Latest market news

Jubilee metals to increase chrome output

  • : Metals
  • 19/11/06

London- and Johannesburg-listed tailings treatment specialist Jubilee Metals expects to increase its chrome concentrate output by 8,000-10,000 t/month after acquiring the rights to tailings that were formerly owned by South African ferrochrome producer Hernic.

Jubilee has agreed to pay around $16.4mn to gain access to all the chrome in historic tailings at Hernic, which went into business rescue in 2017 and is in the process of being acquired by Samancor Chrome. This amounts to 1.7mn t of tailings, as well as 630,000t of previously processed tailings and 1mn t of surface material containing platinum group metals (PGMs).

The company, which also produces chrome concentrate from tailings at the Dilokong mine in South Africa's Limpopo province, currently has the capacity to process 55,000 t/month of chrome- and PGM-containing material at Hernic — which it calls its Inyoni project — with output of up to 9,000 t/month of saleable chrome concentrate and 2,250 oz/month of PGMs.

Jubilee produced 164,936t of chrome concentrate and 11,559oz of PGMs in the first half of 2019 and is aiming to increase its output of both metals streams in the second half of the year.

It is also advancing its Kabwe project in Zambia, which is focused on producing zinc, lead and vanadium from surface deposits, using the Sable zinc smelter acquired from Glencore.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

Thailand to extend BEV production commitment deadline


24/12/04
24/12/04

Thailand to extend BEV production commitment deadline

Singapore, 4 December (Argus) — Thailand's National Electric Vehicle Policy Board has approved an extension for battery electric vehicle (BEV) producers, which were supposed to fulfil their production commitment this year, according to the country's Board of Investment (BOI). BEV manufacturers received subsidies under the country's first phase of EV promotion measures — also called the EV 3.0 measures — and were supposed to produce one BEV this year for every vehicle they imported between 2022-23. The ratio will rise to 1½ BEV in 2025 for every imported vehicle. The unfulfilled portion of the production commitment will now roll over and manufacturers are required to instead follow the conditions under its second phase of EV promotion measures , the EV 3.5 measures. The portion that was not completed will not receive subsidies under either package, said BOI on 4 December. Subsidies under the EV 3.5 measures will "come into force" after those production commitments have been fulfilled. About 26 car manufacturers have applied to the incentive schemes, according to BOI. Thailand's Federation of Thai Industries (FTI) cut the country's 2024 auto output estimation twice this year. The estimation was cut from 1.9mn units to 1.7mn units in July, and once more to 1.5mn units in November. Thailand's total vehicle output in January-October came in at nearly 1.25mn units, down by 19pc compared to the same period a year earlier, according to FTI. October's vehicle output fell by 25pc on the year to 118,800 units, domestic sales dropped by 36pc to about 37,700 units and exports were down by 20pc to around 84,300 units. The country has produced 8,026 units of battery passenger cars, 159,176 units of hybrid passenger cars and 5,067 units of plug-in hybrid passenger cars over January-October, according to FTI. Cumulative registrations of battery passenger cars reached 213,173 units as of end-October, while that of hybrid passenger cars reached 455,364 units. The National Electric Vehicle Policy Board in July approved a temporary reduction of excise tax rate for hybrid EVs from 2028-32 on the conditions of car manufacturers investing in Thailand and adhering to strict vehicle CO2 emission requirements, which it said is expected to bring in around 50bn baht ($1.4bn) of new investments. Excise tax rates of between 6-9pc were set depending on HEVs' CO2 emission requirements. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Mexico factory contraction eases in November


24/12/03
24/12/03

Mexico factory contraction eases in November

Mexico City, 3 December (Argus) — Mexico's manufacturing sector contracted again in November, but at a slower pace than the previous month, according to the Mexican finance executive association's (IMEF) latest purchasing managers index (PMI) surveys. The manufacturing PMI rose to 48.3 from 47.2 in October, inching closer to the 50-point threshold that signals expansion. Still, the index remained in contraction territory for an eighth consecutive month. "There is some stabilization in the loss of economic momentum recorded in previous months," IMEF noted, but the overall trend reflects "stagnation or the absence of solid expansion in both manufacturing and non-manufacturing sectors." Manufacturing accounts for about a fifth of Mexico's economy. Within the manufacturing PMI, the new order index increased by 1.3 points to 47.3 but stayed in contraction. Production fell by 0.5 points to 46.1, with both sub-indicators in contraction for an eighth month. In contrast, non-manufacturing industries—including services and commerce—moved into expansion territory, rising to 50.5 in November from 49.3 in October. New orders in this sector climbed 2.1 points to 51.5, production rose 1.8 points to 50.5 and employment rose by 1.2 points to 49.1, though it remained in contraction for a fifth consecutive month. Inflation concerns raised Looking ahead, IMEF highlighted potential inflationary pressures tied to US President-elect Donald Trump's policies. These include possible supply chain disruptions driven by escalating conflicts with Russia and in the Middle East as Trump shifts toward a more transactional approach with traditional allies. IMEF also warned that Trump may seek to influence the US Federal Reserve to accelerate rate cuts, further fueling inflation. Domestically, deregulation and tighter migration constraints may fail to ease trade bottlenecks. Meanwhile, tax cuts without corresponding spending reductions could add significant upward pressure on prices, IMEF said. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Australia’s BHP and APA partner to cut GHG emissions


24/12/03
24/12/03

Australia’s BHP and APA partner to cut GHG emissions

Sydney, 3 December (Argus) — Australian energy firm APA Group has opened a solar farm and battery storage facility at Western Australia's Port Hedland in a move designed to support mineral giant BHP's emissions-reduction goals. APA's plant will power most of BHP's Port Hedland operations from January 2025, under the terms of a power purchase agreement signed between the two firms. Work on the project began last year, supported by a A$1.5mn ($970,000) grant from Western Australia's Clean Energy Future Fund. BHP is planning to reduce its operational greenhouse gas (GHG) emissions by 30pc from 2020 levels within the next six years, without using carbon credit schemes. In the 2023-24 financial year, the company's operational GHG emissions were 32pc lower than 2020 levels at 9.2mn t of CO2 equivalent, despite increasing 2pc on the year. BHP exports Western Australian iron ore through Port Hedland. Shipping data indicates that the company loaded an average of 5.94mn dwt/week of ore over the last three months . Argus ' iron ore fines 65pc Fe cfr Qingdao price was relatively stable over that period, growing from $113/t to $117/t. The Port Hedland opening comes just weeks after Prime Minister Anthony Albanese's government updated Australia's national emissions projection to forecast a 65.7pc baseline drop in electricity emissions, relative to 2020 levels, by the end of the decade. The government was forecasting a more modest 53pc decline in electricity emissions last year. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Liberty units to be repaid in Speciality restructuring


24/11/29
24/11/29

Liberty units to be repaid in Speciality restructuring

London, 29 November (Argus) — GFG Alliance entities Marble Power and Liberty Fe Trade DMCC will be excluded from Liberty Speciality Steel's restructuring plan, meaning they will be repaid, according to documents seen by Argus . GFG Alliance is the overall parent of Liberty Steel and all its subsidiaries. Speciality Steel owes and will pay Marble Power, its power supplier, around £11.5mn. Liberty Fe Trade is owed £1.4mn for the procurement of software licences, and will not have sufficient reserves to cover those licences without being paid. Liberty declined to comment. In total, GFG Alliance entities are owed over £288mn by Speciality Steel, but aside from Marble Power and Liberty Fe Trade, those claims will be released, reflecting a "significant contribution" from the wider parent, according to the restructuring documentation. In the event that Speciality Steel creditors accept its restructuring, enabling the company to keep operating, it will reduce its higher-margin aerospace work "as it is unable to retain quantities produced during the last two years for its largest two customers beyond the first half of 2025", Liberty's business plan states. Two main aerospace customers are supporting the business through upfront payments and premiums for accelerate deliveries, but this arrangement will end by May 2025, after which aerospace work will be significantly reduced. Key customers will provide £27.5mn in cash support to January 2025. As the aerospace work winds down, the company will "hire out the excess capacity to another steel producer", and discussions about this are continuing. Market sources have said Speciality could produce billet for British Steel's rolling operations. Going forward, Speciality will focus on vacuum-induction melting at Stocksbridge for other industries, such as oil and gas, and industrial engineering. Speciality will also source steel — including semi-finished products — externally to "increase deliverability of customer products". The business plan envisages the ebitda margin increasing from minus 188pc in February-March 2025 to 2pc in 2026. The plan assumes steady production through the year, other than seasonally reduced capacity in December and August. This would be a big change from this year, with just 50,000t of steel emerging from the electric arc furnace, which has a capacity closer to 1mn t/yr. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more