Latest market news

Weak electronics sector weighs on metal demand

  • : Metals
  • 23/11/08

Low demand for consumer electronics is weighing on demand for components such as semiconductors, capacitors and touch screens, as well as the metals used to produce them.

Demand for consumer electronics has slumped this year as a weak macro-economic picture and high inflation has squeezed consumer spending, and this slump has fed back up the supply chain to weigh on demand for electronic components and the minor metals used to produce them.

In its financial year ending in September, Apple's net product sales dropped by just over 6pc on the year to $298bn. Apple's product sales decreased in the first, second and third quarters, recovering a little in the fourth quarter with the release of a new range of iPhones. But fourth-quarter sales still fell by about 5pc from a year earlier to $67.2bn.

Sales by South Korea's Samsung Electronics' "Device Experience" (DX) division — which includes smartphones, televisions, tablets and wearables, as well as larger devices such as refrigerators and air conditioning units — declined by 10.5pc year on year in the first three quarters of 2023 to 126.5 trillion won ($97.4bn).

This extended period of lower consumer electronics demand and the uncertainty about when demand will improve has resulted in lower sales for component makers and a bearish outlook for electronic metal markets.

Taiwanese electronic component maker Hon Hai (Foxconn) reported that its revenues fell by 7.2pc year on year between January and October.

And revenues at the Taiwan Semiconductor Manufacturing (TSMC) decreased by just over 11pc year on year to $49.68bn in January-September. TSMC is the largest global producer of semiconductor chips, and while its revenues have been supported by the ramp-up of its advanced 3 nanometer technology, this was offset by customer inventory adjustments, the company said.

US-based glass manufacturer Corning, which produces the durable glass used by Apple for its iPhones and other touch-screen products, increased the net sales of its display division by about 5pc in January-September this year, compared with 2022, following price increases. But the company noted lower sales volumes in the first and third quarters and that customers were moving from a pandemic-style "just in case" model back to a "just in time" model.

Touch-screen displays are a major downstream sector for indium metal as glass touch screens are coated with an indium-tin-oxide thin film. Indium prices increased globally in the second quarter following speculation that the metal could be included under new Chinese export restrictions. But this speculation was unfounded, and prices have since started to trend lower as a result of low spot-buying demand and ample stocks among consumers. Argus last assessed prices for 99.99pc indium metal at $260-300/kg duty unpaid Rotterdam, down by about 5pc in the past three weeks.

Tantalum prices also have come under significant downward pressure as a result of low downstream demand from the electronics industry this year. Tantalum is used in the capacitors of many portable electronic devices, as well as in the production of some semiconductor logic chips and memory chips.

Prices for tantalite, the raw material used to produce tantalum metal and oxide powders, have averaged $84.82-87.40/lb cif main port so far this year, down from an average of $96.92-101.43/lb through 2022, and are currently on a sharp downtrend as many consumers have pulled back from the spot market entirely because of poor downstream demand and uncertainty about when demand may rebound.

Bismuth prices also are trending lower. Argus last assessed prices lower for 99.99pc bismuth metal at $3.90-4.15/lb duty unpaid Rotterdam on 7 November, down from the 2023 peak of $4.20-4.60/lb in May-June. Bismuth often is used as solder to join electronic components together inside computers, mobile phones and televisions.

One of the few exceptions for the downtrend trend is gallium metal. The Chinese government introduced export controls on gallium products, used in advanced compound semiconductor technologies, from August this year, restricting the availability of the metal in Europe and lifting prices to a 13-month high of $450-475/kg cif main airport in October. But prices in China now have started to trend downwards as a result of slow demand from domestic gallium consumers and a lack of exports. Argus last assessed domestic Chinese prices for gallium metal at 2,100-2,300 yuan/kg ex-works, down from Yn2,300-2,500/kg on 31 October.

Looking ahead, metal market participants and consumer electronics producers expect demand to remain muted until at least the second half of next year.

"Markets are reflecting lower prices owing to softer demand," a minor metals trader said. "I feel that all minor metals will drift downwards for this next month or two unless strong demand is coming from China, which is also unlikely."

"Based on current inventories we do not expect to enter the spot market earlier than the second half of 2024," a western tantalum consumer said. "Tendency more on 2025."


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/11/01

Striking Boeing workers to vote on new proposal

Striking Boeing workers to vote on new proposal

Houston, 1 November (Argus) — Boeing workers next week will vote on a third labor proposal from the aerospace manufacturer that could end a seven-week work stoppage that has halted production of several commercial aircraft programs. More than 32,000 Boeing employees represented by the International Association of Machinists and Aerospace Workers (IAMAW) will cast their ballots on 4 November after union leadership and the company struck a tentative agreement on Thursday. The new offer comes with a 38pc general wage increase (GWI) spread over four years and a $12,000 ratification bonus — both up from 35pc and $7,000, respectively, from Boeing's previous proposal that workers rejected on 24 October. Sticking points during contract negotiations have centered around pay raises, with workers seeking a 40pc GWI, and the reinstatement of employees' pension plans. The latter is not addressed in the company's latest offer. Boeing's machinists have been on strike since 13 September, putting a squeeze on the company's finances with output of its flagship 737 MAX aircraft stalled. Production of Boeing's 767 and 777 models also has been disrupted. If the deal is approved, the earliest workers could return to their jobs would be 6 November, with everybody having to be back by 12 November at the latest, the union said. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US job growth slumps in October, jobless rate at 4.1pc


24/11/01
24/11/01

US job growth slumps in October, jobless rate at 4.1pc

Houston, 1 November (Argus) — The US added only 12,000 nonfarm jobs in October, reflecting the impacts of two hurricanes, a strike at aircraft manufacturer Boeing and a slowing trend in hiring prompted by high borrowing costs. The unemployment rate remained unchanged at 4.1pc, still close to a five-decade low of 3.4pc reached in early 2023, the Labor Department reported today. Last month's gains were far fewer than the 113,000 forecast by analysts surveyed by Trading Economics. Job gains for the prior two months were revised down by a combined 112,000 jobs, leaving September with a still robust 233,000 and August with 78,000 jobs. A Labor Department report earlier this week showed job openings in September were at their lowest since January 2021. Still, job gains for the 12 months through October averaged 194,000, a little higher than the 12-month period before Covid-19 struck the US beginning in early 2020, causing millions of job losses and a sharp but short recession. Today's employment report, the last before next week's US presidential election, cements odds of a quarter point cut in the Federal Reserve's target rate next week to nearly 100pc from about 96pc Thursday, according to CME's FedWatch tool. The Fed cut its rate by half a point in late September, the first cut since 2020, as it is just beginning to loosen monetary policy after the sharpest tightening in decades to battle surging price gains. Inflation has since moved close to its 2pc target and job gains have gradually slowed, even as the economy remains robust, growing by nearly 3pc in the second and third quarters of the year. Hurricane Helene made landfall in northern Florida in late September and slammed northwards into Georgia, the Carolinas and Virginia, leaving major damage in its wake. Hurricane Milton struck Florida on 9 October, within the period of both surveys used for the job report. About 32,000 unionized workers at Boeing have been on strike since early September. Job growth trended up in government and in health care and social services, which added 40,000 and 51,000, respectively, while manufacturing declined by 46,000, partly due to strikes. Construction added 8,000 jobs. Average hourly earnings edged up to an annual 4pc from 3.9pc. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

First northwest European HRC options trade on CME


24/10/31
24/10/31

First northwest European HRC options trade on CME

London, 31 October (Argus) — Options contracts settled against the Argus northwest European hot-rolled coil (HRC) index traded today for the first time since their launch on the CME Group exchange more than two years ago. An option on the northwest European HRC contract on CME (EHR) traded today at a premium of €20/t for the right to buy a strip for the first quarter of 2025 (50 lots or 1,000t of January, February and March) at €700/t. Options are a financial contract offering the right, but not the obligation, to buy or sell an underlying asset — in this case the EHR futures contract — for a specific price at a specific point in time. The right to buy is called a call option; the right to sell a put option. The buyer pays a premium to have this right, which is typically used to protect against an adverse market move. The Argus northwest European HRC index stood at €558.75/t on Wednesday, while the January-March futures contracts are currently trading at about €620/t, putting the call option above the current spot market price and forward curve for the contracts in question. Market participants suggested the trade could be part of a ‘short collar' strategy, in which someone who is ‘long' on the underlying futures contract (trading on anticipation of an upwards move) buys a put option (the right to sell at an agreed price) to protect their long position for a premium, but then sells a call option to receive a higher premium to offset the cost of the put. CME Group launched the EHR futures contract in March 2020. Since then more than 3.6mn t of steel futures have traded, with more than 1mn t this year alone. Open interest — a measure of liquidity measuring the volume of open contracts — currently stands at a record high of more than 230,000t. Options were added in May 2022. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Codelco Cu output recovers in 3Q


24/10/31
24/10/31

Codelco Cu output recovers in 3Q

London, 31 October (Argus) — Chilean state-owned Codelco's copper output fell on the year in January-September, but rose in the third quarter. January-September production fell by 5pc to 918,000t. Chief executive Ruben Alvarado attributed this to a fatal accident in March at the Radomiro Tomic unit that halted operations for over a month, as well as delayed start-up at the Rajo Inca unit. Despite declining ore levels at some key deposits, third-quarter copper production was up by 1.5pc on the year, at 338,000t. Adjusted January-September earnings before interest, tax, depreciation and amortisation increased by 21pc on the year to $4bn, reflecting higher copper prices. The company expects production from the Andes Norte expansion at its El Teniente unit to start in the first quarter of 2025, while the Andesita project should come on line in the next few months. Rajo Inca should be on stream before the year's end. By Roxana Lazar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Amag’s earnings up in 3Q but down in year so far


24/10/31
24/10/31

Amag’s earnings up in 3Q but down in year so far

London, 31 October (Argus) — Austrian aluminium producer Amag posted higher revenues and earnings on the year in the third quarter, but both fell in the first nine months of the year amid challenging market conditions. Amag's earnings before interest, taxes, depreciation and amortisation (Ebitda) rose by 8.3pc on the year to €52.2mn ($56.6mn) in the third quarter of this year, while Ebitda over the first nine months of the year fell 11.1pc to €147.6mn. Revenues climbed 7.1pc on the year to €370.9mn in July-September, on shipment volumes that rose by 2.4pc on the year to 109,100t. Revenues reached €1.079bn in the first nine months of this year, down 5.6pc from the previous year, and shipments fell 1.3pc to 323,300t over that period. "With the economic situation in many European countries remaining subdued, we have so far succeeded in generating solid earnings through product mix shifts and a high degree of flexibility," chief executive Dr Helmut Kaufmann said. "Nevertheless, the weak industrial economy in Europe is leading to increasing pressure on prices and volumes in numerous industries." Amag confirmed its Ebitda target for 2024 at €160-180mn. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more