US Steel to take October outage at Mon Valley

Market: Coking coal, Metals
26/04/22

Integrated steelmaker US Steel in October will take a scheduled blast furnace outage at its Mon Valley Works mill in Pennsylvania.

The 21 day maintenance outage will impact Mon Valley's 1.4mn short tons (st)/yr No. 3 blast furnace and could take at least 81,000st of hot metal production off the market.

The blast furnace is one of two at the mill. The 1.5mn st/yr No. 1 blast furnace underwent a 25 day outage in May 2021.

The late-year outage will come as other mills ramp up production. Electric arc furnace (EAF) steelmaker Steel Dynamics (SDI) expects its new 3mn st/yr flat rolled mill in Sinton, Texas, will ramp to 80pc capacity by the end of the third quarter, or 6,600st/day, and to hit 90pc capacity by the end of the year, which would equal 7,400st/day of production.

EAF steelmaker Nucor is expecting the 1.4mn st/yr expansion at its 1.6mn st/yr Gallatin, Kentucky, flat-rolled mill to be fully operational in the third quarter, adding an additional 3,800st/day of production capacity.

In April 2021, US Steel canceled its plans to invest $1bn in new endless casting and rolling facilities at the Mon Valley mill. The company has decided to invest $3bn to build a 3mn st/yr flat rolled electric arc furnace (EAF) steel mill in Arkansas adjacent to its 3.3mn st/yr Big River Steel EAF mill. The company will also spend $60mn to build a pig iron caster at its Gary Works steel mill in Indiana to supply metallics to Big River Steel.

By Rye Druzin

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

01/11/24

Striking Boeing workers to vote on new proposal

Houston, 1 November (Argus) — Boeing workers next week will vote on a third labor proposal from the aerospace manufacturer that could end a seven-week work stoppage that has halted production of several commercial aircraft programs. More than 32,000 Boeing employees represented by the International Association of Machinists and Aerospace Workers (IAMAW) will cast their ballots on 4 November after union leadership and the company struck a tentative agreement on Thursday. The new offer comes with a 38pc general wage increase (GWI) spread over four years and a $12,000 ratification bonus — both up from 35pc and $7,000, respectively, from Boeing's previous proposal that workers rejected on 24 October. Sticking points during contract negotiations have centered around pay raises, with workers seeking a 40pc GWI, and the reinstatement of employees' pension plans. The latter is not addressed in the company's latest offer. Boeing's machinists have been on strike since 13 September, putting a squeeze on the company's finances with output of its flagship 737 MAX aircraft stalled. Production of Boeing's 767 and 777 models also has been disrupted. If the deal is approved, the earliest workers could return to their jobs would be 6 November, with everybody having to be back by 12 November at the latest, the union said. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more

News

US job growth slumps in October, jobless rate at 4.1pc

01/11/24

News

01/11/24

US job growth slumps in October, jobless rate at 4.1pc

Houston, 1 November (Argus) — The US added only 12,000 nonfarm jobs in October, reflecting the impacts of two hurricanes, a strike at aircraft manufacturer Boeing and a slowing trend in hiring prompted by high borrowing costs. The unemployment rate remained unchanged at 4.1pc, still close to a five-decade low of 3.4pc reached in early 2023, the Labor Department reported today. Last month's gains were far fewer than the 113,000 forecast by analysts surveyed by Trading Economics. Job gains for the prior two months were revised down by a combined 112,000 jobs, leaving September with a still robust 233,000 and August with 78,000 jobs. A Labor Department report earlier this week showed job openings in September were at their lowest since January 2021. Still, job gains for the 12 months through October averaged 194,000, a little higher than the 12-month period before Covid-19 struck the US beginning in early 2020, causing millions of job losses and a sharp but short recession. Today's employment report, the last before next week's US presidential election, cements odds of a quarter point cut in the Federal Reserve's target rate next week to nearly 100pc from about 96pc Thursday, according to CME's FedWatch tool. The Fed cut its rate by half a point in late September, the first cut since 2020, as it is just beginning to loosen monetary policy after the sharpest tightening in decades to battle surging price gains. Inflation has since moved close to its 2pc target and job gains have gradually slowed, even as the economy remains robust, growing by nearly 3pc in the second and third quarters of the year. Hurricane Helene made landfall in northern Florida in late September and slammed northwards into Georgia, the Carolinas and Virginia, leaving major damage in its wake. Hurricane Milton struck Florida on 9 October, within the period of both surveys used for the job report. About 32,000 unionized workers at Boeing have been on strike since early September. Job growth trended up in government and in health care and social services, which added 40,000 and 51,000, respectively, while manufacturing declined by 46,000, partly due to strikes. Construction added 8,000 jobs. Average hourly earnings edged up to an annual 4pc from 3.9pc. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

First northwest European HRC options trade on CME

31/10/24

News

31/10/24

First northwest European HRC options trade on CME

London, 31 October (Argus) — Options contracts settled against the Argus northwest European hot-rolled coil (HRC) index traded today for the first time since their launch on the CME Group exchange more than two years ago. An option on the northwest European HRC contract on CME (EHR) traded today at a premium of €20/t for the right to buy a strip for the first quarter of 2025 (50 lots or 1,000t of January, February and March) at €700/t. Options are a financial contract offering the right, but not the obligation, to buy or sell an underlying asset — in this case the EHR futures contract — for a specific price at a specific point in time. The right to buy is called a call option; the right to sell a put option. The buyer pays a premium to have this right, which is typically used to protect against an adverse market move. The Argus northwest European HRC index stood at €558.75/t on Wednesday, while the January-March futures contracts are currently trading at about €620/t, putting the call option above the current spot market price and forward curve for the contracts in question. Market participants suggested the trade could be part of a ‘short collar' strategy, in which someone who is ‘long' on the underlying futures contract (trading on anticipation of an upwards move) buys a put option (the right to sell at an agreed price) to protect their long position for a premium, but then sells a call option to receive a higher premium to offset the cost of the put. CME Group launched the EHR futures contract in March 2020. Since then more than 3.6mn t of steel futures have traded, with more than 1mn t this year alone. Open interest — a measure of liquidity measuring the volume of open contracts — currently stands at a record high of more than 230,000t. Options were added in May 2022. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Codelco Cu output recovers in 3Q

31/10/24

News

31/10/24

Codelco Cu output recovers in 3Q

London, 31 October (Argus) — Chilean state-owned Codelco's copper output fell on the year in January-September, but rose in the third quarter. January-September production fell by 5pc to 918,000t. Chief executive Ruben Alvarado attributed this to a fatal accident in March at the Radomiro Tomic unit that halted operations for over a month, as well as delayed start-up at the Rajo Inca unit. Despite declining ore levels at some key deposits, third-quarter copper production was up by 1.5pc on the year, at 338,000t. Adjusted January-September earnings before interest, tax, depreciation and amortisation increased by 21pc on the year to $4bn, reflecting higher copper prices. The company expects production from the Andes Norte expansion at its El Teniente unit to start in the first quarter of 2025, while the Andesita project should come on line in the next few months. Rajo Inca should be on stream before the year's end. By Roxana Lazar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Amag’s earnings up in 3Q but down in year so far

31/10/24

News

31/10/24

Amag’s earnings up in 3Q but down in year so far

London, 31 October (Argus) — Austrian aluminium producer Amag posted higher revenues and earnings on the year in the third quarter, but both fell in the first nine months of the year amid challenging market conditions. Amag's earnings before interest, taxes, depreciation and amortisation (Ebitda) rose by 8.3pc on the year to €52.2mn ($56.6mn) in the third quarter of this year, while Ebitda over the first nine months of the year fell 11.1pc to €147.6mn. Revenues climbed 7.1pc on the year to €370.9mn in July-September, on shipment volumes that rose by 2.4pc on the year to 109,100t. Revenues reached €1.079bn in the first nine months of this year, down 5.6pc from the previous year, and shipments fell 1.3pc to 323,300t over that period. "With the economic situation in many European countries remaining subdued, we have so far succeeded in generating solid earnings through product mix shifts and a high degree of flexibility," chief executive Dr Helmut Kaufmann said. "Nevertheless, the weak industrial economy in Europe is leading to increasing pressure on prices and volumes in numerous industries." Amag confirmed its Ebitda target for 2024 at €160-180mn. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more