US HRC: Prices flat, market sees lower offers

Market: Metals
25/10/22

US hot rolled coil (HRC) prices were flat this week as the market continued to search for direction.

The Argus weekly domestic US HRC Midwest assessment slipped by $1.25/short ton (st) to $736.25/st, while the southern assessment fell by $3.75/st to the same level.

HRC lead times in the Midwest were flat at 3-4 weeks.

Most offers were reported between $700-760/st, with sales reported at $760/st.

Integrated steelmaker Cleveland-Cliffs' chief executive Lourenco Goncalves said this morning that his company will aim for quarterly production rates of 3.9mn-4mn st, an increase of 8-11pc compared to the first three quarters of 2022, which averaged around 3.6mn st. The increased production is supposed to be consumed by improved automotive demand, which rose by 100,000st between the second and third quarters.

It's unclear how the market will react to more flat production, which will come as oversupply remains a top issue and additional flat-rolled production will be ramping up in the next six months.

In its earnings last week, electric arc furnace (EAF) steelmaker Nucor said its mills, which comprise the largest steelmaking footprint in the country, produced at a 77pc utilization rate in the third quarter. EAF competitor Steel Dynamics said it ran at 93pc utilization rate during the same period.

The market continues to wait on results of negotiations between integrated steelmaker US Steel and the USW for a new contract to replace the one that expired on 1 September. Many cite a potential strike as the only action that could turn around the market, save increased production cuts by steelmakers.

US Steel has already take offline two blast furnaces in response to market conditions. No other steelmaker has followed suit.

The Argus HRC import assessment into Houston increased by $15/st to $700/st ddp on limited import offers.

The spread between #1 busheling scrap delivered US Midwest mills and HRC edged down by $2/st to $422/st.

A year ago the spread was $1,414/st as HRC prices were hovering near record-high levels and beginning to decline.

The Argus weekly domestic US cold-rolled coil (CRC) assessment plunged by $77.50/st to $930/st, as prices continued to correct downward while the hot dipped galvanized (HDG) coil assessment dropped by $63.50/st to $924.50/st.

Lead times for CRC were flat at 6 weeks, while HDG lead times increased to 6 weeks from 5-6 weeks.

The CME HRC Midwest futures market was down in the last week, with the futures prices tightening to a $40/st range through May. December prices fell by $21/st to $705/st, while January prices dropped by $34/st to $706/st. February prices fell by $20/st to $720/st, and March prices declined by $24/st to $731/st. April prices fell by $25/st to $740/st, while May prices dropped by $30/st to $745/st.

Plate

The Argus weekly domestic US ex-works plate assessment was down slightly by $2.50/st to $1,617.50/st.

Lead times were flat at 4 weeks.

The plate delivered assessment edged up by $1/st to $1,661/st.

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

01/04/25

Next US tariffs to take effect 'immediately'

Washington, 1 April (Argus) — President Donald Trump plans to announce a sweeping batch of tariffs on Wednesday afternoon that will take effect "immediately", the White House said today. Trump will unveil his much anticipated tariff decision Wednesday at 4pm ET during a ceremony at the White House Rose Garden. While the administration has announced the effective date, there is little clarity on what goods will face tariffs at what rates and against which countries, leaving the government agencies that will be tasked with enforcing new tariffs largely in the dark. "The president has a brilliant team of advisers who have been studying these issues for decades, and we are focused on restoring the golden age of America and making America a manufacturing superpower," the White House said today, brushing off criticism from economists, industry groups and investors. Economic activity in the US manufacturing sector contracted in March as businesses braced for Trump's tariff threats. Trump has previewed or announced multiple tariff actions since taking office. The barriers in place now include a 20pc tariff on all imports from China, in effect since 4 March, and a 25pc tax on all imported steel and aluminum, in effect since 12 March. A 25pc tariff on all imported cars, trucks and auto parts, is scheduled to go into effect on 3 April, the White House confirmed today. Trump and his advisers have previewed two possible courses of action for 2 April. Trump has suggested that all major US trading partners are likely to see a broad increase in tariffs in an effort to reduce the US trade deficit and to raise more revenue for the US federal budget. But Trump separately has talked about the need for "reciprocal tariffs", contending that most foreign countries typically charge higher rates of tariffs on US exports than the US applies to imports from those countries. In that scenario, high tariffs become a negotiating tool to bring down alleged foreign barriers to US exports. Treasury secretary Scott Bessent told Fox News on Monday night that the second course is the one Trump is more likely to take. Trump will announce "reciprocal tariffs" and "everyone will have the opportunity to lower their tariffs, lower their non-tariff barriers, stop the currency manipulation" and "make the global trading system fair for American workers again", Bessent said. But the White House insisted today that the new tariffs will not be a negotiating tool. Trump is "always up for a good negotiation, but he is very much focused on fixing the wrongs of the past and showing that American workers have a fair shake", the White House said. Trump's words and actions already have drawn retaliatory tariffs from Canada and China, and the EU is preparing to implement its first batch of counter-tariffs in April. Trump, for now, has deferred his tariff plans for imported Canadian and Mexican oil and other energy commodities. But the US oil and gas sector, which depends on pipelines and foreign-flagged vessels to transport its crude, natural gas, refined products and LNG, will feel the effects of tariffs on imported steel and proposed fees on Chinese-made and owned vessels calling at US ports. By Haik Gugarats Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more

News

Mexico GDP outlook falls again in March survey

01/04/25

News

01/04/25

Mexico GDP outlook falls again in March survey

Mexico City, 1 April (Argus) — Private-sector analysts lowered Mexico's 2025 GDP growth forecast to 0.5pc in the central bank's March survey, down by more than a third from the prior forecast, driven by increased concerns over US trade policy and weakening domestic investment. The latest outlook is down from 0.8pc estimated in February and marks the largest of four consecutive reductions in the median forecast for 2025 GDP growth in the central bank's monthly surveys since December. Mexico's economy decelerated in the fourth quarter of 2024 to an annualized rate of 0.5pc from 1.7pc the previous quarter, the slowest expansion since the first quarter of 2021, according to statistics agency data. Uncertainty over US trade policy has weighed on investment and contributed to the slowdown. Concerns have intensified in recent weeks with US president Donald Trump set to announce sweeping new tariffs on 2 April. Mexico is preparing its response, possibly including reciprocal tariffs, on 3 April. A key concern in Mexico is an expiring carveout to the tariffs for treaties aligned with US-Mexico-Canada (USMCA) free trade agreement rules of origin. Mexico's economy minister said last week ongoing negotiations aim to secure a "preferential tariff," including a continuance of that exclusion and lower tariffs for goods progressing toward USMCA compliance. The median 2026 GDP growth estimate fell to 1.6pc from 1.7pc in February. Analysts again cited security, governance and trade policy as top constraints to growth. Year-end 2025 inflation expectations edged lower to 3.70pc in March from 3.71pc in February. The central bank's board of governors cut Mexico's target interest rate by 50 basis points to 9pc from 9.5pc on 27 March, citing expectations that inflation will continue to slow toward the central bank's 3pc long-term goal and reach 3.3pc by year-end. The board said it would consider additional cuts of that size at future meetings. Mexico's consumer price index accelerated to an annual 3.77pc in February, as slower growth in agricultural prices was offset by faster inflation in services. The target interest rate is projected to fall to 8pc by year-end, compared with 8.25pc in February's survey. The median exchange rate forecast for end-2025 reflected expectations of the peso ending the year slightly stronger at Ps20.80 to the US dollar from Ps20.85/$1 estimated in the prior forecast. The end-2026 estimate firmed slightly to Ps21.30/$1 from Ps21.36/$1. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Mexican peso weakness may partially offset US tariffs

01/04/25

News

01/04/25

Mexican peso weakness may partially offset US tariffs

Mexico City, 1 April (Argus) — Volatility in the peso/dollar exchange rate may help to partially offset any tariffs that US President Donald Trump decides to impose on imports from Mexico as the ensuing peso depreciation would make its exports more competitive, said analysts from US bank Barclays. President Trump will announce Wednesday his next decision related to the threat to impose a 25pc tariff against imports from its commercial partners Mexico and Canada. Trump has delayed the decision twice, and it is likely that he will do so again, given the serious repercussions the tariffs could cause to the US economy, said Latam chief economist at Barclays, Gabriel Casillas, during a webinar held Monday. The base scenario for Barclays is that Trump's administration will finally step back from imposing tariffs on Mexico and Canada and rather go for an early renegotiation of the (US Mexico Canada Free Trade Agreement (USMCA) this year, said Casillas. In this scenario, the Mexican peso would strengthen to between Ps19.5 to Ps19.00 to the greenback, he added. However, if Trump's administration decides to impose the 25pc tariffs on all Mexican imports as he has threatened to do, then the peso would weaken to Ps24/$1, said Erik Martinez, foreign exchange research Analyst at Barclays during the same webinar. "If tariffs were imposed, 25 percent on all imports, we think a good portion of this would be absorbed by the exchange rate," said Casillas. A weaker peso makes Mexican exports more competitive abroad. The Mexican peso on Tuesday was trading at around Ps20.30 to the dollar, and has weakened by 18.5pc in the past year from about Ps16.6 to the dollar a year ago. If President Claudia Sheinbaum's administration avoids the tariffs, the peso may strengthen to around Ps 19.00/$1 in upcoming days, said Martinez. If the tariffs are applied during a brief period or only for the automobile sector, the exchange rate could range between Ps21.00-22.00 per dollar, said Martinez. However, even without any tariff being applied, Mexico's economy is expected to grow only by around 0.7pc this year, less than the estimates made late in 2024 of around 1.4pc, due to the deceleration of the US economy, Mexico's main trading partner, said Casillas. The US economy is showing signs of slowing down, specially in the industrial sector, which will impact Mexico's growth for the year. Also, this uncertainty is directly affecting any upside expected from so-called nearshoring as companies would now lose interest in moving their manufacturing lines to Mexico if there is no clear benefit in using the USMCA to avoid tariffs, said Casillas. By Édgar Sígler Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

US manufacturing contracts in March: ISM

01/04/25

News

01/04/25

US manufacturing contracts in March: ISM

Houston, 1 April (Argus) — Economic activity in the US manufacturing sector fell back into contraction in March after a brief expansion as businesses braced for US president Donald Trump's threatened tariffs on imports. The manufacturing purchasing managers' index fell to 49 in March, down from the 50.3 in February, the Institute for Supply Management reported Tuesday. That followed three months of expansion — above the breakeven threshold of 50 — following 26 months of contraction. The new orders index contracted for a second month in a row, falling to 45.2, down by 3.4 points from the prior month. Production fell to 48.3 from 50.7. New export orders fell to 49.6 in March from 51.4 the prior month. "Demand and production retreated and destaffing continued, as panelists' companies responded to demand confusion," ISM said. "Prices growth accelerated due to tariffs, causing new order placement backlogs, supplier delivery slowdowns and manufacturing inventory growth." The prices index surged to 69.4, up from 62.4 in February and the highest since mid-2022. Employment fell by 2.9 points to 47.6. The supplier delivery index fell by 1 point to 53.5, indicating ongoing slowing in deliveries and slowing demand. Trump plans to unveil sweeping "reciprocal" tariffs on major foreign trade partners on 2 April after previewing or announcing multiple tariff actions since taking office, including a 20pc tariff on all imports from China and a 25pc tax on all imported steel and aluminum that both took effect last month. Trump last month also announced a 25pc tariff on all imported cars, trucks and auto parts, scheduled to go into effect on 3 April. The measures, together with mass federal government layoffs and spending cuts, spooked US equity markets, which last month posted heavy losses. Comments focus on tariff confusion Comments from survey participants highlighted uncertainty over how Trump's tariff plans would effect operations and the economy. "Acute shortages continue to impact supply chain continuity," a transportation equipment executive said. "Chinese restrictions on critical minerals such as germanium have caused major shortages, resulting in all supply needed in 2025 already assumed — and, not surprisingly, significant price increases as a result." "Customers are pulling in orders due to anxiety about continued tariffs and pricing pressures," according to a computer and electronic products executive. "Business condition is deteriorating at a fast pace," a machinery executive commented. "Tariffs and economic uncertainty are making the current business environment challenging." "New order levels have increased and are better than expected," a fabricated metals executive said. "We suspect that our customers are trying to build inventory at current prices to get ahead of expected tariff and related cost increases." By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

ArcelorMittal raises NW EU HRC offer to €700/t

01/04/25

News

01/04/25

ArcelorMittal raises NW EU HRC offer to €700/t

London, 1 April (Argus) — European market leader ArcelorMittal has raised its hot-rolled coil (HRC) offer to €700/t base in the north. Its previous offer was €680/t base. The producer recently has seen an increase in enquiries and bookings, aided by the steel safeguard review. This trend has been most prevalent on HRC in the north, as well as cold-rolled and hot-dip galvanised across Europe. European mills have been in no rush to sell, with delivery performances under pressure from some as a result of low utilisation rates and issues at some producers causing backlogs. At the same time, mills expect import arrivals to fall in the coming months, although there could be some overhang this quota period, after the safeguard review and imposition of provisional anti-dumping duties on Egypt, Japan and Vietnam. In the futures market today, a fourth-quarter strip traded at €670/t, broadly in line with the settlement on 31 March. The physical market is largely quiet, as participants wait to see how much material clears today and what tariffs are announced by US president Donald Trump. North EU mill margins have nearly reached a year-long high in recent days, with the spread for NW EU HRC over blast furnace costs having reached €181/ on 31 March, the highest level since €189/t on 5 April. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more