Latest market news

Viewpoint: Cobalt prices face supply pressure

  • : Metals
  • 18/12/27

US cobalt prices will likely decline in the first half of 2019 as supplies of metal and upstream cobalt products outweigh demand. Meanwhile, greater output and lower production costs will outstrip a bump in indium demand over the same period.

Cobalt

US cobalt prices are projected to decline in the first and early second quarter before bottoming out until the end of the first half of 2019, according to market participants.

Availability of both cut and broken cathode is widely expected to outstrip demand early in the year. Supplier stocks are projected to remain at steady levels, enough to meet more than typical spot market consumption rates once foundries and superalloy producers return for January and February restocking purchases. This is estimated to be at or below 2018 levels as new forward contracts settled in prior months begin to come into effect.

Imports of wrought and unwrought cobalt including alloys grew by 4pc to 7,777t in the first 10 months of 2018 compared to a year earlier, according to US Department of Commerce data.

Traders and smaller suppliers remain hesitant to import additional metal from China, owing to the delayed threat of increased tariffs. The US and China tentatively agreed to delay tariff decisions for 90 days or until 1 March. Market participants previously expected tariffs to rise to 25pc from the current 10pc levels on Chinese metal on 1 January. Although stocks of Chinese metal are expected to fall until March, some market participants forecast a falling Chinese yuan to US dollar exchange rate and lower metal prices to sustain the competitiveness of Chinese origin metal.

Falling cathode prices, steady generation rates and abundant stocks could further raise cobalt scrap supplies, lowering production costs as well. Dealers and processors anticipated cutting buying levels for alloy scrap as margins were squeezed by falling prices and intrinsic values. The drop in value has exacerbated concerns over atypically large stocks held by some remelters. US imports of cobalt scrap rose by 56pc to 2,054t through October.

Investment funds could also destock larger cobalt positions early in the year. The destocking would further weigh on prices, as battery demand fell below expectations for much of the second half of 2018. Uncertainty over lithium-ion battery consumption rates in early 2019 coupled with abundant supplies of precursor cobalt and lithium materials in Asia are expected to pressure some funds to sell out of positions.

In the first half of 2019, US demand is expected to remain firm, supported by consistent aerospace, medical and oil and gas alloy demand.

Glencore raised output by 44pc to 28,500t through the third quarter of 2018. This mainly reflected a 6,500t contribution from the restart of its Katanga operations. Other producers had mixed results. Vale's production of cobalt was down by 12pc to 3,657t over the first nine months of the year, and Sherritt International's output fell by 9pc to 1,180t. Meanwhile, China Molybdenum hit a record high output of 9,029t in the first half of the year.

Rising supplies and falling replacement costs forced US cobalt prices down over much of the second half of 2018. Cobalt prices fell by 18pc to $33.25-34.00/lb between June and mid-August. The market traded flat until early October when renewed demand boosted prices to a high of $34.50/lb. Waning demand and ample supplies set off another wave of falling prices, which were assessed 4 December down by 8pc to $30-32.87/lb from the October levels.

Indium

US indium prices are expected to decline in the first half of 2018 as surplus stocks and higher production rates outpace demand.

Supplies of both western and Chinese origin indium are widely expected to climb on flat demand, lower production costs and production ramp ups. Market participants anticipate prices to fall early in the year, led by a drop in Chinese export prices. A scaling back of environmental checks and regulations coupled with an expected cash crunch for some suppliers will encourage a sell off of inventories.

US solder, alloy and optics producers are projected to remain sporadic buyers into the first and second quarter, while indium-tin-oxide demand across South Korea, Japan, China and Taiwan—the largest source of global demand—will only grow slightly.

Traders and suppliers expect close competition for first-half sales as domestic suppliers avoid taking a loss on older, more expensive inventory, which has built up for some over the last months of 2018. The typical pickup in demand from US consumers between January and March is expected to be washed out by oversupply concerns across Asia-Pacific.

This could exacerbate ample current stocks in the US. Imports of unwrought indium were up by 15pc to 115t over the first 10 months of 2018 compared to a year earlier.

In addition, supplies of crude indium in China are expected to continue easing into the first quarter as several producers restart in southern and eastern China after environmental checks wrapped up. Total output over the year is expected to rise by as much as 85t across western and Chinese producers.

US suppliers were also concerned that cash and financial restrictions in China coupled with declining indium prices could prompt some suppliers to sell off additional metal.

Domestic consumption rates will remain steady in the first quarter but spot market demand is projected to slide from a year earlier. This is because of larger-than-usual stocks after consumers bought ahead in the third quarter to avoid potential tariffs. The delaying of tariff decisions until 1 March is anticipated only to restrict buying for a longer period.

US indium prices fell throughout most of the second half of 2018. Waning spot market demand met with ample supplies to force prices down by 20pc to $230-254/kg on 4 December. Indium traded flat between late September and October sustained by consistent restocking demand ahead of the expected tariff decision in January. Once the restocking purchases were completed and supplies eased, prices resumed sliding.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/11/21

US alleges Nippon dumped HRC at higher rates

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Recent deep-sea and short-sea cfr Turkey scrap deals


24/11/21
24/11/21

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output drops further in October


24/11/21
24/11/21

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ArcelorMittal could close two service centres in France


24/11/20
24/11/20

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Graphjet launches Malaysian biomass-to-graphite plant


24/11/20
24/11/20

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more