tariffs, new EAFs may alter scrap flows

Pittsburgh, 24 December (Argus) — A wave of new electric arc furnace steel mills coming on line next year could transform scrap flows in North America, while looming US import tariffs could stunt cross-border trade. Six steel mills in the US and Canada, accounting for about 9.9mn short tons (st)/yr of electric arc furnace (EAF) production, are ramping up from late this year or scheduled to start up in 2025. The new EAFs, mostly along the Mississippi River and in Ontario, could be magnets for scrap and reshape flows across the southeast, Midwest and Canada, as scrap-fed EAF steelmakers continue to expand their role in North America, which was historically dominated by coal and iron ore-fed blast furnaces. Although some scrap dealers are optimistic about markets in the new year, market participants are carefully monitoring the effect president-elect Donald Trump's hawkish trade policies could have on scrap trading. Trump has pledged to impose 25pc tariffs on US imports from Canada and Mexico that could further shift North American scrap flows. Canada is the largest shipper of ferrous scrap into the US at an average of 3mn metric tonnes (t)/yr since 2021. Prime scrap imports between January and October this year averaged 47,000t/month, while shred imports averaged 70,000t/month, US customs data shows. The import tax would drive up the cost of Canadian scrap for US buyers and potentially reduce supply available to steel mills in the Midwest. Scrap traders noted that Trump can be unpredictable and may be using the threat of tariffs as leverage. "I'm pretty tepid on the first quarter," one Midwest dealer said. "People are trying to figure out how serious Trump is on tariffs." New EAFs to drive scrap demand The new scrap-fed EAFs in North America include Algoma Steel in Ontario, Hybar in Arkansas, and Nippon Steel's and ArcelorMittal's joint venture in Alabama. US Steel's Big River Steel began melting scrap at its second Arkansas EAF in October. EAF steelmaker Hybar plans to open its 630,000 st/yr reinforcing bar mill in northeast Arkansas in the summer of 2025. Hybar, along with Big River Steel and three Nucor mills already in the region, could further bolster the lower Mississippi River basin as a major scrap market. "I'm looking forward to next year because of the increased competition," a Midwestern scrap dealer said. "It's always good to have options." The new consumption could position northeast Arkansas and Tennessee as perhaps the top scrap consuming region, making it an industry barometer in 2025. Chicago has historically held that position and has been the benchmark region in contracts. Shifting flows in Canada Algoma Steel plans to begin ramping up two new EAFs in Sault Ste Marie, Ontario, in March next year to continue making hot-rolled coil and steel plate. The EAFs could eventually bring that facility's maximum steel production levels to 3.7mn st/yr once they fully replace Algoma's blast furnaces. The steelmaker will likely focus on low-copper shred and prime scrap grades to keep up the iron content in its melt mix as it transitions to EAF steelmaking, one Canadian scrap consumer said. Algoma may also continue to rely on raw inputs like direct reduced iron and hot briquetted iron as it ramps up its scrap buying to feed the EAFs. Market participants in Canada expect the mill to buy scrap from the prairies west of Sault Ste Marie, as well as from the greater Toronto area to the mill's east, though Algoma will face competition to pull scrap from the latter region. Scrap dealers in the upper Midwest are also keen to supply Algoma Steel because buyers in that region are scarce. A Midwest dealer noted that Algoma may ship in scrap from US ports on the Great Lakes. Algoma did not respond to requests for comment on its raw material plans. In 2021, the company set up a joint venture with Triple M Metal, a Canadian scrap dealer with 45 yards, that will likely supply scrap for Algoma Steel in Sault Ste Marie. By James Marshall and Brad MacAulay US steel mill capacity additions Million short tons/yr Company Location Product type Capacity added Start date US Steel/Big River Steel Osceola, AR Sheet 3.00 RAMPING ArcelorMittal/Nippon Steel Calvert, AL Sheet 1.65 2H 2024 Algoma Steel Sault Ste. Marie, ON Sheet 3.70 1Q 2025 Nucor Lexington, NC Bar 0.43 1Q 2025 Hybar Osceola, AR Bar 0.63 2Q 2025 CMC Berkeley, WV Bar 0.50 4Q 2025 Total 9.91 Argus reporting & public statements Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Viewpoint: US Gulf high-octane component prices to rise

24/12/24

Viewpoint: US Gulf high-octane component prices to rise

Houston, 24 December (Argus) — Cash prices of high-octane gasoline blending components in the US Gulf coast are likely to rise in 2025 after a year of declines as lower refining capacity starts to thin stocks. Alkylate and reformate cash prices and differentials have been lower over the course of 2024, in part from weaker refining margins. The lower margins are reflected in the region's crack spreads, which narrowed to $12.94/USG on 19 December from $18.67/USG a year earlier, as abundant supply in the region met weak demand . Inventories in the region have also been lower over the course of the year. Stocks in the region fell in November by 2pc from a year earlier to an average 29.75mn bl. US Gulf coast crack spreads have been declining steadily since 2022, according to the Energy Information Administration's (EIA) November Short-Term Energy Outlook, brought on by lower overall product demand, especially for gasolin e . But the EIA expects spreads to hold steady next year, even with a decrease in refining capacity, potentially supporting prices for high-octane components. The upcoming year will also bring a significant refinery closure to the region, which should reduce production and raise cash prices of components such as alkylate and reformate. LyondellBasell's closure of its 264,000 b/d Houston, Texas, refinery is scheduled to start in January. The refinery's fluid catalytic cracking unit (FCC), which converts vacuum gasoil primarily into gasoline blendstocks, is expected to be shut in February, followed by a complete end to crude refining by the end of the first quarter. US total refining capacity should fall to 17.9mn b/d by the end of 2025, according to the EIA, 400,000 b/d less than at the end of 2024, with the lower production leading to price increases. Although the LyondellBasell closing should eventually give crack spreads in the region a boost, some in the industry do not expect a return to pre-pandemic levels of refining margins in the immediate future. CVR Energy chief executive David Lamp said in November the company needed "to see additional refining capacity rationalization in both the US and globally" for crack spreads to gain ground. An increase in consumer demand for gasoline would also support a rise in cash prices and differentials for high-octane components. But the EIA in December forecast consumption nationwide would rise in 2025 by only 10,000 b/d, or 0.1pc, to 8.95mn b/d. By Jason Metko Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Viewpoint: FeV demand may grow next year

24/12/24

Viewpoint: FeV demand may grow next year

London, 24 December (Argus) — Ferro-vanadium (FeV) demand, which is closely tied to the carbon steel sector, has the potential to grow next year after a sluggish 2024, but economic and geopolitical uncertainties make conditions difficult to forecast. The outlook suggests FeV consumption will increase, driven by global steel production growth, particularly in countries such as India, as well as a potential rebound in key markets such as the US and Europe. The World Steel Association (Worldsteel) sees 2025 demand rising by 1.2pc to 1.772bn t, after a slight contraction this year. Most of the major economies, including China, are likely to record lower steel demand this year, although India bucks the trend, with robust demand growth expected throughout 2025. In developed economies, steel demand could grow by 1.9pc next year, driven by a recovery in the EU and, to a lesser extent, in the US and Japan. Buyers in Europe have been wary about purchasing large volumes of FeV in recent weeks, with fewer volumes expected in next year's long-term contracts as steel plants are looking for more flexibility and are "afraid of buying material that in the end they might not need", a trading firm said. Construction The construction sector remains a crucial driver of FeV consumption, primarily because of its dependence on steel for infrastructure projects. But the construction industry's challenges, particularly residential construction in developed economies, have dampened overall steel demand. High borrowing costs have stifled housing activity, with interest rate hikes slowing building projects. "A meaningful recovery in residential construction (in the EU, US and South Korea) is expected to begin from 2025 onwards with the expected easing of financing conditions," Worldsteel said. Rebar production also has faced challenges, with Chinese steel mills reducing output on lower demand from the real-estate sector up to September, when new rebar standards were introduced by China's government. The new standards were intended to encourage higher vanadium content in steel, but the anticipated FeV demand boost has not yet materialised because overall appetite for the alloy remains suppressed by ongoing struggles in China's real-estate sector. China's rebar output fell by 1.9pc on the year to 17.7mn t in October , with January-October output showing a 14pc drop from the same period a year earlier, according to data from the National Bureau of Statistics. Without any lift from China, European FeV prices remain driven primarily by weakness in the continent's own construction sector, which continues to limit steel rebar trading volumes. Argus' weekly Italian domestic rebar assessment was at €550/t ex-works on 11 December, marking an 11pc drop from the start of this year. Automotive The automotive sector, particularly the electric vehicles (EV) market, will be a key driver of FeV demand next year. High-strength low-alloy (HSLA) steel — a type of carbon steel known for its superior strength-to-weight ratio — is crucial for light vehicles and EVs. While light vehicles and EV manufacturing has slowed this year, with factory closures and inventory reductions by major carmakers such as Volkswagen and Stellantis , the industry is expected to recover next year as the push towards sustainability continues. The green transition, which includes renewable energy projects and electric grid expansions, will further contribute to the demand for HSLA steel and, by extension, FeV. But EV growth is likely to slow in the short term under the administration of US president-elect Donald Trump, who could prioritise traditional energy sectors, potentially limiting support for renewables, industry participants said. By Roxana Lazar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more