China issues third batch of scrap metal import quotas

: Metals
19/08/14

The Chinese government has approved just under 100,000t of scrap metal imports in the third quarter in its third batch of quotas announced today.

The additional quotas issued today by China Solid Waste and Chemicals Management, part of the environment ministry, are for 99,370t of copper, aluminium and ferrous scrap for delivery to ports in south, southeast and north China.

The extra quota for copper scrap — under harmonised tariff code 7404000090 — is 87,680t, the quota for aluminium scrap — tariff code 7602000090 — is 11,290t and ferrous scrap is 400t.

The copper scrap quota is for delivery to the ports of Tianjin, Ningbo, Shanghai, Xiamen, Qingdao, Nanhai, Nansha and Wuzhou, while the aluminium scrap quota is for Tianjin, Nanhai and Nansha.

The amount of third-quarter copper quotas approved to date stands at 452,559t, aluminium at 372,476t and ferrous at 20,918t.

The import quota for copper scrap is below the amount imported in the third quarter of last year, whereas the aluminium scrap quota is above last year's third-quarter import figure.

China imported 624,276t of copper scrap and 349,510t of aluminium scrap in July-September 2018, customs data show.

Although the scrap metal import quotas are lower than expected, many plants in China are not operating at capacity because of weak manufacturing orders. Demand for scrap metal has been lagging as a result.

"There is no licence issue, [the Chinese firms] can't even fulfil their quotas because the market is so slow," one European supplier said.

Under the new policy, all scrap metal importers in China will need import licences issued under approved quarterly quotas from 1 July before they can receive any material.

The previous quotas were announced on 10 July and 20 June. It is unclear if another batch will be issued before September.

China imported 5.32mn t of scrap last year, of which copper accounted for 45pc, or 2.41mn t, aluminium 1.57mn t and ferrous 1.34mn t.

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/12/27

Viewpoint: US stainless recovery expected in 1H

Houston, 27 December (Argus) — US finished and scrap stainless steel market participants are cautiously optimistic for 2025 because of low inventories, waning imports and expected policy changes when president-elect Donald Trump takes office in January. The stainless steel market expects a challenging early start to 2025 before a rebound later in the first half of the year, as renewed demand from the oil and natural gas sector combines with low inventories and potential Trump policies. US stainless meltshop production in the first half of 2024 totaled just over 1mn metric tonnes (t), up from the atypically low 2023 levels of roughly 940,000t, according to data from World Stainless. These figures are well below prior years with the US averaging about 1.18mn t in the first half of 2021 and 2022. The market has struggled to hit its full stride in 2024 as consistent finished imports and falling nickel prices undercut the market. Flat rolled coil ex works US prices for 304 declined to $1.60-1.77/lb for December shipments, compared with $1.68-1.86/lb a year earlier. Still, this trend could soon stabilize and begin to reverse. Sources estimate US service center finished stainless steel inventory levels for both flat rolled and long bar products are at lows last seen in 2021, a time when US demand was still crimped from the Covid-19 pandemic. Service centers have kept unusually low inventories because of a mix of moderate demand and higher-than-usual interest rates raising end-of-year accounting costs. Weaker service center demand has subsequently capped scrap generation, limiting how low US mills can push their raw material costs for new scrap. Average US stainless steel scrap 304 solids prices have held within a tight 2¢/lb spread of 56.5-58.5¢/lb since early August as falling generation rates ran up against lower demand. The incoming Republican administration has fostered an atmosphere of optimism among market sources, who expect Trump policies will support the domestic industry by cutting oil and gas permitting restrictions, shifting US spending away from overseas investments and broader deregulation of American businesses. Trump has also proposed a myriad of tariffs, including specifically targeting China and the US' largest trading partners — Canada and Mexico. US imports of flat rolled stainless of any size climbed by 22pc to 404,000t in 2024 so far, according to US customs data. Mexico contributed roughly 7pc of these volumes, while Indonesia — home to multiple Chinese stainless mills — contributed 8pc of US imports. By raising import costs, US producers could in theory make up some of this difference. Stainless producers will likely have to raise prices as a result of tariffs, following a year with far fewer base prices adjustments. Long producer Universal Stainless raised base prices only once in 2024 compared to five times in 2023. Nickel-scrap disconnect widens US mills have offset the persistent weak demand by tweaking the nickel payable — the percentage of the price of nickel they are willing to pay for nickel recovered from scrap — each month since April. The nickel payable rate reached a historic low of 42-43pc in 2023, before rebounding. Although up from historic lows, nickel payable has decreased from 57-59pc in March of this year to 50-54pc for procurements in November. At these lower levels scrap is more disconnected from the movements in the nickel market. Some market participants still remain concerned, chiefly over slowing growth in China, which consumes nearly 50pc of the world's nickel. China has ramped up production of nickel largely in Indonesia in recent years to service the growing electric vehicle market. Market conditions in Europe also continue to undercut demand. Spanish stainless producer and owner of US-based North American Stainless, Acerinox, highlighted in its third quarter results that the European manufacturing sector is undergoing a "drastic contraction". It added that while destocking efforts were completed at the time, demand remained weak. By Pete J Stavretis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Viewpoint: Indian FeCr to face pressure in 1Q 2025

24/12/27

Viewpoint: Indian FeCr to face pressure in 1Q 2025

Mumbai, 27 December (Argus) — India's ferro-chrome market is expected to remain under pressure in the first quarter because of muted spot demand as a result of sluggish stainless steel consumption. Producers will likely keep ferro-chrome output low in the coming months. The market is widely expected to remain sluggish until after the lunar new year holiday in February. There is little to no optimism that spot liquidity and supplier profit margins will increase in the short term, because demand from the stainless steel industry is weak. Prices for Indian high-carbon ferro-chrome 60pc fluctuated significantly in 2024. Prices hit a high of 120,000-121,000 rupees/t ($1,400-1,415/t) ex-works on 21 February, bolstered by tight ore availability and rising feedstock costs. But weak demand for stainless steel, both locally and globally, kept many market participants on the sidelines, causing prices to fall sharply in April-August, reaching Rs102,000-104,000/t ex-works on 20 August. Prices have since remained around this level, with the Argus assessment on 12 December at Rs104,000-106,000/t. Low demand from the stainless steel sector has effectively removed any possibility of a price recovery in the near term. Spot liquidity has been markedly lower than normal and a rebound is not expected. Volumes signed on long-term contracts for delivery in 2025 have also taken a dip and are at around 70-80pc of the volumes signed in 2023 for 2024 delivery. Weaker ferro-chrome demand and prices have led to lower production. India's ferro-chrome output declined from 1.3mn-1.4mn t in 2023 to an estimated 1.2mn t in 2024, and monthly consumption in the country is estimated to have decreased from 30,000-35,000t to 20,000-25,000t. Consumption is unlikely to rebound significantly until global and local stainless steel demand recovers. Suppliers typically turn to the export market when there is a supply surplus, with exports from India typically accounting for around 50pc of the country's output. But India's ferro-chrome exports are also falling. Shipments declined by 38pc year on year to 402,817t in January-September, compared with 648,475t over the same period a year earlier. Macroeconomic headwinds have dented global demand for stainless steel, and in turn ferro-chrome. European and Chinese demand was high in the first half of 2024 but has slowed significantly since then, with European buyers shifting their focus towards cheaper Kazakh material. Increased freight rates, port congestion and higher production costs have further weighed on exports. In addition, China has increased production and its domestic output now exceeds domestic consumption. This has weighed on domestic prices since August and increased supply in the export market. The market is unlikely to pick up until ferro-chrome inventories at China's port are consumed, a source told Argus . Decreasing demand and prices have made some suppliers' margins negative, forcing some to cut output by 50-60pc and others to shift their focus to producing manganese alloys, which offer stronger margins despite higher production costs. The cost of production for high-carbon ferro-chrome in India is around Rs116,000-119,000/t ex-works. Only producers with their own captive chrome ore mines are making a profit at present, sources said. Indian ferro-chrome suppliers also face issues with deteriorating chrome ore grade, which has led to increased production costs and lower-quality ferro-chrome output. The deterioration in ore quality is particularly evident in state-owned Odisha Mining Corporation (OMC) auctions — the premium for OMC's 50-52pc ore over its 48-49.99pc ore rose to above Rs1,000/t in early December. The higher premiums for high-grade ore, coupled with the drop in demand, have limited ferro-chrome producers' appetite to participate in OMC's auctions, as supply of high-grade ore is limited and only available at high premiums while low-grade ore is unfavourable as its consumption raises production costs. A lack of interest in OMC's monthly tender boosted this bearish sentiment and created further downward pressure on India's ferro-chrome prices. By Deepika Singh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Viewpoint: Real, tariffs to hit Brazil steel imports

24/12/26

Viewpoint: Real, tariffs to hit Brazil steel imports

Sao Paulo, 26 December (Argus) — Steel importers in Brazil are likely to face a tougher market in 2025 as government measures and the Brazilian real's depreciation to the US dollar make products from abroad less attractive. Brazilian steel importers are concerned that tariff-quota and antidumping policy changes made this year by the federal and state governments could raise costs for importing cargoes in 2025, likely exacerbating the impacts of a sharply depreciated Brazilian real relative to the dollar. The concerns come as US president-elect Donald Trump is already raising global trade tensions, with specific focus on Mexico, Canada and China, that could unleash waves of dueling trade measures. After seeing strong import growth in the post-Covid-19 recovery, Brazil steel importers are fretting they may lose momentum. Brazil's steel imports year-to-date November rose by nearly 24.4pc to 5.6mn metric tonnes (t) from the same period a year earlier. They are expected to end the full year 2024 up by 24pc, according to steel association Aco Brasil, after climbing by 50pc in 2023. Apparent consumption rose by 9.6pc to 24mn t in the 11 months through November, while production increased by just 5.6pc to 31.17mn t from a year earlier. Even with a 28pc depreciationof the real to the dollar in the 12 months through 24 December, prices for dollar-denominated steel imports still have a cost advantage over domestically produced steel. But that advantage is narrowing as the real weakens, with the price difference from imports over the domestic market narrowing to just $112/t in the latest assessment for hot-rolled coils (HRC) from $172/t in mid-October . "The dollar's [appreciation to the real] is messing up imports," one market participant told Argus , saying a wider price advantage for importers was necessary to offset issues like the exchange rate risk and the shipping time. Market participants also cited rising borrowing costs in Brazil as an additional challenge for imports, as many buyers rely on financing to purchase material from abroad. Brazil's central bank on 11 December unexpectedly hiked its target interest rate by a full percentage point to 12.25pc , citing the country's uncertain fiscal situation, accelerating inflation and challenging external conditions. Importers recently expressed concerns over Santa Catarina state's decision to no longer grant tax incentives for imports of six different steel and iron products for commercialization or resale in 2025. Although the timeline for implementing the measure was postponed to July and could face changes, importers remain concerned and are monitoring any possible reviews of the decision, sources told Argus . Santa Catarina's main port, Sao Francisco do Sul, accounted for over one-third of every steel product that is imported to Brazil from January to September, according to data from the country's distributors association, INDA, published in September. On the federal front, the government is likely to announce new and renewed antidumping measures for products coming mainly from China, Brazil's largest steel supplier. Another obstacle for importers would be a possible review of the tariff system for steel imports, which was implemented in June 2024 and led to additional tariffs of up to 25pc. The measure proved mostly ineffective at curbing imports into Brazil, and the industry group Aco Brasil said it would ask for adjustments . Despite the challenges, there is still room for importers to bring material to Brazil , as the country lacks steel to supply its domestic demand, another market participant said. "Brazil will always need imports because it still lacks some key home-made products to feed its market," the participant said. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

China's GFEX launches polysilicon futures contracts

24/12/26

China's GFEX launches polysilicon futures contracts

Beijing, 26 December (Argus) — China's Guangzhou Futures Exchange (GFEX) has launched futures contracts and options for polysilicon today. This is the third contract that GFEX has launched, following the launch of its contracts for silicon metal in December 2022 and lithium carbonate in July 2023. The launch of polysilicon contracts is aimed at easing a supply surplus and ensuring market development, given increasing new capacities at polysilicon producers and lower-than-expected demand from the downstream silicon wafer industry in the past two years, according to market participants. The new contracts are for benchmark N-type polysilicon and substitute P-type polysilicon. The exchange has set a premium of 12,000 yuan/t ($1,644/t) for the N-type over the P-type. It is offering seven contracts starting from June 2025 until December. The most-traded June contracts for N-type polysilicon on the GFEX closed at Yn41,570/t on 26 December, up from the launch price of Yn38,600/t, with trading volumes totalling 301,655 lots, equivalent to around 905,000t. GFEX has established delivery points for the new contracts in eight provinces, including Inner Mongolia, Sichuan, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang. Output and consumption in these regions account for 93.1pc and 91pc of the country's total output and consumption respectively, according to GFEX. South China-based GFEX launched in April 2021 and is partly owned by China's four operational futures exchanges — the Shanghai Futures Exchange, Zhengzhou Commodity Exchange, Dalian Commodity Exchange and the China Financial Futures Exchange — with each holding a 15pc stake. Market reaction Some market participants expect the new futures contracts will ease pressure from ample spot inventories and shore up spot market sentiment in the coming months. But the market has yet to see immediate effects on the first trading day. Argus -assessed domestic prices for 5-5-3 grade silicon metal — a key feedstock in the production of silicon powder, which is the feedstock for polysilicon — held at Yn11,200-11,400/t delivered to ports on 26 December, unchanged from 24 December given limited buying interest from consumers. The most-traded February contracts for 5-5-3 grade silicon on the GFEX closed at Yn11,190/t on 26 December, down from Yn11,585/t on 25 December. China is the world's largest polysilicon producer, producing 1.74mn t during January-November, up by 33pc from a year earlier, according to data from the China nonferrous metals industry association (CNIA). It has an production capacity of over 2mn t/yr, according to industry estimates. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output to recover in FY2025: IEEJ

24/12/26

Japan’s crude steel output to recover in FY2025: IEEJ

Tokyo, 26 December (Argus) — Japan's crude steel output is expected to recover during April 2025-March 2026, given higher output in wider domestic industries, according to government affiliated think-tank the Institution of Energy Economy Japan (IEEJ). The country's crude steel output will increase by 4.1pc on the year to 86.5mn t in 2024-25, according to the IEEJ's projection on 24 December. This will mark the first year-on-year growth in four years. A recovery is mostly attributed to an uptrend in wider domestic industrial sectors including automobile, electric and industrial machinery, IEEJ said. It sees domestic car output increasing by 1.8pc to 8.9mn units from a year earlier. IEEJ did not provide further details, but it suggested that expanding investment for digital and green transformation will underpin the steel demand throughout the period. The think-tank also predicts that the country's steel product exports will increase by 1.2pc on the year following an upward trend in the global manufacturing sectors. Japan delivered around 32mn t of steel products overseas during 2023-24, according to the industry group the Japan Iron and Steel Federation (JISF). The country's crude steel output has been sluggish throughout 2024, partly owing to weak demand from the construction and automobile sectors. Rising material costs and labour shortages have led to fewer construction projects in the country, weighing on steel demand. Operational suspensions at major auto manufacturers including Toyota and Daihatsu, following alleged false reporting on safety test results, also pressured steel demand. This partially led to the tenth consecutive month of year-on-year decline in booked orders of ordinary steel for car use in October, according to JISF. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more