Latest market news

Viewpoint: High nickel premiums the new normal

  • Market: Metals
  • 29/12/22

European nickel premiums scaled all-time record highs in 2022 as the Russia-Ukraine war, rising underlying nickel prices on the London Metal Exchange (LME) and declining stocks in LME warehouses changed the dynamics of the spot market.

The Argus assessment for the 4x4 inch nickel cathode in-warehouse Rotterdam premium averaged $1,472.65/t this year, up by more than five times relative to $258/t in 2021, with the assessment last at $700-1,200/t. The average premium for full-plate cathode this year was $661/t, more than 11 times higher than last year's $57/t, being last assessed at $200-250/t. And the in-warehouse Rotterdam premium for nickel briquette surged to an average $1,195.25/t this year, an eight-fold rise compared to 2021, with the assessment last at $650-750/t.

Premiums eased after peaking across the board to more than $3,000/t in the immediate aftermath of the LME nickel market collapse in March, and have since been steady at current levels throughout the fourth quarter amid uneven trading patterns and tight availability. Premiums strengthened briefly as the LME considered imposing an outright ban or volume-based restrictions on Russian nickel warrants held in its warehouses, but stabilised soon after the LME decided to maintain status quo regulation.

High premiums this year have also been linked to wild price shifts in nickel prices on the LME, as poor liquidity has weighed on trading to the extent that large swathes of the market consider nickel prices to have decoupled from physical fundamentals. Official cash nickel prices traded between $21,275.00/t and $31,062.50/t during the fourth quarter of this year.

"Pretty much everyone accepts the current level [of premiums] is the new reality", a trader said.

Heading into 2023, market participants in Europe mostly expect spot premiums to hold stable at minimum on the uncertainty around Russian supply — the biggest source of European melt — in addition to sharp swings in benchmark nickel prices and the ongoing inflationary pressures on logistics and freight. Some buyers in Europe are heard to be favouring spot purchases over the deployment of term-contracts, particularly as underlying demand from stainless steel producers is expected to remain weak amid an economic downturn in the bloc.

But traders cautioned that a uniform direction to premiums is unlikely in the near-term as the market continues to be volatile. Sparse stocks in LME warehouses, which recently touched a 14-year low and have otherwise amounted to an availability of less than two weeks for much of this year, have driven the strength in premiums. But a downside to premiums could emerge from large stockpiles of Russian warrants accumulating in LME warehouses to artificially alter nickel prices, they warned.

Russian-origin nickel has consistently accounted for less than 5pc of all LME nickel warrants through the fourth quarter, according to several market participants surveyed by Argus, suggesting that consumers were still purchasing the material directly. And while Russia's major nickel producer Nornickel has had to rethink supply chains and logistics to support its operations while also evaluating settlement terms and lending capabilities it has with Western banks following the Ukraine war, it has remained on track to meet its annual nickel production guidance of 205,000-215,000t this year.

"One thing that Nornickel has in its favour is that it is a low-cost producer for Europe", a second trader said. "They have planned their sales conservatively and can thus also cope with any production losses."

Recent unconfirmed reports of Nornickel planning cuts to supply next year may be driven in part by issues around delivery of spare parts for its machinery and equipment that it acknowledged at the end of the third quarter. A hit to supply as a result of these problems is likely to affect European availability in what is an already tight market, providing upside to premiums, especially as other Class 1 producers are more expensive to buyers in the continent.

Non-Russian nickel created a unique divergence in spot nickel trading in 2022 — a first for the market — as some buyers and sellers self-sanctioned Russia after the Ukraine war. Cathode products in LME warehouses of non-Russian origin have particularly been subject to this separation, leading to wide spreads with premiums for these products, often reported to be up to five times higher relative to Nornickel material. Market participants expect this "mini" market to converge with the majority Russian-origin nickel trading over time, but warned that the bifurcation would persist for as long as the Ukraine war rages on.

The economic prospects of top nickel consumer China in 2023 will also influence the direction of European premiums in the new year, traders agree. A scenario of prolonged Chinese Covid-19 restrictions and lockdowns is likely to lead to lower primary nickel demand in the country, leading to a redirection of stocks into European warehouses, which would represent a possible downside to premiums. Amid the rising supply and use of low-grade nickel products in Asia, European market participants will further be keeping an eye on the extent of the Class 1 nickel surplus in the region.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
21/11/24

US alleges Nippon dumped HRC at higher rates

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

Recent deep-sea and short-sea cfr Turkey scrap deals


21/11/24
News
21/11/24

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan’s crude steel output drops further in October


21/11/24
News
21/11/24

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

ArcelorMittal could close two service centres in France


20/11/24
News
20/11/24

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Graphjet launches Malaysian biomass-to-graphite plant


20/11/24
News
20/11/24

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more