Nippon Steel to invest $1.3bn more in US Steel's mills
Japan's largest steel firm Nippon Steel is planning to make additional $1.3bn investment in US Steel's facilities in a move seen as an attempt to gain the support of US labour unions for the pending acquistion of the US company.
Nippon Steel announced on 29 August plans to invest no less than $1bn to upgrade US Steel's facility at Mon Valley Works and around $300mn for Gray Works, on top of its $15bn acquisition offer.
The investment is widely seen to be an effort to gain support of the United Steelworkers (USW) union and US politicians who are against the deal.
Critics are concerned partly because possible consolidations following the acquisition could jeopardise US Steel workers' employment. Nippon Steel has reiterated that the current collective bargaining agreement between US Steel and its employees will not be affected by the deal.
The company also mentioned plans for technological transfer to US Steel, including efforts to reduce environmental footprint and extend the longevity of other facilities, hinting at potential further investments that could expand employment opportunities.
But USW's president David McCall is sceptical, saying "a press release is not a contract" and said Nippon Steel is continuing to avoid the union's input despite acknowledging one of the union's ongoing concerns.
It remains uncertain whether the $15bn deal will be completed as Nippon Steel expects. The Japanese company has already in May extended the scheduled timing of the acquisition completion until the end of the year, following a request by US authorities for more documentation. This postponed the original plan to close the deal by September at the latest.
The new $1.3bn investment will be contingent upon the successful completion of the acquisition, Nippon Steel said.
Related news posts
US OCTG, line pipe imports fall in July
US OCTG, line pipe imports fall in July
Houston, 29 August (Argus) — Preliminary data from the US Department of Commerce shows that imports of oil country tubular goods (OCTG) and line pipe products fell in July. OCTG volumes fell by 88,100 metric tonnes (t) from the prior year, as volumes from Japan dropped by 15,500t, South Korea and Thailand both dropped by 13,500t, and volumes from Vietnam and Mexico fell by 11,300t and 9,300t, respectively. Volumes of line pipe less than or equal to 16in fell by 12,300t, as Italian volumes dropped by 4,500t, Ukraine dropped to zero from 4,400t in the prior year, and Brazilian volumes fell by 3,100t. Standard pipe imports increased by 13,400t on a 7,900t increase from Turkey. Heavy structural shape volumes jumped by 39,700t as Spanish volumes increased by 21,700t from the prior year, and imports from Germany rose by 9,200t. By Rye Druzchetta US pipe and tube imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 OCTG 95,792 183,909 -88,117 -47.9% 126,760 Line pipe 69,387 80,875 -11,488 -14.2% 87,976 Standard 66,100 52,716 13,384 25.4% 76,317 Heavy Structural Shapes 107,979 68,253 39,726 58.2% 54,096 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Line pipe is all diameters. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Higher flats volumes lead US steel imports up
Higher flats volumes lead US steel imports up
Houston, 29 August (Argus) — Higher volumes of flat steel imports led overall US steel imports higher in July. Total US steel imports for consumption were 2.2mn metric tonnes (t) in July, according to preliminary data from the US Department of Commerce. Hot-rolled coil (HRC) imports rose by 22,600t from the prior year, driven by a 32,900t jump in Japanese volumes, which were offset slightly by a 9,200t drop from Canada. Cold-rolled coil (CRC) volumes were up by 37,000t in July, with Canada exporting 8,800t more than the prior year. Hot-dipped galvanized (HDG) coil imports from Brazil jumped by 17,200t from the prior year, while volumes from Mexico rose by 13,000t. Volumes of blooms, billets and slabs dropped by 121,900t, as Mexico's volumes dropped to zero from 95,800t in the prior year. By Rye Druzchetta US steel imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 HRC 156,952 134,326 22,626 16.8% 156,861 CRC 172,746 135,778 36,968 27.2% 113,400 HDG 233,511 165,607 67,904 41.0% 238,809 Blooms, billets, slabs 364,138 486,053 -121,915 -25.1% 395,478 Total (all items)* 2,197,347 2,153,126 44,221 2.1% 1,955,800 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
ThyssenKrupp Steel executives leave as tensions rise
ThyssenKrupp Steel executives leave as tensions rise
London, 29 August (Argus) — Seven board and supervisory board members of ThyssenKrupp Steel Europe have left their positions given deepening strife with the chief executive of parent company ThyssenKrupp. There has been an ongoing dispute between ThyssenKrupp chief executive Miguel Lopez and board members of ThyssenKrupp Steel Europe, including the latter's chief executive Bernhard Osburg, for some months now over the future of the business. Osburg and two other board members from Steel Europe have now stepped down, as has the chairman of the Steel Europe supervisory board Sigmar Gabriel and three other supervisory board members. The members have "lost all confidence in the will and ability of the chairman of the executive board of ThyssenKrupp AG to co-operate appropriately", Gabriel said in a note after a meeting today. He said Lopez has carried out an "unprecedented" and public campaign against the executive board of Steel Europe, damaging its ability to act and breaching trust. The Steel Europe board had proposed a plan to align the business' production to its recent shipments, meaning a decline from about 12mn t/yr to 9mn t/yr, and to exit from steelmaker HKM's joint venture with Salzgitter and Vallourec. HKM is viewed as a high-cost slab producer. However, Lopez felt the plans did not go far enough to restructure the business, calling for a deeper reorganisation and reduction in headcount. A spokesperson for union IG Metall said it "strongly" supports Osburg and the outgoing chairman, and criticises the actions of Lopez. The union is not legally allowed to call for strike action, but has called for protests over the departures. One executive said the dispute could threaten the future of Steel Europe as an entity. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
India's Sail starts trialling biochar for steelmaking
India's Sail starts trialling biochar for steelmaking
Mumbai, 29 August (Argus) — India's state-controlled Steel Authority of India (Sail) has started using biochar for steelmaking at its plant in Odisha state to bring down carbon emissions. Sail carried out a trial injection of biochar in blast furnace (BF) 1 of its Rourkela Steel Plant on 24 August, the steelmaker said. Biochar — produced by thermally decomposing biomass derived from plants and animals — can partially replace pulverised coal injection in BFs, Sail said. The company did not provide any specific timelines. Steelmakers in India are largely reliant on traditional BF technology, which uses coal as a reducing agent to produce iron and releases vast amounts of carbon in the process. Coal-based BFs account for 73pc of India's total operating iron-making capacity, according to data from Global Energy Monitor. There has also been a global push towards finding alternatives to fossil fuels in steelmaking, as countries commit to achieving net zero emissions. In recent days, at least four Japanese steelmakers have tested the use of biocarbon — widely known as biochar — as a replacement for fossil fuels in their electric arc furnaces. In July, Tata Steel also tested the use of biomass as a feedstock at its ferro-chrome unit in east India's Odisha state. Sail's Rourkela plant has a crude steel capacity of 4.2mn t/yr and produces hot-rolled and coil-rolled steel as well as some long products. The company's total crude steel production fell by 7pc to 4.68mn t in April-June, compared with the previous quarter. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
![](/_next/image?url=%2F-%2Fmedia%2Fproject%2Fargusmedia%2Fmainsite%2Fimages%2F14-generic-hero-banners%2Fherobanner_1600x530_generic-c.jpg%3Fh%3D530%26iar%3D0%26w%3D1600%26rev%3D-1%26hash%3DFC2BEDE406483FEF5FDB9549159BAC11&w=3840&q=75)
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more