Cliffs Middletown EAF hinges on EV growth

: Metals
22/04/22

Integrated steelmaker Cleveland-Cliffs will build a new electrical steel-oriented electric arc furnace (EAF) at its Middletown, Ohio, integrated mill if US electrical vehicle (EV) production materializes.

Chief executive Lourenco Goncalves said his company is producing electrical steel at maximum capacity, and that a future EAF at Middletown would be built to meet growing EV motor demand.

"Let's see how many of my clients will be really doing what they are saying they are going to do with electric vehicles," Goncalves said in an earnings call. "If they are very successful, all of them, and we need a lot more non-oriented electrical steels to supply the engines of electric vehicles, then the electric arc furnace will materialize."

Cleveland-Cliffs filed an air permit for a new EAF at its Middletown mill in early April.

US EV production capacity is expected to surpass 2mn vehicles annually by 2025 and approach 3mn annually by 2028. The US produced nearly 1mn full EVs in 2021, according to automakers. Legacy US automakers all plan to shift production to EVs, with General Motors to be 100pc EV by 2035 and Ford eying 50pc EV by 2030.

Cleveland-Cliffs and integrated competitor US Steel are the two US steelmakers who are able to melt and produce electrical steel grades, which are used in EV motors.

If electrical vehicle production begins to meet expectations "we are going to be the first ones to jump in," Goncalves said.

For 2022, the steelmaker increased its price expectations by $200/short ton to $1,445/st on higher fixed price contracts, higher steel futures levels, and widening spreads between hot rolled coil (HRC) and cold rolled coil (CRC). The Argus US HRC Midwest ex-works assessment has been flat at $1,500/st for three weeks, and CRC has a $400/st premium to HRC.

Cleveland-Cliffs' automotive sales volumes in the first quarter rose by 200,000st from the fourth quarter, marking the best quarter of automotive shipments since the beginning of semiconductor shortages in early 2021. The company expects sales volumes to continue to increase on a quarterly basis.

Cleveland-Cliffs' steel product sales totaled 3.64mn st in the first quarter, down by 12pc from a year earlier. Of that amount, 34pc was hot-dipped galvanized (HDG) coil, a quarter was HRC, 18pc was CRC and 6pc was plate. The remainder was stainless and electrical, slabs and rail products.

The average selling price jumped to $1,446/st, up by 61pc from a year earlier.

Cleveland-Cliffs boost its first-quarter profit to $801mn from $41mn a year earlier.

By Rye Druzin

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/11/25

US’ Peabody to buy Anglo’s Australian met coal assets

Singapore, 25 November (Argus) — US coal producer Peabody Energy has agreed to acquire the bulk of coking coal assets that UK-South African mining firm Anglo American is seeking to divest as it exits the coal sector. Peabody plans to buy Anglo's majority stakes, at up to $3.8bn, in four metallurgical coal mines — Moranbah North, Grosvenor, Aquila and Capcoal — located in Australia's Bowen Basin, with the transaction expected to close by mid-2025 and subject to customary closing conditions, the producer said in a statement. With the acquisition of coal mines, Peabody's combined US-Australia production will rise from 10.6mn short tons/yr at present, to an estimate of 11.3mn st/yr (10.25mn t) by 2026, according to Peabody, strengthening the producer's position in the premium hard coking coal (PHCC) market. Moranbah North, Grosvenor and Aquila are PHCC mines, while Capcoal produces a combination of PHCC, pulverised coal injection (PCI) and other coal grades. At present, Australian low volatile hard coking coal, or tier-2 coking coal, accounts for 55pc of Peabody's 7.4mn st in coking coal sales, but the acquisition of new assets will bring PHCC's share up to 51pc and reduce its tier 2 coal to 24pc. Peabody also produces high volatile A coal in the US, accounting for 12pc of sales this year. In addition to the sale of assets to Peabody, Anglo has agreed to sell the Dawson mine in Central Queensland to Indonesian mining company PT Bukit Makmur Mandiri Utama (BUMA) for $455mn. Earlier this month, Anglo agreed the sale of its 33pc share of the [Jellinbah Group coking coal joint venture]https://direct.argusmedia.com/newsandanalysis/article/2624965) to partner Australia-based Zashvin at $A1.6bn ($1.04bn). In May, Anglo announced plans to exit its coal, platinum, nickel and diamond businesses shortly after rejecting repeated takeover bids from Australian resources firm BHP. These deals come against a backdrop of a challenging price environment for steel making and subsequent weakness in coking coal prices, implying tight margins for coal producers. After reaching a high of $336.50/t fob Australia, the premium low volatile coking coal fell steadily throughout this year to reach $176.50/t in September, before recovering to remain in the $201-208/t range for most of November. In addition to a less than friendly investment climate for coal projects, Australia's Queensland state and New South Wales (NSW) state governments increased royalties on coal sales in 2023 and 2024 respectively, putting further strain on Australian miners already facing inflationary pressure from wages, equipment and fuel costs. Lower coking coal prices this year have translated to reduced royalty payments, but have yet to stem the tide of consolidations and asset sales as mining companies exit the sector. In August, Australia-based diversified metals producer South32 completed the sale of its Illawarra coking coal operations in NSW to an entity owned by Singapore-based Golden Energy and Resources (Gear) and Australia's M Resources for $1.65bn. In the US, rising mining costs and weak seaborne prices for most of this year led to the closure of smaller high-cost operations and mergers such as that of Arch Resources and Consol Energy to form Core Natural Resources , expected to close by the first quarter of 2025. In July, trading firm Glencore completed its acquisition of a majority stake in Elk Valley Resources, the coking coal division of Canadian mining firm Teck Resources, growing the former's thermal and coking coal production to 130mn t/yr. By Siew Hua Seah Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US alleges Nippon dumped HRC at higher rates

24/11/21

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Recent deep-sea and short-sea cfr Turkey scrap deals

24/11/21

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output drops further in October

24/11/21

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ArcelorMittal could close two service centres in France

24/11/20

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more