Latest market news

European battery revolution starts now: VDMA

  • Market: Metals
  • 01/07/20

The EU battery industry is estimated to add an extra 500GWh of capacity by 2030 and leapfrogging the US to become the second-largest regional producer of batteries.

"Essentially, the party for batteries is starting in Europe now," Mechanical Engineering Industry Association (VDMA) chairman Joachim Döhner said.

Global battery capacity is estimated to reach 1,200 GWh by 2030, up from 300GWh this year, according to estimates by Al Pack Group, presented at the virtual VDMA conference on 30 June.

Europe will see the largest gain in market share, increasing to 13.6pc in 2030 from 6.6pc in 2020. Europe is expected to grow faster than all other regions in 2020-25, VDMA estimates, while China will likely dominate the market at 63.1pc of total capacity in 2030 but fall from 73.7pc this year.

The US is expected to grow slightly, to 11pc, from 10.2pc this year. South Korea and Japan, which make up 6.4pc and 3.1pc of global supply, respectively, are expected to reduce their market shares to 2.8pc and 1.7pc by 2030.

Playing catch-up

Currently, no single, large European company is leading the battery industry.

Large battery-producing companies this year are South Korea's LG Chem, which accounted for 12.3pc of battery deliveries last year, Chinese firms CATL and BYD, at 32.5pc and 11.1pc, respectively, and Japanese firm Panasonic, which delivered 28.1pc of shipped battery cells last year, according to VDMA. The rest of the market was split between various smaller producers in Asia-Pacific and the US.

But this is set to change.

Several large projects are likely to open in Europe in the coming years. Northvolt, a Swedish battery maker, is expected to open two plants, one in Salzgitter, Germany, with a final capacity of 24GWh by 2024, and another in Skelleftea, Sweden, with capacity of 40GWh by 2021.

PSA, the French carmaker, plans to open a 64GWh plant split between France and Germany by 2022 and Norwegian battery producer Freyr will open a plant in the north of Norway with capacity of 32GWh by 2023.

Asia-Pacific companies are also investing in the European battery supply chain. LG Chem already has a pilot plant in Wroclaw, Poland, with capacity of 15GWh, which could increase to 65GWh later. The leading battery maker in China and the world, CATL, has plans for a 100GWh plant in Erfurt, Germany.

Much of the activity will centre around Germany. Seven of the 17 largest projects announced in Europe will be in Germany. Of the remainder, two will be in the UK, one in France, three in Scandinavia and four in eastern Europe. There are more projects planned but these are the largest in Europe.

As carmakers return from Covid-19-related lockdowns, there is a growing emphasis on a "green" recovery in Europe. The €750bn EU recovery plan placed special emphasis on ecologically driven growth after the viral outbreak. Several countries in the region have also announced national packages to support the battery market.

France has allocated about €8bn to carmakers, including an increase in subsidies for electric vehicles (EVs) to €7,000 from €6,000. In Germany, an incentive programme aimed at lower-priced EVs is set to benefit sales of the new VW ID3, which is the carmaker's flagship EV hatchback. Outside of the EU, the UK government expanded on a £1bn package of support for battery makers and outlined plans to open the UK's first giga-factory, although it provided no specific details.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
25/09/24

Tight supply remains Europe Al driver

Tight supply remains Europe Al driver

London, 25 September (Argus) — European aluminium markets have barely stirred following the slow summer months, as demand in the automotive and construction markets continues to disappoint and sales opportunities for traders and distributors remain sparse even after the holiday period definitively ended. But premiums have remained steady throughout September, as tight supply remains the main driver of the European aluminium market, even more so than earlier in the year, when premiums were climbing amid moderate demand. European aluminium premiums rose by two-thirds over the first five months of the year, with the Argus assessment of the P1020 duty-paid spot in-warehouse Rotterdam premium hitting an 18-month high of $320-350/t in May. Demand, although unimpressive compared with stronger years, increased sufficiently to tip the market balance against tight supply. Availability in Europe was severely limited by low production following sizeable cuts over the previous two years, the absence of Russian metal owing to self-sanctioning by consumers and official sanctions by governments in the UK and US, and aggressive Chinese importing from most international regions. Premiums subsequently edged back slightly to $320-340/t and then began an unprecedented run of flatness over the June-August summer period, as demand fell away in Europe but the sustained tight supply environment stopped premiums from falling back. Throughout the slow summer months, there was a sense that premiums were primed to race higher as soon as demand picked up in the autumn, led by automotive markets that were expected to at least show some improvement after slowing from the middle of the year. But that has not happened, and premiums have continued to flatline at $320-430/t in September, as demand has failed to stir in either the automotive or construction sectors. Europe's largest economy Germany has seen particular weakness in its consumer industries, with the construction sector having been in decline throughout this decade, while major carmaker Volkswagen recently told its employees that it is considering closing some factories. In July, Germany's manufacturing output index hit its lowest since June 2020, according to climate and economy ministry BMWK, with total industrial production down by 2.4pc from June this year and 5.3pc lower than in July 2023. "There has been no bounce-back from the end of the summer. Stockists and distributors still have empty inboxes, which is very unusual for this time of year," one analyst said. "The automotive market is bad and the construction market is terrible." But premiums have not budged against such a bleak demand picture, as supply remains very tight even against that stark lack of buying. The factors that reduced availability in Europe over the past few years remain very much in play, while China's appetite for imports has grown even stronger this year. China's primary aluminium imports in the year to August rose by more than 50pc on the year to 2.58mn t, customs data show. That trend is likely to continue, as domestic Chinese aluminium production is bumping up against the country's output cap of 45mn t/yr. Some had expected earlier this year that China could raise the cap but few are of that view now, especially given the damage done this year to the country's steel industry by excess production. Additionally, most provinces have now mandated efficiency targets. The best way to achieve them is to limit energy use, and aluminium smelters are one of the biggest energy users. "The Chinese production cap is key, and China is within a few hundred thousand tonnes of it already," a second analyst said. "They don't even need to see better demand to keep increasing imports." Tightness in the alumina market will feed through to the smelting industry, limiting output further. UK-Australian mining firm Rio Tinto's alumina output fell by 10pc on the quarter and the year to 1.68mn t in the second quarter, following an incident at its third party-operated Queensland gas pipeline in March, while record Chinese aluminium production this year has also drained alumina supplies. There is little in the way of imports flowing to Europe from other regions. Freight costs remain high, and suppliers in the Middle East and India are showing little inclination to bear the cost of deliveries to Europe without greater price and premium incentives. Consequently, the European market will remain very tight in the fourth quarter, leaving it susceptible to any stirring of demand that could cause premiums to jump. But there seems little chance of any such demand growth until 2025, with few suppliers even reporting discussions for further activity this year. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

EU steelmakers lobby for US Section 232-style tariff


25/09/24
News
25/09/24

EU steelmakers lobby for US Section 232-style tariff

London, 25 September (Argus) — EU steelmakers are lobbying for emergency restrictions on imports in light of continuing market penetration, according to numerous sources. European steel association Eurofer has met with the European Commission to discuss high imports, at a time when weak demand is already putting pressure on local steel prices. Multiple sources suggest it is lobbying for a tariff similar to the US' Section 232, which applies a blanket tax on all finished steel imports. "The commission of course is aware of the concerns of the sector, it's a sector with which we have a strong ongoing contact and dialogue. Any new trade defence cases are looked at on a case by case basis on their own merits," a commission spokesperson told Argus in Brussels on Tuesday. The commission understands the concerns of mills, but at the same time has to balance the interest of steel users, sources suggest. Imports to the EU's hot-rolled coil (HRC) market have increased dramatically since China started ramping up exports in the third quarter of last year. Imports since July 2023 have constituted around 25pc of all EU market supply when safeguard quotas reset at the start of each quarter, up from 11-15pc in the previous months. Imports rose to a record 1.56mn t in July, and would have been even higher if not for 175,000t being pulled back from clearance to avoid additional tariff rate quota duties. The EU imported 6.2mn t of HRC in January-July, the highest on record, despite tightened safeguards. The share of imports in overall supply is higher on cold-rolled coil and hot-dip galvanised (HDG), where the impact of comparatively higher energy costs is even more problematic for local mills. Steelmaking sources suggest that the existing safeguard is not fit for purpose as a result, and they also question the ability of importers to hold back supply to avoid duties. But others suggest the impact of the existing 15pc other countries cap and continuing dumping investigation has not been felt yet, and that these measures will help tighten the market when demand strengthens. Vietnam is a major source of HDG supply to the EU and sources expect this could be the next dumping case, especially given the country's high usage of Chinese HRC. By Colin Richardson and Dafydd ab Iago Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

India's HRC importers hit by falling steel prices


25/09/24
News
25/09/24

India's HRC importers hit by falling steel prices

Mumbai, 25 September (Argus) — Indian importers of hot-rolled coil (HRC) have suffered large losses in the last three months as bets on a demand recovery failed and domestic prices fell to over three-year lows. HRC prices in India's domestic market have fallen by around 13pc between mid-May and mid-September, forcing some importers to sell at a loss. A slowdown in construction activity during the monsoon season, reduced government funding for infrastructure projects and heightened pressure from lower-priced seaborne shipments have combined to send domestic HRC prices to their lowest level since 2020. Importers were paying landed costs of 50,000-51,000 rupees/t ($598-610/t) for HRC when bookings were made in May, at a time when domestic steel prices were increasing. But prices had fallen back down by the time those cargoes started arriving in July, leaving importers facing losses. The Argus weekly Indian domestic HRC assessment for 2.5-4mm material was last assessed at Rs47,400/t ex-Mumbai on 20 September, down by 13pc compared to mid-May when prices were assessed at Rs54,200/t. Imported HRC is now being offered at Rs46,000/t, about 10pc lower than its landed cost, a Mumbai-based trader said. Expectations of an uptick in demand following India's national elections in June failed to materialise. Some market participants then forecast that prices would recover in September on the back of a post-monsoon rebound in construction activity. Prices instead kept falling as the government did not release funding for building projects as had been expected, while the availability of cheaper imports and rising domestic production created excess supply. "The thinking was that even if we faced losses in the beginning, we would be able to cover them later when prices rose. But the price decline has continued," a Chennai-based HRC importer said. "Currently, there is no risk appetite left among importers. We have sold out whatever we imported and now we are buying from other importers," he said. The steel unit of NMDC, India's state-owned iron ore mining firm, has also started selling HRC recently. This has added to the pressure on domestic prices by increasing supply, market participants said. HRC offers from overseas sellers to India have also fallen in recent months, in line with the downturn in domestic demand and sluggish Chinese markets. Importers booked volumes from Vietnamese steelmaker Formosa Ha Tinh for $590-595/t cfr India in May, but levels fell to $565-570/t in July and indicative bids were at $530-540/t cfr in August. Buyers booked Chinese HRC for around $560/t cfr in late April, while the latest bookings were at $490-495/t cfr India. Support from duties New import offers have all but dried up recently given increased discussions that anti-dumping (AD) duties could be imposed on Vietnamese HRC, and that tariffs could be raised on imports from China, market participants said. India launched an AD probe into Vietnamese imports in August, while the steel ministry has backed raising tariffs on Chinese imports to 10-12pc from current levels of 7.5pc. Import restrictions could provide some support to prices, which have been falling with no signs of bottoming out. But there has been no official communication on AD duties yet, which has soured steel market sentiment further. Some market participants expect domestic HRC prices to fall to Rs45,000/t soon. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan, Vietnam, Taiwan to bust EU HRC quota


24/09/24
News
24/09/24

Japan, Vietnam, Taiwan to bust EU HRC quota

London, 24 September (Argus) — Japan, Vietnam and Taiwan's hot-rolled coil (HRC) exports are likely to exhaust their 141,850t safeguard duty-free allowance under the EU's ‘other countries' quota on 1 October. Japan exported nearly 250,000t of HRC in June-July to the EU, Global Trade Tracker data show, with an estimated 39,000t pulled-back from customs clearance in July, according to Argus calculations . Volumes at EU ports from Japan could be more than double the quota volume. Similarly, Vietnam exported over 80,000t in June-July, where at least 65,000t was left over from the previous quota period, which brings the total to slightly above the quota. There could be more Vietnamese material that had not been presented to customs in July, and early August exports could also arrive in time for October clearance. These Vietnamese and Japanese coils are all expected to be put forward for clearance on 1 October, as importers look to avoid the risk of potential retroactive anti-dumping duties, which could be collectable as early as 8 December. Taiwan is also on track to exhaust its quota, with exports to the EU in June-July totalling nearly 150,000t, with a further almost 45,000t estimated to have been pulled back from customs in July. But the pull-back mechanism might still be used for Taiwanese material in October, and not every tonne is likely to be cleared, because Taiwan is not subject to a dumping investigation, so importers could choose to wait until January to clear their material. Data from Egypt are not available yet, but Argus calculated that almost 27,000t were pulled back in July. Egypt benefits from shorter transit times, so could continue selling to the bloc even in October-November without risk of incurring duty. Export data further show that over 280,000t was exported from Brazil to the EU in June-August and over 70,000t from China. The EU has imported record amounts of HRC in the first seven months of this year, despite current safeguard measures. Over 6.2mn t was imported in January-July, around 400,000t more than the same period of last year. In 2021 — currently the record year for EU HRC imports at 9.2mn t — only 5.6mn t was imported over the same period. European steel producers' association Eurofer is lobbying for further restrictions on imports, after the implementation of the 15pc cap on sellers into the other countries quota, and the start of a dumping investigation against Egypt, Japan, India and Vietnam. By Lora Stoyanova and Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

BMW, Redwood partner on Li-ion battery recycling


23/09/24
News
23/09/24

BMW, Redwood partner on Li-ion battery recycling

Houston, 23 September (Argus) — US-based battery recycler Redwood Materials will recycle lithium-ion batteries from electric vehicles (EV) in automaking conglomerate BMW Group's portfolio under a partnership with the group's US subsidiary. The deal, announced Monday, will give Redwood access to more than 700 BMW Group locations to source end-of-life batteries, including dealerships, distribution centers and internal facilities, the recycler said. Redwood touted its proximity to BMW's Spartanburg and Woodruff manufacturing plants in South Carolina, where one of the company's two campuses is located, in saying the two companies have "committed to establishing significant operations in the area." BMW plans to produce at least six EV models in the US by 2030, spending $1bn to retrofit Spartanburg to manufacture electric SUVs by 2026. Woodruff will supply Spartanburg with batteries as the company's new $700mn battery assembly plant that is expected to be operational by 2026. The collaboration with BMW adds to Redwood's push to partner with other auto and battery manufacturers in recent years. The company in May entered into a deal with Ultium, the joint venture between General Motors and LG Chem, to recycle its production waste from two facilities that it estimates produce a combined 10,000 metric tonnes (t)/yr of cathode and anode scrap. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more