US looks to revive domestic titanium supply
The US is looking to re-establish its titanium supply chain after the last domestic titanium sponge plant closed in August and increased the country's reliance on imports of the critical metal.
Australian mining explorer Tao Commodities has acquired an option on a titanium and zircon project in Tennessee. The resource is 15km from one of the world's largest titanium-consuming pigment plants, owned by US-based Chemours.
Chemours has also opened a new facility in Georgia after it acquired an $86mn mineral sands mining project last year. The plant will produce titanium dioxide (TiO2) piment, as well as zircon to be used in precision casting.
US relies on imports in tightening market
Titanium dioxide demand for paints and pigments in the US has held up this year more than in Europe, Latin America and Asia Pacific, driven by demand for coatings and DIY, Chemours said in its second-quarter results.
China is the largest consumer of TiO2, and excess output that was previously exported from China is now being consumed in the country, Chemours said.
Covid-19 related shutdowns of ilmenite production in China and India in the first half of the year further exacerbated a global ilmenite shortage, while large pigment producers maintained production, African mineral sands producer Base Resources said in its quarterly report.
The decline in global pigment demand was less than anticipated for most of the quarter. UK-based producer Venator was able to increase prices in March and April and said average pricing was stable in the second quarter compared with the first quarter and year on year.
The US imports almost all of the titanium it consumes after the closure of Australian mineral sands producer Iluka's operation in Virginia in 2016, US-based metal producer ATI's titanium sponge plant in Utah in 2016 and US-based titanium sponge producer Timet's plant in Nevada in August this year.
Timet said last year that the Nevada plant would no longer be viable without intervention from the government to introduce tariffs on imports from Japan under section 232 of the Trade Expansion Act.
The Trump administration declined to introduce tariffs, instead directing the US Defence and Commerce departments to negotiate measures with Japan to secure access to titanium sponge. With the closure of the Nevada plant, Timet revised its long-term purchase agreement with Japanese producer Toho Titanium to increase its imports of sponge.
Projects anticipate government support for critical supply
While TiO2 demand has held up, sales so far this year have been lower than in 2019.
Demand for sponge is likely to remain under pressure as the aerospace sector faces a difficult environment following the Covid-19 outbreak.
Airline orders for new planes have slumped and the world's largest titanium producer — Russia's VSMPO-AVISMA — expects its orders to remain under pressure until the end of 2021.
But Tao Commodities is looking ahead to government stimulus spending for infrastructure and defence in the wake of the pandemic to boost titanium demand internationally. This will emphasise the need to re-establish a US production base, the company said.
Titanium is on the US government's list of 35 critical minerals owing to its use in aerospace and defence. Titanium sponge is difficult to store for long periods as its quality degrades, making stockpiling unsuitable for military and aerospace applications.
The US Geological Survey and the Association of American State Geologists have awarded $100,000 in funding for critical minerals projects in Florida, including grants to the Florida Geological Survey for surveys focusing on the potential for producing rare earths and titanium.
Canadian mining exploration company Temas Resources has acquired an iron, titanium and vanadium resource in Quebec. It cited the Canada-US Joint Action Plan on Critical Minerals Collaboration to secure supply chains as the reason for its investment, anticipating demand from the US for its output. The US strategy includes accessing critical minerals through investment and trade with allies including Canada.
Related news posts
FeCr quarterly benchmark not fit for Asia: Jindal
FeCr quarterly benchmark not fit for Asia: Jindal
Mumbai, 12 September (Argus) — The ferrochrome industry has entered a new era after the quarterly benchmark system ended in June 2024 and the industry is seeking a new pricing mechanism to replace the benchmark system that had been criticised for many years . Argus spoke with Indian producer Jindal Stainless' managing director Abhyuday Jindal about what the future pricing mechanism should look like and the challenges Indian stainless steelmakers face from lower-priced Chinese imports and increased volatility in raw material costs. How are you pricing ferrochrome without a quarterly benchmark, and what future pricing mechanisms do you foresee? Even during the regime of quarterly benchmark prices, countries such as India and China were not influenced by this benchmark. Instead, they set ferro chrome prices based on realistic demand and supply. They negotiated prices close to the actual consumption. Even European consumers had been buying chrome at discounted levels than the benchmark levels because it was unrealistic. In the future, we expect the Asian model based on realistic demand and supply will continue to succeed. How has cheaper Chinese stainless steel imports impacted the margins of domestic steelmakers? Imports from China have posed a long-standing challenge to the industry. While other major stainless steel producing nations have imposed duties on Chinese imports, India has yet to take similar actions. As one of the largest and fastest-growing markets for stainless steel, India becomes a key target for dumped and subsidised imports. Continuous dumping from China puts immense pressure on MSMEs and disrupts the local manufacturing ecosystem. Additionally, it creates an uneven playing field for domestic manufacturers, often forcing many to shift from manufacturing to trading. What is the outlook for ferrochrome prices and how will this affect production costs and demand? Recently, raw material prices for stainless steel had been volatile owing to availability concerns of raw material ore. Nickel, one of the major input materials, has displayed unpredictability on the London Metals Exchange (LME) in the range of $15,000-21,000/t and now currently is around $16,000/t. Some of this volatility was driven by Ni ore prices in Indonesia. Similarly, chrome ore shortages are impacting ferrochrome availability and prices. In India, the majority of chrome ore resources are available from only two companies, of which only one has been consistent with supplies. This is the reason why we have had to resort to imports for meeting chrome requirements. By Deepika Singh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
S Korean plate sales into EU revive AD probe talks
S Korean plate sales into EU revive AD probe talks
London, 11 September (Argus) — A recent spree of South Korean hot-rolled plate (HRP) sales into Europe have revived talks around the possibility of a dumping probe. Over the first six months of 2024 South Korean plate arrivals into Europe rose by a third compared with the same period last year to 330,000t. Last week, South Korea offered S275 grades at €540-550/t cfr south EU concluding a string of deals in the process, likely at the figures indicated above. These prices have put local producers under pressure to reduce their own offers despite significant cost pressures. When comparing southern European prices to South Korean imports an arbitrage of about €90/t is available on domestic offers. At the time of writing, local prices in Italy for S275 grades have settled at €650-680/t ex-works. One mill source told Argus it has already filed a complaint to the relevant authorities over dumping activity from Asia. "It makes sense to investigate India and Indonesia, combined with Korea. These are the three most aggressive sources right now," the same market participant said. This investigation follows protectionist trends and should include South Korea, Indonesia and India, one trader added. Similar views were echoed in Italy, where two sources commented any investigation should begin promptly, given the damage imports have caused. A probe launched by the EU would likely put UK authorities under pressure to enact a similar measure. "The UK has to act in the same way as EU. Korean prices cannot continue," one mill agent said. Aggressive importation, especially from Asia, has also hampered cash-strapped Liberty Steel's re-rolling facility in Scotland. Sources close to the company told Argus the reroller remains off the market, and has furloughed part of its workforce. "Structural challenges in the UK steel industry, including consistently high energy costs and cut-price imports from countries such as South Korea with less stringent environmental standards, means Liberty Steel UK has for some time been operating some plants intermittently with agreed short-time working arrangements," Liberty said. UK Steel, which represents UK steelmakers, noted "concern" about "underpriced" Korean plate imports, though it said it has not submitted a petition as of yet. By Carlo Da Cas Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US inflation slows to 2.5pc in August
US inflation slows to 2.5pc in August
Houston, 11 September (Argus) — US inflation slowed in August to the lowest rate since February 2021, marking a fifth month of easing inflationary pressures and paving the way for a widely expected cut in the Federal Reserve's target rate next week. The consumer price index (CPI) slowed to an annual 2.5pc in August from 2.9pc in July, the Bureau of Labor Statistics reported today. So-called core inflation, which strips out volatile food and energy prices, rose by 3.2pc in August, matching the July reading, largely due to an uptick in monthly shelter costs. After the report, the CME's FedWatch tool signaled an 83pc probability that the Fed will cut its target rate by a quarter point at next week's Fed policy meeting from 66pc odds Tuesday. Probabilities of a half point cut fell to 17pc from 34pc the prior day. The energy index contracted by an annual 4pc in August, following a 1.1pc gain in July, while the gasoline index contracted by 10.3pc in August, accelerating from a 2.2pc decline in July. Energy services eased to an annual gain of 3.1pc following gains of 4.2pc in July. Food costs rose by 2.1pc in August, slowing from a 2.2pc gain in July. Shelter rose by 5.2pc after a 5.1pc gain in July. Transportation services rose by 7.9pc in August, slowing from 8.8pc in July. Headline CPI rose by 0.2pc in August from the prior month, matching July's monthly gain. Core CPI accelerated a tick to 0.3pc in August following a monthly 0.2pc gain in July, largely as shelter rose to 0.5pc from a prior 0.4pc and transportation services surged to a 0.9pc monthly gain from 0.4pc. After falling to 3.1pc in January, inflation reaccelerated to as high as 3.5pc in March, prompting the Federal Reserve to hold off on widely expected rate cuts after holding its target rate at 23-year highs since July 2023 to contain inflation, which surged as high as 9.1pc in June 2022. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
UK metals industry calls for political stability
UK metals industry calls for political stability
London, 11 September (Argus) — Industry leaders and public servants have called on the new UK government to provide much-needed stability for the metals industry today at the UK Metals Expo, after years of an "inconsistent" approach under the previous government. Attendees at the event in Birmingham, England, heard that the new government is expected to "hit the ground running" after years in opposition, with a clear manifesto commitment to industrial strategy. "We've seen a lot of disruption, first from Brexit and then from the Covid-19 pandemic," said Seamus Nevin, chief economist and director of MAKE UK, the UK's manufacturers association. "There have been 15 different ministers in charge of industrial policy over the years and six different revisions of government strategy. The amount of churn and change has been very disruptive, you can't run a company like that. Following the last general election, we now have a new government which committed from day one to a new industrial strategy, with manufacturing at the forefront of their plans." Nevin pointed to new policies by the Labour government which he expects, if successful, to help the metals and manufacturing industry gain a more stable footing after years of instability. These include a new nationalised energy company, the removal of barriers to onshore wind power and the creation of a new statutory body, the Industrial Strategy Council (ISC), which will oversee future governments' policies in a similar way to the UK Office for Budget Responsibility (OBR). "This new government is going to take a far more interventionist approach to industrial strategy than the previous one," said Timothy Stock, head of green industrial strategy at the Department for Energy, Security and Net Zero. "We need be more clear-eyed about sectors which have growth opportunities and capitalise on where the UK has strengths. Taking a long-term view is vital." Long-term view crucial to competitiveness A more steady government with a strong mandate will need to set out long-term strategic goals for the UK's industries, which are crucial for international competitiveness, attendees heard, with personnel stability key to ensuring this. "During the chaos of the last years of the last government, things did slow down," Stock said. "Things like having the same minister in charge at the secretary of state position for the whole five years of the government is an internal aim of theirs and one that I think is really valuable to build that knowledge base and consistency." He added that the ability to take new ideas and commercialise them in the UK is also important, but this relies on "clear and visible" government policies. In the past, research and development undertaken in the UK has been picked up and commercialised in other countries such as the US and Germany. "The transition to net zero is going to be heavily reliant on our foundation industries like metals. We can look at examples in the past where we've been successful, like deploying offshore wind turbines, where we haven't really seen the benefits in domestic manufacturing," said Stock. "As we drive towards net zero, this new government is cognisant of getting the benefits in terms of manufacturing, onshoring the manufacturing of these materials and parts and not just relying on imports. So building out those supply chains is a high priority." Other panellists agreed that onshoring is part of the overall plan, especially with protectionism in metal-adjacent industries spreading around the world. Phillippa Oldham, stakeholder engagement manager at the UK Advanced Propulsion Centre (APC), pointed to new rules around electric vehicles that mean domestic manufacturing must be a priority for the Labour government. "The automotive sector is worth £80bn in revenue to the UK," she said. "The supply chain is the thing that is so critical here. There are things like EU rules of origin coming into force in the UK market, so we need to figure out how to localise those supply chains and make them circular here in the UK." By Thomas Kavanagh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more