Shell, Chevron get first waivers to US steel tariffs
President Donald Trump's administration has given the oil and gas sector its first exclusions from a 25pc tariff on steel imports, after agreeing with Shell and Chevron that the specialty steel they were importing is not manufactured in the US.
The US Commerce Department today approved tariff exclusions for 243 metric tonnes of steel casing and production tubing that Shell said it will use when drilling wells in the US Gulf of Mexico. It also provided a tariff exclusion to Chevron for 50 metric tonnes of corrosion-resistant stainless steel tubing. The waivers will only last a year and are exclusive to the two companies.
The waiver approval marks a victory for the oil and gas industry, which is concerned that the tariffs could raise their costs. The Commerce Department has been working through a backlog of more than 20,000 steel tariff exclusion requests. The agency has has only processed a total of 241 requests since it began issuing waiver decisions on 21 June.
Shell in its request for a n exclusion said no US mills make the type of steel used in offshore wells, where high temperatures and high pressures are usually present. Shell is importing the product from Japanese steel producer Nippon Steel and Sumitomo Metal. The company also said there was a national security argument for approving the waiver.
"It does not serve the national security to delay or increase the cost of fuel extraction in the absence of domestic alternatives, particularly when the natural resources extracted will only serve to fuel the US economy's continued growth," Shell said in its request.
Chevron's waiver request also covered corrosion-resistant steel manufactured by Nippon in Japan that is not made in the US. The company said that domestic oil production was "critical to national security." Commerce denied one of Chevron's applications for a separate tariff waiver on 330 metric tonnes of corrosion-resistant tubing because it said the request was incomplete.
Chevron and Shell did not immediately respond for comment.
The US last week denied a request for a tariff exclusion for 135,000 t/y of steel tubing and casing that Borusan Mannesmann Pipe US said it would import from Turkey. Commerce said the imported products were manufactured in high enough volumes in the US.
Related news posts
Libyan crude production slips below 600,000 b/d
Libyan crude production slips below 600,000 b/d
Dubai, 30 August (Argus) — Libya's crude output has fallen to below 600,000 b/d, less than half what the country was producing just a month ago, according to figures reported by state-owned oil company NOC. Production has plummeted in recent days after Libya's eastern-based administration announced a blockade on oil output and exports in response to moves by its rival, the Tripoli-based Presidential Council, to replace the central bank governor. Libya produced 591,024 bl on 28 August, NOC said, down from 783,422 bl on 27 August and 958,979 bl on 26 August, NOC said. Production is almost certain to have fallen further on 29-30 August. It represents a more than halving of output in the space of just a month. Production stood at 1.28mn bl on 20 July, NOC said, while Argus assessed the July average at 1.2mn b/d. Total losses over 26-28 August amounted to around 1.5mn bl, worth just over $120mn. NOC said. All of Libya's eastern oil terminals — Es Sider, Ras Lanuf, Zueitina, Marsa el Hariga and Marsa el Brega — received instructions to stop operations at 15:00 local time on 29 August, according to port agents in the country. Some tankers have managed to load crude since the blockade was announced at the start of the week. The New Amorgos and Ohio loaded at Zueitina and Es Sider, respectively, and have since sailed from the country. Five more tankers were scheduled to load crude in the country from today, according to Kpler tracking, four of them in the east. The clash between the rival east and west political factions in Libya had been brewing for over week before the blockade announcement. The eastern-based Libyan National Army (LNA) has imposed several politically motivated oil blockades in the past few years. The LNA ordered the shutdown of the El Sharara field earlier this month, resulting in the loss of around 250,000 b/d of output. By Nader Itayim Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Fortescue hold firms on 2024-25 iron ore target
Fortescue hold firms on 2024-25 iron ore target
Beijing, 30 August (Argus) — Australian iron ore producer Fortescue has reiterated its iron ore shipment target for the 2024-25 fiscal year ending 30 June of 190mn-200mn t, including 5mn-9mn t from its Iron Bridge project on a 100pc basis. The Iron Bridge magnetite project in Western Australia shipped its first cargo in July last year, with Fortescue's iron ore shipments totalling 191.6mn t for the full year . It had targeted to ship 192mn-197mn t for 2023-24. The company achieved a hematite average revenue of $103/dry metric tonne (dmt), up by 9pc on a year earlier. Hematite C1 costs for 2023-24 rose by 4pc from the previous year to $18.24/wet metric tonne (wmt) because of higher labour rates and mine plan driven cost escalation, although Fortescue said its cost control measures offset the partial increase. It forecasts hematite C1 costs for 2024-25 to rise to $18.50-19.75/wmt. The Argus ICX seaborne iron ore fines assessment for 62pc Fe cfr Qingdao averaged $119.40/dmt for 2023-24. Fortescue is on track to achieve real zero, or no fossil fuels and no offsets, for its scope 1 and 2 terrestrial emissions across its Australian iron ore operations by 2030. It is aiming to achieve this with building a new solar farm, deployment of electric excavators and the use of battery electric and hydrogen fuel cell haul truck prototypes. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US OCTG, line pipe imports fall in July
US OCTG, line pipe imports fall in July
Houston, 29 August (Argus) — Preliminary data from the US Department of Commerce shows that imports of oil country tubular goods (OCTG) and line pipe products fell in July. OCTG volumes fell by 88,100 metric tonnes (t) from the prior year, as volumes from Japan dropped by 15,500t, South Korea and Thailand both dropped by 13,500t, and volumes from Vietnam and Mexico fell by 11,300t and 9,300t, respectively. Volumes of line pipe less than or equal to 16in fell by 12,300t, as Italian volumes dropped by 4,500t, Ukraine dropped to zero from 4,400t in the prior year, and Brazilian volumes fell by 3,100t. Standard pipe imports increased by 13,400t on a 7,900t increase from Turkey. Heavy structural shape volumes jumped by 39,700t as Spanish volumes increased by 21,700t from the prior year, and imports from Germany rose by 9,200t. By Rye Druzchetta US pipe and tube imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 OCTG 95,792 183,909 -88,117 -47.9% 126,760 Line pipe 69,387 80,875 -11,488 -14.2% 87,976 Standard 66,100 52,716 13,384 25.4% 76,317 Heavy Structural Shapes 107,979 68,253 39,726 58.2% 54,096 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Line pipe is all diameters. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Higher flats volumes lead US steel imports up
Higher flats volumes lead US steel imports up
Houston, 29 August (Argus) — Higher volumes of flat steel imports led overall US steel imports higher in July. Total US steel imports for consumption were 2.2mn metric tonnes (t) in July, according to preliminary data from the US Department of Commerce. Hot-rolled coil (HRC) imports rose by 22,600t from the prior year, driven by a 32,900t jump in Japanese volumes, which were offset slightly by a 9,200t drop from Canada. Cold-rolled coil (CRC) volumes were up by 37,000t in July, with Canada exporting 8,800t more than the prior year. Hot-dipped galvanized (HDG) coil imports from Brazil jumped by 17,200t from the prior year, while volumes from Mexico rose by 13,000t. Volumes of blooms, billets and slabs dropped by 121,900t, as Mexico's volumes dropped to zero from 95,800t in the prior year. By Rye Druzchetta US steel imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 HRC 156,952 134,326 22,626 16.8% 156,861 CRC 172,746 135,778 36,968 27.2% 113,400 HDG 233,511 165,607 67,904 41.0% 238,809 Blooms, billets, slabs 364,138 486,053 -121,915 -25.1% 395,478 Total (all items)* 2,197,347 2,153,126 44,221 2.1% 1,955,800 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
![](/_next/image?url=%2F-%2Fmedia%2Fproject%2Fargusmedia%2Fmainsite%2Fimages%2F14-generic-hero-banners%2Fherobanner_1600x530_generic-c.jpg%3Fh%3D530%26iar%3D0%26w%3D1600%26rev%3D-1%26hash%3DFC2BEDE406483FEF5FDB9549159BAC11&w=3840&q=75)
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more