Shagang cuts steel prices as winter onset slows demand

: Metals
19/10/21

Chinese private-sector producer Jiangsu Shagang cut its rebar ex-works prices by 100 yuan/t ($14/t) for late October deliveries on rising supplies and sluggish demand.

Shagang's base rebar specification HRB400 with 16-25mm diameter will be offered at Yn3,800/t for late October deliveries, effective from today.

Construction steel demand is showing signs of easing as cold weather takes hold in north China. Construction steel demand typically slows in the winter months, although over the past couple of years the extent of this has been much smaller than in previous years. Steel producers in north China typically ship supplies to south and east China where winters are less severe, putting pressure on rebar prices.

Shanghai rebar prices have fallen by Yn110/t to Yn3,630/t ex-warehouse since 10 October.

China produced 21.27mn t rebar in September, up by 11.6pc from a year earlier, according to latest data provided by the national bureau of statistics. January-September output was 185.31mn t, up by 19.3pc.

Shagang on 18 October also cut its heavy melt scrap No.3 purchasing price by Yn30/t to Yn2,700/t with a total price cut of Yn90/t during 10-21 October.

Shagang did not revise prices for wire rod and small size rebar.

Shagang listed prices effective from 21 October:

HRB400 6mm rebar at Yn4,500/t
HRB400 8-10mm rebar at Yn4,200/t
HRB400 16-25mm rebar at Yn3,800/t
HRB400 10mm rebar at Yn3,960/t
HRB400 12mm rebar at Yn3,900/t
HRB400 14mm rebar at Yn3,830/t
HRB400 28-32mm rebar at Yn3,860/t
HRB400 36mm and 40mm rebar at Yn4,050/t
HRB500 rebar sizes are Yn350/t higher than HRB400
HRB500E rebar sizes are Yn380/t higher than HRB400
HPB300 6.5mm wire rod at Yn4,160/t

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/10/31

First northwest European HRC options trade on CME

London, 31 October (Argus) — Options contracts settled against the Argus northwest European hot-rolled coil (HRC) index traded today for the first time since their launch on the CME Group exchange more than two years ago. An option on the northwest European HRC contract on CME (EHR) traded today at a premium of €20/t for the right to buy a strip for the first quarter of 2025 (50 lots or 1,000t of January, February and March) at €700/t. Options are a financial contract offering the right, but not the obligation, to buy or sell an underlying asset — in this case the EHR futures contract — for a specific price at a specific point in time. The right to buy is called a call option; the right to sell a put option. The buyer pays a premium to have this right, which is typically used to protect against an adverse market move. The Argus northwest European HRC index stood at €558.75/t on Wednesday, while the January-March futures contracts are currently trading at about €620/t, putting the call option above the current spot market price and forward curve for the contracts in question. Market participants suggested the trade could be part of a ‘short collar' strategy, in which someone who is ‘long' on the underlying futures contract (trading on anticipation of an upwards move) buys a put option (the right to sell at an agreed price) to protect their long position for a premium, but then sells a call option to receive a higher premium to offset the cost of the put. CME Group launched the EHR futures contract in March 2020. Since then more than 3.6mn t of steel futures have traded, with more than 1mn t this year alone. Open interest — a measure of liquidity measuring the volume of open contracts — currently stands at a record high of more than 230,000t. Options were added in May 2022. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US economy grows by 2.8pc in 3Q, led by consumers

24/10/30

US economy grows by 2.8pc in 3Q, led by consumers

Houston, 30 October (Argus) — The US economy grew by an annualized 2.8pc in the third quarter, led by consumer and government spending and exports. Gross domestic product (GDP) growth slowed from 3pc in the second quarter, the Commerce Department reported today. Personal consumption grew at a 3.7pc pace, up from 2.8pc in the second quarter and 3.5pc a year earlier. Today's GDP estimate is the first of three for the quarter, and comes in slightly below analyst estimates in a Trading Economics survey of 3pc growth. The latest figure marks a 10th quarter of GDP growth since a 1pc contraction in the first quarter of 2022. It comes ahead of a closely fought presidential election on 5 November in which the health of the economy is a major issue. Exports grew by 8.9pc in the latest quarter compared with 1pc in the second quarter. Imports, which subtract from growth, grew by 11.2pc. Government spending, including investment for defense, rose by 5pc following 3.1pc growth in the second quarter. Private domestic investment slowed to 0.3pc growth from 8.3pc growth. Residential investment fell by 5.1pc, as the housing market remains in a downturn, after declining by 2.8pc in the second quarte r. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US Ni: Cathode premiums under pressure

24/10/24

US Ni: Cathode premiums under pressure

Houston, 24 October (Argus) — The US 4x4inch cathode spot premiums for refined nickel dropped this week as demand from stainless steel consumers remained soft. Nickel premiums for full truckload melting grade 4x4inch cathodes were assessed at 60-65¢/lb, down from 65-70¢/lb, while premiums for briquettes were assessed unchanged at 30-35¢/lb from last week. Nickel prices have been volatile on the London Metal Exchange (LME) recently, falling to a 30-day low this week. The official three-month LME nickel settled at $16,280/metric tonne (t) on Thursday, down by 3.6pc from $16,880/t on 17 October. Specialty stainless steel demand is expected to be soft for the balance of the year. Spot nickel market has been quiet, with most consumers requirements were mostly satisfied with annual contracts. Sources reported 4x4inch off cuts from Indonesia were offered to US consumers at a reduced rate. The US is not necessarily a preferred destination for Indonesia nickel due to transportation delays and payment terms. Global nickel stocks in LME warehouses increased by 1.1pc to 135,816t, from 134,322t a week earlier. The LME nickel daily cash month-to-date average for October is $17,101/t ($7.76/lb), compared with the full month September average of $16,117/t ($7.31/lb). Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Q&A: Aço Brasil to ask for steel tariff adjustment

24/10/24

Q&A: Aço Brasil to ask for steel tariff adjustment

Sao Paulo, 24 October (Argus) — Little has changed in the Brazilian steel market after nearly four months of a new tariff system intended to curb the increase of imported products. January-September imports rose by 24pc from the same period a year ago, totaling 4.6mn metric tonnes (t), surpassing what was expected for the full year. The tariffs, hailed by some market participants as missing the mark , was followed by other government measures, such as temporary antidumping measures and antidumping reviews. Industry group Aço Brasil's executive president Marco Polo de Mello Lopes spoke to Argus about the recent measures taken by the Brazilian government. This interview has been translated from Portuguese and edited for clarity. The government's June decision imposed a quota system for importers, along with a tariff increase. How does Aço Brasil see that decision's effects now? We are only four months into the tariff quota system. We have been following everything with a very large magnifying glass and we have some concerns. The tariff quota system has not brought the expected reduction [to import volumes], though it is too early to reach a conclusion. But it brought a change in the trend of what had been happening. At the beginning of the year there was an increase in products in general, but when you check June, July, August and September, you see that imports are decreasing every month. As we had a very high first half, we did not reach what was expected in terms of imports. So far, we see that we have not achieved the reduction objective, but we have achieved the objective of stopping the escalation in relation to these imports. What are Aço Brasil's main concerns with the June policy? It was identified that there was an increase in imports from Egypt and Peru. Egypt has a preferential agreement in relation to what would be a Mercosur-Egypt agreement. We are already evaluating to see what to do specifically regarding the fact that imports are increasing using the trade agreement umbrella. Another area of great concern is the excessive volume of imports that are entering through Manaus [the capital of northern Amazonas state]. It is strange that imports have increased without corresponding [demand] growth [at] the industrial park in Manaus. We continue monitoring to hold new meetings with the government. Brazil's executive management committee of the chamber of foreign trade (Gecex) last week ruled on the tariff increase for some steel products regardless of the import volume, unlike the first decision by the committee earlier this year. What is Aço Brasil's view on that decision? We understand that it is positive — it means there is recognition from the government that there are predatory imports that cause great concern in the sector. It couldn't have been any other way. So [we see it as a] very positive [measure]. The claim that had been made since the beginning was a 25pc [tariff hike]. It was always 25pc because it is what the world has been practicing. If the government approves it, it is within what was expected. What are the next steps for Aço Brasil to improve the situation for Brazilian steelmakers? We will certainly make requests to change the system. We are going to make some kind of movement, but it cannot be done now because there is already an [established] system. Imagine if companies that invested and spent energy and obtained a quota then had the government saying that they no longer have a quota, and could not challenge the decision in the courts. Any changes that may be made must be made following the renewal process of the current system, which would be in June 2025. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Boeing workers reject labor deal, extend strike

24/10/24

Boeing workers reject labor deal, extend strike

Houston, 24 October (Argus) — Striking Boeing employees spurned a tentative labor deal struck between the aircraft maker and union leadership, continuing a costly work stoppage that has halted production of the company's flagship 737 MAX aircraft, along with its 767 and 777 widebody programs. Up to 64pc of factory workers backed by the International Association of Machinists and Aerospace Workers (IAMAW) on Wednesday voted to reject the company's offer, which promised a 35pc general wage increase spread over four years and increased company retirement account contributions. That pay raise, while an improvement over Boeing's first offer of 25pc, ultimately fell short of the 40pc increase sought by workers. Another sticking point centered around the return of employees' pension plans, which was not included in the latest proposal. Boeing had no comment on the vote's outcome. Ending the strike has been the priority of new Boeing chief executive Kelly Ortberg, who assumed the leadership position in August. The five-week work stoppage likely has cost the company $4.5bn based on the latest estimates from Anderson Economic Group and has forced Boeing to delay its goal of increasing 737 MAX build rates to 38/month by the end of the year. The company reported a third quarter loss of $6.2bn on revenues of $17.8bn. The strike's continuance also will exacerbate slowdowns within Boeing's supply chain, which "it turned off in many cases" because of the labor action. The company confirmed it had stopped shipments from certain suppliers, effectively shutting them down and forcing some to announce furloughs — including at its shipset supplier Spirit Aerosystems . Boeing is keeping other suppliers running "hot," either because the company felt some were behind on shipments or because risks were too great to shut them down. That latter group likely includes titanium melters, whom Boeing wants to keep operating at high levels to meet demand requirements for when the aerospace manufacturer increases ramp rates starting in 2025. Still, several market participants within the titanium value chain have expressed concerns to Argus that an extended strike could disrupt future scrap generation in the US, saying there remains enough inventoried material in the pipeline to cover near-term demand. It remains to be seen when negotiations between Boeing and union leadership will resume. The most recent round of talks were mediated by Julie Su, the acting secretary of the US Labor Department. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more