Latest market news

Autoworkers approve GM labor contract

  • : Metals, Petrochemicals
  • 23/11/16

Members of the United Auto Workers (UAW) union have approved a new contract with General Motors (GM), marking the first of the Big 3 US automakers to secure a contract and capping a dramatic two months that included six weeks of strikes against the company.

The vote at GM, with all locals reporting, was 54.7pc voting for the contract, the tightest margin seen in voting of the three companies so far.

Many of GM's largest plants, including its Flint, Michigan, and Fort Wayne, Indiana, full-size pickup truck plants, and the Wentzville, Missouri, midsize pickup truck plant, voted against the deal but will still have to abide by the terms.

At Ford so far 66.7pc of workers have voted to approve the deal with 10 sites still needing to vote, including the large Dearborn, Michigan, stamping, truck and engine plants. Although there are more than 10,000 union members left to vote at Ford, all would need to vote no to deny the agreement, according to an Argus analysis of the current vote tallies. The lowest margin of approval at a large Ford plant was 42.8pc voting for the agreement at the Louisville, Kentucky, truck plant, one of three Ford sites that has voted the contract down so far.

At Stellantis, workers have voted 66.5pc in favor of the contract, with seven sites left to vote. The vote margin for the contract is 5,722, with at least 15,400 members left to cast their votes.

The union struck at plants at Ford, GM and Stellantis beginning 15 September, lasting for six weeks. The union targeted all three companies at the same time for the first time in its history.

The strategy won pay increases that were more than double the companies' initial offers, with union members gaining 25pc increases over the life of the contract, a restoration of cost-of-living adjustments that had been lost during the 2008/2009 financial crisis, and other concessions.

The gains made by the UAW have filtered to non-unionized automakers in the US. Japanese automaker Toyota said it would raise wages at its US plants by an undisclosed amount in 2024, while Honda said it would increase pay by 11pc beginning in January.

Hyundai is increasing wages for employees at its two US plants by 25pc between 2024-2028, matching the pay increase the UAW secured.


Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/11/20

ArcelorMittal could close two service centres in France

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Graphjet launches Malaysian biomass-to-graphite plant


24/11/20
24/11/20

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan, Peru sign deal to enhance copper supply chain


24/11/19
24/11/19

Japan, Peru sign deal to enhance copper supply chain

Tokyo, 19 November (Argus) — The Japanese and Peruvian governments have signed a strategic partnership to bolster the copper supply chain, with a comprehensive road map to promote bilateral business opportunities for natural resources. This agreement came as Japan accelerates efforts to secure copper supplies, while Peru is a key global copper supplier. The two countries rolled out a comprehensive road map for enhancing political and economic relationships on 17 November. This includes organising an annual bilateral meeting for mining and energy investment as well as conducting joint research on efficient mining operations, such as removal of impurities from copper ores, according to the road map. Unlike conventional initial agreements that are typically signed without a specific closing date, the Japanese-Peruvian road map has set a 10-year timeline that will end by 2033. This seems to reflect Japan's sense of urgency in securing base metal supply including copper. "Japan would like to continue to co-operate with Peru to strengthen the resilience of the supply chain of mineral resources such as copper", said Japanese prime minister Shigeru Ishiba in Peru on 17 November. Japan's current strategic energy plan that was revised in 2021 aims to lift base metal self-sufficiency to 80pc by 2030, up by around 30 percentage points from the 2018 level. But the strategy appears to not be on track, the country's ministry of trade and industry Meti reiterated in late October without disclosing the current rate. Japan appears to be especially concerned about copper supply. Meti forecasts global copper demand to double to around 50mn t in 2035 following the global electrification of applications including electric vehicles, while there will likely be a 10mn t/yr supply shortage. The country's domestic copper ingot demand is forecast to exceed 1.4mn t by 2030, according to Meti, up by 400,000 t from the 2022 level. This is partially attributed to the adoption of more artificial intelligence, it added. Japan is making efforts to diversify copper supply sources, given the deterioration in quality of copper supplied by the world's biggest producer Chile, Meti said. Peru and Argentina are prominent suppliers in the region, according to Meti, adding that Japanese government support is essential for acquiring stakes in upstream operations in those countries, given their higher risks. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Neste to supply renewable chemical feedstock to PCS


24/11/18
24/11/18

Neste to supply renewable chemical feedstock to PCS

London, 18 November (Argus) — Finland's Neste will supply Singapore-based chemicals company PCS with renewable material feedstock for production of plastics. The Neste RE material will be supplied to PCS for use at a site on Jurong Island, Singapore. Neste RE is based on waste products including used cooking oil (UCO) or waste residues from vegetable oil processing. PCS produces ethylene, propylene and butadiene for consumers across Asia-Pacific. The first deliveries from PCS will include butadiene, the company said. Initial buyers include Mitsubishi, Toray Plastics in Malaysia and Synthomer. Neste previously said beverage maker Suntory will produce PET bottles derived from bio-paraxylene converted from bio-naphtha by the Finnish refiner. By George Barsted Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Hong Kong unveils green maritime fuel action plan


24/11/18
24/11/18

Hong Kong unveils green maritime fuel action plan

Shanghai, 18 November (Argus) — The Hong Kong special administrative region government unveiled a green maritime fuel action plan on 15 November, aimed at making the region a top-tier centre for green fuel bunkering and reducing carbon emissions from the port of Hong Kong. According to the Action Plan on Green Maritime Fuel Bunkering, Hong Kong aims to curb carbon emissions in line with the International Maritime Organization (IMO), which targets 20% emissions reduction in international shipping by 2030 and a 70% reduction by 2040, compared with 2008 levels, before achieving net-zero emissions by or around 2050. The plan also targets to reduce carbon emissions from Hong Kong-registered ships by at least 11pc, compared with 2019 levels, and have 55pc of diesel-fuelled vessels in the government fleet switch to green maritime fuels by 2026. Hong Kong will target lower carbon emissions from the Kwai Tsing Container Terminals by 30pc, compared with 2021, and ensure that 7pc of its registered ships use green maritime fuels by 2030. Separately, the plan outlines that Hong Kong will have completed the development of the Code of Practice (CoP) on liquefied natural gas (LNG) and green methanol bunkering by 2025. The government will also invite industry expressions of interest by end-2025 for the conversion of a land parcel near the port in Tsing Yi South for green maritime fuel storage. Hong Kong is expected to achieve an annual sale of over 200,000t of green marine fuels by 2030, with over 60 LNG or green methanol bunkering services for ocean-going vessels a year, according to the plan. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more