Latest market news

Graphite firms integrate European battery supply chain

  • : Agriculture, Metals
  • 20/09/24

Graphite mining firms are developing an integrated supply chain in Europe, in response to rising demand from electric vehicle (EV) manufacturers and EU concerns about critical mineral supply.

Much of the focus in the EV market remains on the lithium supply chain, but graphite is also significant for battery production. Historically, around 70pc has been mined in China, and close to 100pc of the anode precursor material used in lithium-ion batteries is processed there. China became a net importer of graphite in 2019, with the opening of Australia-based Syrah Resources' Balama mine in Mozambique in the second half of the year.

Natural graphite is produced in China and Africa at lower cost with higher energy capacity for batteries, while synthetic graphite produced elsewhere has higher production costs and lower capacity, but a longer cycle life. Producers of EV materials tend to use a blend of the two. Flake concentrate is processed into 99.95pc high-purity spherical graphite and fines suitable for battery manufacturing.

As EV sales continue to accelerate outside China, the world's largest market, demand for graphite supply outside of China is also increasing. The production of 1GWh of lithium-ion battery capacity requires 400t of graphite. Global natural graphite production amounts to around 750,000 t/yr, according to mine developer Northern Graphite, while long-term demand is expected to exceed supply. Chinese state-owned metals trading firm MinMetals forecasts a large natural graphite deficit in 2025.

Graphite mining developers are looking to reduce reliance on China, building plants in Europe to integrate the supply chain from mining through to anode production. Automotive manufacturers prefer to have suppliers in geographical proximity to meet just-in-time deliveries, which is driving the construction of large-scale lithium-ion EV battery plants in Europe. Locating anode plants in Europe further localises the supply chain.

The EU kept graphite on a critical raw materials list updated earlier this month, reflecting its importance in EV battery production. The EU imports 98pc of the graphite it uses, with 47pc imported from China, compared with a combined 10pc from Norway and Romania.

Europe's EV registrations approached 400,000 in January-June, up by 61.5pc on the year, data from the European Automobile Manufacturers' Association (ACEA) show, while petrol and diesel car registrations dropped by more than 45pc.

Plans to add 557 GWh/yr of battery manufacturing capacity in Europe by 2024 will require an additional 450,000 t/yr of anode material, according to Australia-based mining company Mineral Commodities.

Mineral Commodities is building an active anode material plant in Norway to supply European battery plants. The facility will initially produce 10,000 t/yr of coated spherical graphite and fines from flake supplied by its Skaland mine in Norway from 2023. It plans to add two 20,000 t/yr modules to process concentrate from its Munglinup mine in Australia when it begins output in 2024.

The plant will operate an alternative process to the typical hydrofluoric acid purification used in graphite refining, which has deterred production outside China because of its environmental impact.

Australia-based Talga Resources, which is focused on European graphite projects, is building a 19,000 t/yr coated anode plant in Sweden to supply the European EV manufacturing chain from 2023. The plant will process flake from the company's Vittangi mine in Sweden, which will produce 22,000 t/yr from 2021. Talga has revised up its resource estimate in response to increasing demand for graphite in batteries, with Europe the fastest-growing market, the company said.

Norwegian silicon and carbon producer Elkem is building a pilot plant to produce anode materials that is scheduled for completion in early 2021. The pilot will evaluate the viability of its large-scale plant project, Northern Recharge.

Graphite producers outside Europe are also targeting the market. Syrah Resources is assessing the feasibility of producing 10,000 t/yr of anode material at its plant in the US and scaling up to 40,000 t/yr. Syrah cites Europe as well as the US in its plans to provide an alternative to the Asian supply chain.

Australia-based EcoGraf is planning to become fully integrated, with its Epanko graphite mine in Tanzania due to produce 60,000 t/yr of flake, and an anode plant in Australia planned to start production at 5,000 t/yr, scaling up to 20,000 t/yr by 2022. EcoGraf said it is positioning to respond to the investment in European battery capacity, with the EU having committed €3.2bn to support supply chain development.

EcoGraf has qualified high-purity fines with European customers and signed a 10-year agreement with Germany's Thyssenkrupp Materials Trading. The agreement covers the sale of 50pc of planned output of purified spherical graphite and by-product fines from the plant. In the longer term, EcoGraf plans additional processing facilities in Europe and North America.

Demand for graphite anode material t

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

24/11/22

Blenders credit extension stalled in US Senate

Blenders credit extension stalled in US Senate

New York, 22 November (Argus) — A push for US lawmakers to extend various biofuel incentives before the end of the year has met resistance in the Senate. A growing coalition of biofuel and soybean groups has endorsed extending for one year a $1/USG federal tax credit for blenders of biomass-based diesel, which would otherwise expire after December and be replaced by the Inflation Reduction Act's carbon-intensity-based "45Z" credit. But lawmakers have various other priorities in the final weeks of this legislative session, and a staffer with the Democratic-controlled US Senate Finance Committee confirmed that prospects for a deal to extend biofuel tax credits are slim. "Republicans have showed very little interest in working with Democrats on much of anything related to tax," said Ryan Carey, chief communications advisor and deputy policy director at the Committee on Finance. "Their focus is primarily on the next Congress, when they're going to attempt to pass an extension of the first Trump tax law on a partisan basis." Another Senate office acknowledged on background that it is "unlikely" Congress will come to any major tax deal before the end of the year. Congress has other priorities for its brief lame duck session before president-elect Donald Trump begins his second term, including government funding, the federal debt limit, and a new farm bill. Tax policy could still fit into an end-of-year package, with some less controversial tax provisions and a bipartisan business tax proposal backed by Senate Finance Committee chair Ron Wyden (D-Oregon) still under discussion. But prolonging the biodiesel blenders credit — plus other biofuel credits benefiting sustainable aviation fuel and cellulosic fuels that some groups have also pushed to extend — appears to be a tougher lift. With Trump in the White House and Republicans set to control both chambers of Congress, Republicans are now preparing major tax policy legislation next year to prolong tax cuts passed during Trump's first term that are set to expire at the end of 2025. Lawmakers are likely to look at repealing some Inflation Reduction Act clean energy subsidies to help offset the cost of that proposal. Republicans on the House tax-writing committee this week requested public input on the 45Z credit specifically, a signal that they are at least open to modifications — and are already looking to tax policy next year. Biofuel subsidies are seen by analysts and lobbyists as less likely targets for repeal than other Inflation Reduction Act credits, given support for the industry among farm state lawmakers. But the request-for-information this week suggested that Republicans are wary of elements of the current 45Z credit and could support changes that benefit agribusiness. Even biofuel groups generally supportive of the 45Z credit's structure have been frustrated by President Joe Biden's administration, which has yet to issue guidance clarifying how it will calculate the carbon intensities of different fuels and feedstocks. By Cole Martin Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

US alleges Nippon dumped HRC at higher rates


24/11/21
24/11/21

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Recent deep-sea and short-sea cfr Turkey scrap deals


24/11/21
24/11/21

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Japan’s crude steel output drops further in October


24/11/21
24/11/21

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

ArcelorMittal could close two service centres in France


24/11/20
24/11/20

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more