Latest market news

Iron ore offers little support to scrap price in Europe

  • Market: Metals
  • 23/07/19

Iron ore prices have surged since April, but this has had little impact on European ferrous scrap prices and is likely to provide only limited support in the coming two to three months.

The Argus daily 62pc Fe iron ore fines cfr Qingdao (ICX) assessment rose to $121.35/t on 15 July from below $90/t on 2 April because of expectations of tighter supply from major iron ore suppliers and limited intent from Chinese steel mills to reduce output, despite falling margins.

Some European market participants previously anticipated that the increase in iron ore prices in China, which is the main driver of European iron ore prices, would support European delivered to mill ferrous scrap prices in June and July. The expectation was that blast furnace-based steel mills might increase their use of scrap to offset higher iron ore costs.

European blast furnace mills typically consume a mixture of iron ore pellets and fines that they purchase through long-term contracts. Prices under the contracts are usually linked to one or a basket of cfr China indexes.

But scrap demand from many northwest European mills since April has fallen or remained largely unchanged at best. Weaker steel demand and prices coupled with scheduled maintenance and upgrade works at steel mills were the main drivers behind the fall in scrap demand.

The Argus monthly national average assessment for E40 shredded ferrous scrap delivered to mill in Germany fell to €239.26-249.26/t in July from €262-272/t in April.

Many mills were also unable to significantly increase the percentage of scrap used in blast furnaces because of technical reasons.

"It is not that easy to increase scrap usage in blast furnaces. Most mills in Europe have probably reached the maximum charge rate of scrap and will not be able, or even consider, to use more scrap even if iron ore prices rose above $200/t," one European steel mill said.

Another steel market participant noted that some US mini-mills have been looking at options to displace some direct reduced (DR) pellets with high-grade scrap products, but added that this activity is fairly limited within Europe.

The average scrap utilisation rate in European blast furnace crude steel production is around 15-20pc, according to estimates by multiple steelmakers.

The availability of competitively priced pig iron further dented some European mills' appetite to use more scrap. Scrap demand from some integrated mills in northwest Germany was lower in June and July as prices for contracted pig iron were considerably cheaper than scrap, one scrap supplier said.

Pig iron prices in Europe were also under pressure in May-June. The Argus assessment for Russian/Ukraine basic pig iron, two of the main suppliers of European imported pig iron, fell to $334/t fob Black sea on 27 June from $350/t on 25 April. Prices rebounded to above $340/t fob in mid-July because of reduced availability and higher sales to the US. But spot demand from European mills was still comparatively weak, market participants said.

Logistical price boost

Market participants expect scrap prices in Europe to have little support in the next two to three months as steel demand and prices are unlikely to rise, while Turkish demand for imported scrap will be volatile depending on Turkish mills' ability to export steel products.

But scrap prices could increase in the event of even a minor disruption to availability, particularly because flows are relatively tight as a result of slower manufacturing activity in the past few months and a seasonal fall in collection rates over the next six to eight weeks.

Any major disruption to scrap transportation through the inland waterway system in Germany, Belgium and the Netherlands may significantly reduce scrap suppliers' ability to efficiently allocate material between domestic and export markets. This may create a shortage of scrap and lift prices in some regions, as happened last summer.

German domestic scrap delivered to mill prices in August 2018 were limited to a fall of around €5/t from the previous month compared with initial expectations of a minimum €10/t drop, as suppliers were unable to move material on the Rhine river from southern Germany.

Exports from Belgium, Germany and the Netherlands, including trades between these countries, totalled 4.5mn t in August-October 2018, down by 4pc from over 4.7mn t in the same period a year earlier.

Water levels on the Rhine at the key measuring point of Kaub near Frankfurt fell below the loading threshold for some cargoes and vessels on 15 July for the first time this summer and have since remained below the threshold. Water levels are expected to continue to fall this week, which will further increase loading restrictions.

Some scrap suppliers said they do not expect the disruption to be as bad as last year because they have had more rainfall so far this year. But monitoring service Elwis forecasts only one day of rainfall in southwest Germany and Switzerland for the remainder of this month.

Transportation of scrap on trains to some destinations in northwest Europe is an alternative. But the problem of limited-to-no availability of cargo wagons in Germany that affected scrap mobility in 2018 remains unsolved, some scrap suppliers said.

China iron ore 62pc Fe vs Europe ferrous scrap E40 shred

Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
08/11/24

Japan’s domestic EV sales fall further in October

Japan’s domestic EV sales fall further in October

Tokyo, 8 November (Argus) — Sales of passenger electric vehicles (EVs) in Japan fell for a 12th straight month in October, mostly because of a drop in demand for domestic brands. Sales totalled 4,325 units in October, down by 35.1pc from a year earlier, according to data from three industry groups — the Automobile Dealers Association, the Japan Light Motor Vehicle and Motorcycle Association and the Japan Automobile Importers Association (JAIA). Sales were down by 32.7pc on the previous month. EVs accounted for just 1.3pc of Japan's total domestic passenger car sales last month, down by 0.7 percentage points from a year earlier. The fall in EV sales was mostly the result of lower sales of Nissan's Sakura, one of the domestic producer's top selling EV models. Sakura sales slumped by 51.6pc on the year to 1,448 units. Sales of foreign brand passenger EVs fell to 1,900 units, down by 4pc on the year. The decline largely reflected reduced supply by Germany's Volkswagen, a JAA representative told Argus . It remains unclear if the downtrend will continue given demand for imported EVs remains high in the Japanese market, the representative added. Imported EVs accounted for around 44pc of the country's total passenger EV sales in October. Japan's largest car producer Toyota on 6 November revised its global EV sales outlook downwards to 160,000 units for the current fiscal year that ends 31 March 2025. This is 11,000 units lower from the initial plan announced in May, the company said. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more
News

US Fed cuts rate by quarter point: Update 2


07/11/24
News
07/11/24

US Fed cuts rate by quarter point: Update 2

Updates with recast outlook of results in paragraph 4 Houston, 7 November (Argus) — The US Federal Reserve cut its target interest rate by 25 basis points today, its second cut since 2020, as it said inflation has "made progress" towards its 2pc target. The Fed's Federal Open Market Committee (FOMC) lowered the federal funds rate to 4.50-4.75pc from the prior range of 4.75-5pc. This followed a half-point cut made in mid-September, the first cut since 2020. The Fed has been cutting its target rate from two-decade highs as inflation, which peaked at 9.1pc in mid-2022, has come down to near the Fed's 2pc target. "The Committee will carefully assess incoming data, the evolving outlook, and the balance of risks" in considering additional adjustments to the target rate, the FOMC said in its statement after the two-day meeting. "Inflation has made progress toward the Committee's 2 percent objective but remains somewhat elevated," it said, adding that the unemployment rate "has moved up but remains low." The rate cut comes two days after Republican Donald Trump, a vocal critic of the Federal Reserve during his first term in office from 2017-2021, was elected president. With vote counting ongoing, the Republicans appeared poised to win both houses of Congress, giving Trump his best opportunity to enact his agenda since 2018. Fed chair Jerome Powell told reporters after the Fed's decision that he would not resign before his term ends in 2026 if asked to do so by Trump. He said the president did not have the power to fire or demote Fed chairmen. Trump, during his first term, nominated Powell to his position as Fed chair and he took office in February 2018, according to the Federal Reserve board's website. President Joe Biden reappointed him and he was sworn in in May 2022 for a second four-year term. Powell declined to discuss the incoming Trump administration's policies or "anything directly or indirectly" related to the election during the press conference. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

US Fed cuts rate by quarter point: Update


07/11/24
News
07/11/24

US Fed cuts rate by quarter point: Update

Updates with Powell's comments from press conference after meeting. Houston, 7 November (Argus) — The US Federal Reserve cut its target interest rate by 25 basis points today, its second cut since 2020, as it said inflation has "made progress" towards its 2pc target. The Fed's Federal Open Market Committee (FOMC) lowered the federal funds rate to 4.50-4.75pc from the prior range of 4.75-5pc. This followed a half-point cut made in mid-September, the first cut since 2020. The Fed has been cutting its target rate from two-decade highs as inflation, which peaked at 9.1pc in mid-2022, has come down to near the Fed's 2pc target. "The Committee will carefully assess incoming data, the evolving outlook, and the balance of risks" in considering additional adjustments to the target rate, the FOMC said in its statement after the two-day meeting. "Inflation has made progress toward the Committee's 2 percent objective but remains somewhat elevated," it said, adding that the unemployment rate "has moved up but remains low." The rate cut comes two days after Republican Donald Trump, a vocal critic of the Federal Reserve during his first term in office from 2017-2021, was elected president. With vote counting ongoing, the Republicans appeared set to win both houses of Congress, giving Trump virtually unrestrained powers. Fed chair Jerome Powell told reporters after the Fed's decision that he would not resign before his term ends in 2026 if asked to do so by Trump. He said the president did not have the power to fire or demote Fed chairmen. Trump, during his first term, nominated Powell to his position as Fed chair and he took office in February 2018, according to the Federal Reserve board's website. President Joe Biden reappointed him and he was sworn in in May 2022 for a second four-year term. Powell declined to discuss the incoming Trump administration's policies or "anything directly or indirectly" related to the election during the press conference. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

US Fed cuts rate by quarter point, 2nd cut this year


07/11/24
News
07/11/24

US Fed cuts rate by quarter point, 2nd cut this year

Houston, 7 November (Argus) — The US Federal Reserve cut its target interest rate by 25 basis points today, its second cut since 2020, as it said inflation has "made progress" towards its 2pc target. The Fed's Federal Open Market Committee (FOMC) lowered the federal funds rate to 4.50-4.75pc from the prior range of 4.75-5pc. This followed a half-point cut made in mid-September, the first cut since 2020. The Fed has been cutting its target rate from two-decade highs as inflation, which peaked at 9.1pc in mid-2022, has come down to near the Fed's 2pc target. "The Committee will carefully assess incoming data, the evolving outlook, and the balance of risks" in considering additional adjustments to the target rate, the FOMC said in its statement after the two-day meeting. "Inflation has made progress toward the Committee's 2 percent objective but remains somewhat elevated," it said, adding that the unemployment rate "has moved up but remains low." The rate cut comes two days after Republican Donald Trump, a vocal critic of the Federal Reserve during his first term in office from 2017-2021, was elected president. With vote counting ongoing, the Republicans appeared set to win both houses of Congress, giving Trump virtually unrestrained powers. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

US W mining essential after Trump victory: ITIA


07/11/24
News
07/11/24

US W mining essential after Trump victory: ITIA

London, 7 November (Argus) — The rise of protectionism and prospects of increasing tariffs between the US and China prompted discussions about the need to mine tungsten domestically in the US during the International Tungsten Industry Association (ITIA) conference in Barcelona this week. "The development of domestic tungsten production in North America is critical," a US tungsten consumer told Argus . The hard metal is gaining attention from the Department of Defence (DoD) owing to its applications within defence industries and potential future use in nuclear fusion. The lack of domestic tungsten is considered a significant risk to US national security. The US introduced a 25pc tariff on imported Chinese tungsten-related products effective from 1 August 2024. Furthermore, imports of tungsten-mined ore from China and Russia for DoD procurement will be banned from 2027. The DoD is providing an increasing number of grants for companies to establish domestic manufacturing. It is doing so through programmes such as the Defence Production Act Investments (DPAI), which, since the beginning of the fiscal year 2024, issued 55 awards totalling $555mn. "Many parties want us to move this project forward as quickly as we can," said Oliver Friesen, executive director of junior miner Guardian Metal, which is developing the largest tungsten deposit in the US, Nevada. "If we were to start production today, the tungsten concentrate from (our project) Pilot Mountain would represent the only primary domestic production in the US," Friesen said. Guardian Metal anticipates it can source 20pc of US tungsten consumption within three years. This funding initiative for domestic manufacturing has bipartisan support from both Republicans and Democrats, but it could accelerate with Donald Trump in the White House. The president-elect proposed tariffs of up to 20pc on all foreign goods and 60pc tariffs on all imports from China on the campaign trail. China accounts for more than 80pc of global tungsten production. One conference attendee told Argus he anticipates the tariffs to be a reality and not mere rhetoric. Any measures could provoke a retaliatory response from China, which has already imposed export controls on dual-use materials such as antimony, gallium and germanium. Despite this, some traders express scepticism about the need for the US to produce its tungsten, as consumers are sourcing material from "friendly jurisdictions" and political allies such as Portugal and Spain, and have plans to buy from South Korea. Additionally, the demand for virgin material may decrease, given the increasing viability of recycling, suggesting that less material may be necessary. However, amid regional shifts, one participant emphasised, "If the US becomes isolated, the material needs to be produced domestically." By Cristina Belda Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more