Steel price rise expected at auto strike end

Market: Metals, Petrochemicals
15/09/23

The US steel market expects prices to increase when the current automotive strike ends.

Steel sellers and buyers expect some level of price increase when the current United Auto Workers (UAW) strike against the Big Three US automakers concludes, citing depleted service center inventories and steel mills hungry to raise prices ahead of contract negotiations for 2024.

The UAW began a less disruptive "stand up" strike tactic this morning where initially only three facilities — one across each of Ford, General Motors (GM) and Stellantis — are on strike. The UAW has the option to expand the number of facilities they are striking. Currently around 13,000 of the UAW's 150,000 members are on strike, with the rest continuing to report to work.

A strike by all UAW auto members could cut US consumption of flat steel by as much as 409,000 short tons (st)/month with an additional 138,200st/month of other steel consumption and 134,300st/month of aluminum consumption, according to an Argus analysis of vehicle composition data. Copper consumption would be curtailed another 13,800st/month.

One large service center and a steelmaker both said a two-week or shorter strike would have little impact on consumption and prices. The buyer added that steel mills would likely react with price increases, while the mill said the squeeze of mill margins puts more pressure on steelmakers to raise prices. Any increase would then be whittled away later in the year with normal seasonality. The buyer added that a longer strike would require mills to make tough decisions about production. Others think it will take a month for the market to start feeling the auto slowdown.

Another buyer noted that with 1mn st of steel production coming off line for planned maintenance in September and October, the outages could help blunt the extra supply on the market from lower automotive production.

Steel producers have been battling declining prices most of the year, with the Argus US hot-rolled coil (HRC) Midwest and southern assessments down by 43pc from the peak in April to $690/short ton (st) on 12 September.

Service centers were already reducing their inventories before a strike was threatened in response to the fall in prices, and the potential for a strike only exacerbated concerns over holding onto tonnage. Large discounts were reported for a range of potential tonnages from 2,000-20,000st, with the lowest reported prices in the $610/st range. Some believe steel mills were trying to fill their books ahead of the strike, which could cut demand across all steelmakers, particularly the auto-heavy integrated mills at Cleveland-Cliffs and US Steel.

By Rye Druzin

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

26/12/24

China's GFEX launches polysilicon futures contracts

Beijing, 26 December (Argus) — China's Guangzhou Futures Exchange (GFEX) has launched futures contracts and options for polysilicon today. This is the third contract that GFEX has launched, following the launch of its contracts for silicon metal in December 2022 and lithium carbonate in July 2023. The launch of polysilicon contracts is aimed at easing a supply surplus and ensuring market development, given increasing new capacities at polysilicon producers and lower-than-expected demand from the downstream silicon wafer industry in the past two years, according to market participants. The new contracts are for benchmark N-type polysilicon and substitute P-type polysilicon. The exchange has set a premium of 12,000 yuan/t ($1,644/t) for the N-type over the P-type. It is offering seven contracts starting from June 2025 until December. The most-traded June contracts for N-type polysilicon on the GFEX closed at Yn41,570/t on 26 December, up from the launch price of Yn38,600/t, with trading volumes totalling 301,655 lots, equivalent to around 905,000t. GFEX has established delivery points for the new contracts in eight provinces, including Inner Mongolia, Sichuan, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang. Output and consumption in these regions account for 93.1pc and 91pc of the country's total output and consumption respectively, according to GFEX. South China-based GFEX launched in April 2021 and is partly owned by China's four operational futures exchanges — the Shanghai Futures Exchange, Zhengzhou Commodity Exchange, Dalian Commodity Exchange and the China Financial Futures Exchange — with each holding a 15pc stake. Market reaction Some market participants expect the new futures contracts will ease pressure from ample spot inventories and shore up spot market sentiment in the coming months. But the market has yet to see immediate effects on the first trading day. Argus -assessed domestic prices for 5-5-3 grade silicon metal — a key feedstock in the production of silicon powder, which is the feedstock for polysilicon — held at Yn11,200-11,400/t delivered to ports on 26 December, unchanged from 24 December given limited buying interest from consumers. The most-traded February contracts for 5-5-3 grade silicon on the GFEX closed at Yn11,190/t on 26 December, down from Yn11,585/t on 25 December. China is the world's largest polysilicon producer, producing 1.74mn t during January-November, up by 33pc from a year earlier, according to data from the China nonferrous metals industry association (CNIA). It has an production capacity of over 2mn t/yr, according to industry estimates. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more

News

Japan’s crude steel output to recover in FY2025: IEEJ

26/12/24

News

26/12/24

Japan’s crude steel output to recover in FY2025: IEEJ

Tokyo, 26 December (Argus) — Japan's crude steel output is expected to recover during April 2025-March 2026, given higher output in wider domestic industries, according to government affiliated think-tank the Institution of Energy Economy Japan (IEEJ). The country's crude steel output will increase by 4.1pc on the year to 86.5mn t in 2024-25, according to the IEEJ's projection on 24 December. This will mark the first year-on-year growth in four years. A recovery is mostly attributed to an uptrend in wider domestic industrial sectors including automobile, electric and industrial machinery, IEEJ said. It sees domestic car output increasing by 1.8pc to 8.9mn units from a year earlier. IEEJ did not provide further details, but it suggested that expanding investment for digital and green transformation will underpin the steel demand throughout the period. The think-tank also predicts that the country's steel product exports will increase by 1.2pc on the year following an upward trend in the global manufacturing sectors. Japan delivered around 32mn t of steel products overseas during 2023-24, according to the industry group the Japan Iron and Steel Federation (JISF). The country's crude steel output has been sluggish throughout 2024, partly owing to weak demand from the construction and automobile sectors. Rising material costs and labour shortages have led to fewer construction projects in the country, weighing on steel demand. Operational suspensions at major auto manufacturers including Toyota and Daihatsu, following alleged false reporting on safety test results, also pressured steel demand. This partially led to the tenth consecutive month of year-on-year decline in booked orders of ordinary steel for car use in October, according to JISF. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Viewpoint: US BD demand awaits 1Q rebound as risks loom

24/12/24

News

24/12/24

Viewpoint: US BD demand awaits 1Q rebound as risks loom

Houston, 24 December (Argus) — US demand for butadiene (BD) is expected to increase in January, but buyer sentiment for the remainder of the first quarter remains uncertain. Inventory restocking in January is expected to draw down excess supply and provide near-term price support, according to market participants. Derivative manufacturers aim to rebuild inventories following earlier-than-normal destocking initiatives this year. Many buyers employ standard inventory control management strategies to avoid paying higher end-of-year inventory taxes, particularly in Texas. Others cut costs to improve year-end financial statements. Domestic demand in February and March is less clear, as market participants question whether the market will rebound from persistently low demand at the end of 2024. US BD prices on a contract basis fell by 12pc during the fourth quarter , owing to weak demand and oversupply. Demand was depressed by BD consumer turnarounds in October, seasonal slowdowns between November-December and trade pressures tied to derivative imports. US tire shipments this year are expected to rise by 2.1pc to 338.9mn units, surpassing the record set in 2021, according to the US Tire Manufacturers Association. However, market participants along with US trade data reference a jump in tire imports from Asia-Pacific. Both Bridgestone and Goodyear have said low-cost tire imports and structural changes in segment profitability across the Americas are eroding their market share, fueling capacity rationalization, asset sell-offs and plant closures in the region. Acrylonitrile butadiene styrene (ABS) is another segment at risk of stronger competition from low-cost, Asia-origin imports. Ineos Styrolution plans to permanently shut down its ABS plant in Addyston, Ohio, in 2025 because the facility cannot compete with imported material. "Over the past few years, we have seen the ABS market become increasingly competitive, particularly with growing competition from overseas imports," Ineos Styrolution chief executive Steve Harrington said in late October. Protectionist trade policies are likely to be a feature of president-elect Donald Trump's second administration, potentially altering business investment decisions and durable goods trade flows. Even if demand does not improve, planned maintenance in the first half of 2025 is expected to tighten BD supplies. A heavy turnaround cycle for steam crackers will concentrate in the first and second quarters, constraining availability of feedstock crude C4. One integrated US Gulf coast producer plans to enforce BD allocations while its assets are offline for planned maintenance. A separate, non-integrated producer has not announced BD sales controls, based on feedback from its customers. This same BD supplier was short on feedstock supplies for parts of this year, with the crude C4 merchant market illiquid in North America. A third producer has scheduled a cracker turnaround starting in January, but no indications emerged that would limit term volumes from its BD unit. Reduced BD supply during cracker maintenance is likely to pull volumes away from the export market until the second half of 2025. Export spot cargoes in the fourth quarter more than doubled from the third quarter, serving as a critical outlet to clear the domestic market of surplus BD supplies, even as lower export prices pressured US margins. By Joshua Himelfarb Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Viewpoint: US tariffs, new EAFs may alter scrap flows

24/12/24

News

24/12/24

Viewpoint: US tariffs, new EAFs may alter scrap flows

Pittsburgh, 24 December (Argus) — A wave of new electric arc furnace steel mills coming on line next year could transform scrap flows in North America, while looming US import tariffs could stunt cross-border trade. Six steel mills in the US and Canada, accounting for about 9.9mn short tons (st)/yr of electric arc furnace (EAF) production, are ramping up from late this year or scheduled to start up in 2025. The new EAFs, mostly along the Mississippi River and in Ontario, could be magnets for scrap and reshape flows across the southeast, Midwest and Canada, as scrap-fed EAF steelmakers continue to expand their role in North America, which was historically dominated by coal and iron ore-fed blast furnaces. Although some scrap dealers are optimistic about markets in the new year, market participants are carefully monitoring the effect president-elect Donald Trump's hawkish trade policies could have on scrap trading. Trump has pledged to impose 25pc tariffs on US imports from Canada and Mexico that could further shift North American scrap flows. Canada is the largest shipper of ferrous scrap into the US at an average of 3mn metric tonnes (t)/yr since 2021. Prime scrap imports between January and October this year averaged 47,000t/month, while shred imports averaged 70,000t/month, US customs data shows. The import tax would drive up the cost of Canadian scrap for US buyers and potentially reduce supply available to steel mills in the Midwest. Scrap traders noted that Trump can be unpredictable and may be using the threat of tariffs as leverage. "I'm pretty tepid on the first quarter," one Midwest dealer said. "People are trying to figure out how serious Trump is on tariffs." New EAFs to drive scrap demand The new scrap-fed EAFs in North America include Algoma Steel in Ontario, Hybar in Arkansas, and Nippon Steel's and ArcelorMittal's joint venture in Alabama. US Steel's Big River Steel began melting scrap at its second Arkansas EAF in October. EAF steelmaker Hybar plans to open its 630,000 st/yr reinforcing bar mill in northeast Arkansas in the summer of 2025. Hybar, along with Big River Steel and three Nucor mills already in the region, could further bolster the lower Mississippi River basin as a major scrap market. "I'm looking forward to next year because of the increased competition," a Midwestern scrap dealer said. "It's always good to have options." The new consumption could position northeast Arkansas and Tennessee as perhaps the top scrap consuming region, making it an industry barometer in 2025. Chicago has historically held that position and has been the benchmark region in contracts. Shifting flows in Canada Algoma Steel plans to begin ramping up two new EAFs in Sault Ste Marie, Ontario, in March next year to continue making hot-rolled coil and steel plate. The EAFs could eventually bring that facility's maximum steel production levels to 3.7mn st/yr once they fully replace Algoma's blast furnaces. The steelmaker will likely focus on low-copper shred and prime scrap grades to keep up the iron content in its melt mix as it transitions to EAF steelmaking, one Canadian scrap consumer said. Algoma may also continue to rely on raw inputs like direct reduced iron and hot briquetted iron as it ramps up its scrap buying to feed the EAFs. Market participants in Canada expect the mill to buy scrap from the prairies west of Sault Ste Marie, as well as from the greater Toronto area to the mill's east, though Algoma will face competition to pull scrap from the latter region. Scrap dealers in the upper Midwest are also keen to supply Algoma Steel because buyers in that region are scarce. A Midwest dealer noted that Algoma may ship in scrap from US ports on the Great Lakes. Algoma did not respond to requests for comment on its raw material plans. In 2021, the company set up a joint venture with Triple M Metal, a Canadian scrap dealer with 45 yards, that will likely supply scrap for Algoma Steel in Sault Ste Marie. By James Marshall and Brad MacAulay US steel mill capacity additions Million short tons/yr Company Location Product type Capacity added Start date US Steel/Big River Steel Osceola, AR Sheet 3.00 RAMPING ArcelorMittal/Nippon Steel Calvert, AL Sheet 1.65 2H 2024 Algoma Steel Sault Ste. Marie, ON Sheet 3.70 1Q 2025 Nucor Lexington, NC Bar 0.43 1Q 2025 Hybar Osceola, AR Bar 0.63 2Q 2025 CMC Berkeley, WV Bar 0.50 4Q 2025 Total 9.91 Argus reporting & public statements Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Viewpoint: FeV demand may grow next year

24/12/24

News

24/12/24

Viewpoint: FeV demand may grow next year

London, 24 December (Argus) — Ferro-vanadium (FeV) demand, which is closely tied to the carbon steel sector, has the potential to grow next year after a sluggish 2024, but economic and geopolitical uncertainties make conditions difficult to forecast. The outlook suggests FeV consumption will increase, driven by global steel production growth, particularly in countries such as India, as well as a potential rebound in key markets such as the US and Europe. The World Steel Association (Worldsteel) sees 2025 demand rising by 1.2pc to 1.772bn t, after a slight contraction this year. Most of the major economies, including China, are likely to record lower steel demand this year, although India bucks the trend, with robust demand growth expected throughout 2025. In developed economies, steel demand could grow by 1.9pc next year, driven by a recovery in the EU and, to a lesser extent, in the US and Japan. Buyers in Europe have been wary about purchasing large volumes of FeV in recent weeks, with fewer volumes expected in next year's long-term contracts as steel plants are looking for more flexibility and are "afraid of buying material that in the end they might not need", a trading firm said. Construction The construction sector remains a crucial driver of FeV consumption, primarily because of its dependence on steel for infrastructure projects. But the construction industry's challenges, particularly residential construction in developed economies, have dampened overall steel demand. High borrowing costs have stifled housing activity, with interest rate hikes slowing building projects. "A meaningful recovery in residential construction (in the EU, US and South Korea) is expected to begin from 2025 onwards with the expected easing of financing conditions," Worldsteel said. Rebar production also has faced challenges, with Chinese steel mills reducing output on lower demand from the real-estate sector up to September, when new rebar standards were introduced by China's government. The new standards were intended to encourage higher vanadium content in steel, but the anticipated FeV demand boost has not yet materialised because overall appetite for the alloy remains suppressed by ongoing struggles in China's real-estate sector. China's rebar output fell by 1.9pc on the year to 17.7mn t in October , with January-October output showing a 14pc drop from the same period a year earlier, according to data from the National Bureau of Statistics. Without any lift from China, European FeV prices remain driven primarily by weakness in the continent's own construction sector, which continues to limit steel rebar trading volumes. Argus' weekly Italian domestic rebar assessment was at €550/t ex-works on 11 December, marking an 11pc drop from the start of this year. Automotive The automotive sector, particularly the electric vehicles (EV) market, will be a key driver of FeV demand next year. High-strength low-alloy (HSLA) steel — a type of carbon steel known for its superior strength-to-weight ratio — is crucial for light vehicles and EVs. While light vehicles and EV manufacturing has slowed this year, with factory closures and inventory reductions by major carmakers such as Volkswagen and Stellantis , the industry is expected to recover next year as the push towards sustainability continues. The green transition, which includes renewable energy projects and electric grid expansions, will further contribute to the demand for HSLA steel and, by extension, FeV. But EV growth is likely to slow in the short term under the administration of US president-elect Donald Trump, who could prioritise traditional energy sectors, potentially limiting support for renewables, industry participants said. By Roxana Lazar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more