Latest market news

Turkey rebuild uncertainty fuels scrap speculation

  • Market: Metals
  • 28/02/23

The volume of rebar required for post-earthquake reconstruction activities in Turkey remains largely unknown, but speculation and initial government estimates have ignited a rapid strengthening in global ferrous scrap markets.

Three weeks since the Iskenderun region was struck by devastating earthquakes, clean-up and surveying of the damaged areas remains underway. Despite these ongoing efforts and numerous aftershocks, Turkish steelmakers in the affected region and elsewhere have swiftly returned to the deep-sea ferrous scrap market with robust steel sales volumes driving scrap demand and pricing to the highest since May 2022.

At the root of the rally has been an uptick in domestic rebar demand, driven in part by bullish short-term outlooks on rebuild-related steel requirements and restocking in the coming year, which could be accelerated in light of the upcoming presidential election in June.

Most market participants expect the net result to provide longer-term stability to Turkey's baseline monthly scrap import volumes as opposed to a short-term flash of demand based on timelines for reconstruction that factor in demolition, city planning, and rebuilding to take pace over the next 12-24 months.

Backing out scrap demand

The Turkish government told steelmakers earlier this month that an estimated 4mn metric tonnes (t) of rebar would be required for the rebuild work over the next 3-4 months, a timeline most have viewed as unrealistic.

Assuming standard melt loss between rebar/scrap, market sources estimated that if all rebar in the government's estimate was produced domestically, it would require around 4.5mn t of scrap, or roughly a fifth of the country's import volumes last year.

In 2022, Turkey imported 20.6mn t of scrap, or an average of 1.7mn t/month, of which about 15pc was sourced from the short-sea market.

The additional volume of scrap required based on the government's initial estimate would be 1.13mn t over four months, or roughly 37 additional bulk vessels based on typical cargo sizes, if the government's timeline was adhered to and no changes were made to import/export policies for steel products.

This would be on top of the average 45 cargoes per month that Turkey imported throughout 2022, based on market participants' estimates.

It is virtually impossible for this much additional seaborne scrap to be directed toward Turkey in such a short period of time.

Flows in exporting regions have been constrained in recent months and even if scrap were miraculously abundant worldwide, few exporters would have the capability to ramp up collection rates and processing capacity to achieve such an increase in outbound shipments.

Exporters would also have to start drawing off cargoes from dependable alternative overseas markets like Egypt or significantly cut sales to their domestic buyers, neither of which is likely to occur.

One sell-side source said it expects a more realistic timeline is for the core reconstruction period to take place over two years, adding 200,000-300,000t of domestic rebar demand each month. This extra rebar production could be met by Turkish mills and would require a more modest 5-6 additional deep-sea cargoes per month combined with small increases in short-sea and domestic scrap intake.

Skepticism and unknowns

Although most market participants remain largely skeptical of the figures initially targeted by the Turkish government, the commitment to a rapid reconstruction has still fueled an upturn in domestic rebar and imported scrap prices.

There is no question that rebar demand throughout the country will increase on reconstruction activities, though key factors remain unknown, including timelines, sourcing and changes in import/export policies or government implemented pricing or sales requirement schemes.

So far, the government has indicated a potential scheme to fix rebar prices on a US dollar basis, though market participants have questioned the feasibility because of Turkey's inherent and increased exposure to the global bulk scrap market.

Similarly, others have noted that a potential solution could also include removal on Turkey's 30pc duty on rebar imports, while some say that limitations on exports of rebar could also help to smooth the countries looming demand for material.

In 2022, Turkey exported about 6mn t of rebar, so even if all rebar exports were shifted into the domestic market there would still be a shortage if the four-month timeline was adhered to, and capacity utilization rates were unchanged.

Even if a combination of these scenarios is implemented, the net result will be increased steel demand and scrap consumption, which in the medium to long term will likely support and drive pricing.

Argus has tracked 18 deep-sea deals over the last 14 days, including five from the US, with HMS 1/2 80:20 pricing nearing $455/t cfr Turkey, the highest levels since late-May 2022, while expectations for further upside to scrap prices remain strong in the short term as gains in Turkish domestic rebar sales have outpaced scrap.

Turkey ferrous scrap imports

Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
21/11/24

US alleges Nippon dumped HRC at higher rates

US alleges Nippon dumped HRC at higher rates

Houston, 21 November (Argus) — The US government alleged that Japanese steelmaker Nippon Steel dumped hot-rolled (HR) flat steel products at higher rates than previously determined. The US Department of Commerce's International Trade Administration (ITA) determined that during the period from October 2022 through September 2023, Nippon sold HR steel flat products with a weighted-average dumping margin of 29.03pc, up from the 1.39pc dumping margin the ITA determined for the prior period of October 2021 through September 2022. Tokyo Steel Manufacturing, which was also investigated, was determined to have not sold HR flat steel below market value, unchanged from a prior review. US imports during the period from October 2022 through September 2023 of the investigated items from Japan were 202,000 metric tonnes (t), down from the 293,600t imported in the same period the prior year, according to customs data. The original investigation into imports of Japanese flat-steel products was concluded in 2016. The ITA is now reviewing the time period of October 2023 through September 2024 and expects to issue the final results of these reviews no later than 31 October 2025. The US imported 235,700t of the investigated products from Japan during that time, customs data showed. By Rye Druzchetta Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

Recent deep-sea and short-sea cfr Turkey scrap deals


21/11/24
News
21/11/24

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 21 November (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 19-Nov 5,000 345 November Izmir Greece HMS 1/2 80:20, shred Y 19-Nov 2,000 342 November Izmir Malta HMS 1/2 80:20, shred Y 12-Nov 3,000 348 November Izmir Romania HMS 1/2 80:20 N 12-Nov 5,000 350 November Izmir Croatia HMS 1/2 80:20 N 12-Nov 5,000 350 November Turkey France HMS 1/2 80:20 Y 12-Nov 10,000 351 November Marmara France HMS 1/2 80:20 Y Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 20-Nov 40,000 345 (80:20) December Marmara Scandinavia HMS 1/2 80:20, shred, bonus Y 20-Nov 20,000 340 (80:20) December Iskenderun UK HMS 1/2 80:20 Y 19-Nov 30,000 344 (75:25) December Izmir Cont. Europe HMS 1/2 80:20, bonus N 19-Nov 40,000 353 (80:20) December Iskenderun USA HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 354 (80:20) December Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 15-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Nov 20,000 350 (80:20) November Iskenderun UK HMS 1/2 80:20 N 13-Nov 40,000 356 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y 13-Nov 40,000 353 (80:20) December Marmara Cont. Europe HMS 1/2 80:20, shred, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan’s crude steel output drops further in October


21/11/24
News
21/11/24

Japan’s crude steel output drops further in October

Tokyo, 21 November (Argus) — Japan's crude steel production in October fell on the year for an eighth straight month, partly because of lower steel demand from the construction sector. The country produced 6.9mn t of crude steel in October, down by 7.8pc from a year earlier, according to preliminary data released by industry group the Japan Iron and Steel Federation (JISF) on 21 November. Crude steel production by basic oxygen furnace (BOF) fell by 6.8pc on the year to 5.1mn t, marking the eighth consecutive month of year-on-year fall. Crude steel output by electric arc furnace (EAF) declined for a third straight month by 10.5pc to 1.8mn t. A double-digit output fall by EAF is partly reflecting the weaker steel demand in the construction sector. The country's steel demand is heavily dependent on the automobile and construction sectors, and steel products for each industry are generally produced using the BOF and EAF methods respectively. Booked orders of ordinary steel for construction use in September fell by 11.3pc on the year to 651,035t, marking the fourth consecutive month of year-on-year decline, according to the separate data released by JISF on 18 November. The country's major steel producer JFE on 6 November revised downward its crude steel output to 22.4mn t for the current fiscal year ending 31 March 2025. This is 600,000t lower than its initial figure announced in August, partly owing to weaker than anticipated steel demand from the construction sector, according to the steel company. Rising material costs and labour shortages are causing delays in major construction projects, JFE said, adding that lower steel demand in the construction industry is "becoming even more obvious.". By Yusuke Maekawa Japanese ferrous output ('000't) Oct '24 Sep '24 Oct '23 m-o-m ± % y-o-y ± % Crude steel production Ordinary steel 5,328 5,098 5,792 4.5 -8.0 Specialty steel 1,597 1,525 1,719 4.7 -7.1 Total crude production 6,925 6,623 7,511 4.6 -7.8 Crude steel production method Basic oxygen furnace 5,101 4,794 5,473 6.4 -6.8 Electric arc furnace 1,824 1,829 2,038 -0.3 -10.5 Pig iron production 5,075 4,802 5,405 5.7 -6.1 Source: Japan Iron and Steel federation *Based on preliminary data Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

ArcelorMittal could close two service centres in France


20/11/24
News
20/11/24

ArcelorMittal could close two service centres in France

London, 20 November (Argus) — Europe's largest steelmaker ArcelorMittal is contemplating closing two service centres in France as part of a restructuring at its Centres de Services business in the country. The company informed staff on Tuesday that it might close its Reims and Denain sites because of a "sharp drop in activity among its industry and automotive customers", the company told Argus . Negotiations with trade unions will begin shortly, it said. Rumours about the potential closures have been circling since just before a large industry event in Hannover, Germany, in late October. Further consolidation and restructuring is expected throughout the European service centre market because of the fall in real consumption, and the difficult financial position it has caused for some processors. Most service centres have been selling processed sheet at a loss in recent months, because of weak end-consumption. German cold-roller Bilstein, that sells predominantly to the automotive industry, will reduce headcount and is contemplating closing one of its five lines, or reducing shifts across its business. There have also been market discussions about ArcelorMittal selling other automotive-facing service centres in Europe, as part of a wider reorganisation of the EU processing sector. Germany's largest steelmaker, ThyssenKrupp, has closed some of its distribution sites in its home country. Participants note the service centres are not part of ThyssenKrupp Steel Europe, which is still in talks with Daniel Kretinsky over taking a 50pc share in the business. ThyssenKrupp's ownership change could have wider ramifications for the service centre and steelmaking sector in general, with Kretinsky open to finding a strategic partner. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Graphjet launches Malaysian biomass-to-graphite plant


20/11/24
News
20/11/24

Graphjet launches Malaysian biomass-to-graphite plant

Singapore, 20 November (Argus) — Nasdaq-listed Graphjet Technology has started operations at its artificial graphite plant in Malaysia, which will produce battery-grade graphite using recycled palm kernel shells (PKS), the firm said on 19 November. Graphjet's facility has the capacity to produce 3,000 t/yr of graphite by recycling up to 9,000 t/yr of PKS, which is sufficient to produce batteries for 40,000 electric vehicles (EVs)/yr. The firm has already received its first shipment of PKS, it said. Graphjet has another artificial graphite production facility planned in US' Nevada, and it plans to produce hard carbon at the Malaysian facility to use as feedstock at the Nevada facility. The Nevada facility is expected to have the capacity to recycle 30,000 t/yr of PKS to produce 10,000 t/yr of battery-grade artificial graphite and is slated to begin production in 2026, said Graphjet in April. China, the dominant producer of graphite, added a number of graphite products into its export licensing scheme at the end of last year. The move back then alarmed its neighbours, Japan and South Korea , which are major battery-producing countries and they have since been looking to reduce their dependency on Chinese graphite. China's graphite flake exports fell by 23pc to 44,103t during January-September following the exports curb, according to Chinese customs data. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more