Polish coking coal output shows signs of recovery

Market: Coal, Coking coal, Metals
29/08/19

Signs of recovery are emerging in Polish coal output but plans by producer Jastrzebska Spolka Weglowa (JSW) to substantially increase its coking coal output may take some months and are not without challenges.

Poland's overall coal production, comprising coking and thermal, recovered from a slump in June and rose by nearly 3pc from a year earlier and 13pc against the previous month to more than 5.3mn t in July, data from Poland's government statistics office GUS show. But January-July output was still 2.5pc down from the previous year at 36.2mn t.

JSW's output of coal increased in July and August following a weak start to the year. The company maintains its plans to slightly increase its thermal and coking coal output this year to about 15.5mn t from 15mn t in 2018. This is despite output in the first half falling by 11.5pc from a year earlier to just over 7mn t.

Investment to access new deposits at its existing mines will ensure recovery in production in the second half of the year, the company said.

JSW also plans to increase the share of coking coal in its overall coal production. Coking coal accounted for 69pc of JSW's total coal output in the first half, with the company planning to increase this share to over 70pc at the end of this year.

JSW plans to increase the share of coking coal in its Budryk mine to about 60pc in November from just more than 21pc currently. But the plan involves mining at a depth of 1,290m, the deepest mine in Poland. JSW also plans to increase the share of coking coal over thermal coal at some of its other mines next year.

JSW's plans have the potential to ease tight supplies of coking coal in Poland. Lower domestic output this year have forced steel producers to increase imports despite weakening demand for steel. The mining firm declared force majeure following a fatal shaft collapse at its Zofiowka mine in May. Earthquakes in January also caused a collapse at the Polska Grupa Gornicza's Rydlutowy mine and also hit JSW's Knurow-Szczyglowice mine in southern Poland.

Output of coke and steel in the country remained subdued in July. Coke production in July fell by 3.5pc from the previous year to 762,000t, GUS data show. January-July output was 4.5pc lower at 5.3mn t.

Crude steel output in July rose by 2pc from the previous year to 826,000t but remained 7pc down at 5.7mn t for January-July.

JSW is still optimistic about demand from coke plants and steel producers in the second half of this year that may see some relief in their costs because of falling prices of coking coal. The company said it has not received any request from any of its customers to reduce supplies below contracted volumes and expects European steel producers may reconsider earlier plans to scale back output.

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

26/12/24

Viewpoint: US gas market poised for more volatility

New York, 26 December (Argus) — US natural gas markets may be subjected to more dramatic price swings in 2025 as growing LNG exports and increasingly price-sensitive producers place greater pressure on the US' stagnant gas storage capacity. Those price swings could pose challenges for consumers without ample access to gas supplies, as well as producers interested in keeping some output unhedged to capture potentially higher prices without taking on excessive financial risk. But volatility may also present opportunities for traders looking to exploit unstable price spreads, and for producers that can adapt their operations to fit a more unpredictable pricing environment. Calm before the storm High storage levels and low spot prices this year — averaging $2.11/mmBtu through November this year at the US benchmark Henry Hub — triggered by an unusually warm 2023-24 winter, may have obscured some of the structural factors pushing the US gas market into a more volatile future. But those structural factors remain and loom increasingly large for prices. The US has moved from a roughly 60 Bcf/d (1.7bn m³/d) market eight years ago to a more than 100 Bcf/d market today, "and we haven't grown our storage capacity at all", Rich Brockmeyer, head of North American gas and power at commodity trading house Gunvor, said earlier this year. As supply and demand for US gas grow, the country's roughly 4.7-Tcf storage capacity becomes ever less effective in stemming demand shocks, such as extreme winter weather events, which can more rapidly draw down inventories than in years past. Additionally, a growing share of US gas is being consumed by LNG export terminals being built and expanded on the US Gulf coast. When those facilities encounter unexpected problems and cease operations — as has happened numerous times at the 2 Bcf/d Freeport LNG terminal in Texas in recent years — volumes that were previously being liquefied and sent overseas were instead backed up into the domestic market, crushing prices. More LNG exports may mean more opportunities for such supply shocks. US LNG exports are expected to increase by 15pc to almost 14 Bcf/d in 2025 as operations begin at Venture Global's planned 27.2mn t/yr Plaquemines facility in Louisiana and Cheniere's 11.5mn t/yr Corpus Christi, Texas, stage 3 expansion, US Energy Information Administration data show. Spot price volatility will be most acutely felt in regions like New England that lack underground gas storage. "In areas like the Gulf coast, where you have a lot of storage, it won't be a problem," Alan Armstrong, chief executive of Williams, the largest US gas pipeline company, told Argus in an interview. Producers' trade-off Volatile gas markets are a mixed bag for producers, many of whom profit from volatility while also struggling to plan and budget based on uncertain revenues for unhedged volumes. Though insufficient gas storage deprives the market of stability, "from the standpoint of a marketing and trading guy that's trying to manage my gas supply to customers and my trading book, I love volatility",said Dennis Price, vice president of marketing and trading at Expand Energy, the largest US gas producer by volume. BP chief financial officer Sinead Gorman in November 2023 specifically named Freeport LNG's eight-month-long shutdown in 2022-23 from a fire as a driver of volatility in the global gas market. The supermajor was able to exploit the "incredibly fragile" gas market, she said, which was a key factor driving the success of its integrated gas business. "Those opportunities are what we typically seek and enjoy," Gorman said. Increasingly, producers have also been adapting to a more volatile market by switching production on and off in response to prices, but often without revealing the price at which a supply response will occur. Expand Energy, for instance, told investors in October that it was amassing drilled but uncompleted wells and wells that had yet to be brought on line, which it could activate relatively quickly when prices rise. It declined to name the price at which that would occur. Market participants, attempting to price in this phenomenon by anticipating producers' next moves may respond more dramatically to supply signals than in the past, when production was steadier. Producers' increased responsiveness to prices could help to balance the market somewhat, though more aggressive intervention into operations could take a toll on well performance and pipelines, FactSet senior energy analyst Connor McLean said. Producers are "treating the reservoir itself like a storage facility", Price said. By Julian Hast Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more

News

Viewpoint: Real, tariffs to hit Brazil steel imports

26/12/24

News

26/12/24

Viewpoint: Real, tariffs to hit Brazil steel imports

Sao Paulo, 26 December (Argus) — Steel importers in Brazil are likely to face a tougher market in 2025 as government measures and the Brazilian real's depreciation to the US dollar make products from abroad less attractive. Brazilian steel importers are concerned that tariff-quota and antidumping policy changes made this year by the federal and state governments could raise costs for importing cargoes in 2025, likely exacerbating the impacts of a sharply depreciated Brazilian real relative to the dollar. The concerns come as US president-elect Donald Trump is already raising global trade tensions, with specific focus on Mexico, Canada and China, that could unleash waves of dueling trade measures. After seeing strong import growth in the post-Covid-19 recovery, Brazil steel importers are fretting they may lose momentum. Brazil's steel imports year-to-date November rose by nearly 24.4pc to 5.6mn metric tonnes (t) from the same period a year earlier. They are expected to end the full year 2024 up by 24pc, according to steel association Aco Brasil, after climbing by 50pc in 2023. Apparent consumption rose by 9.6pc to 24mn t in the 11 months through November, while production increased by just 5.6pc to 31.17mn t from a year earlier. Even with a 28pc depreciationof the real to the dollar in the 12 months through 24 December, prices for dollar-denominated steel imports still have a cost advantage over domestically produced steel. But that advantage is narrowing as the real weakens, with the price difference from imports over the domestic market narrowing to just $112/t in the latest assessment for hot-rolled coils (HRC) from $172/t in mid-October . "The dollar's [appreciation to the real] is messing up imports," one market participant told Argus , saying a wider price advantage for importers was necessary to offset issues like the exchange rate risk and the shipping time. Market participants also cited rising borrowing costs in Brazil as an additional challenge for imports, as many buyers rely on financing to purchase material from abroad. Brazil's central bank on 11 December unexpectedly hiked its target interest rate by a full percentage point to 12.25pc , citing the country's uncertain fiscal situation, accelerating inflation and challenging external conditions. Importers recently expressed concerns over Santa Catarina state's decision to no longer grant tax incentives for imports of six different steel and iron products for commercialization or resale in 2025. Although the timeline for implementing the measure was postponed to July and could face changes, importers remain concerned and are monitoring any possible reviews of the decision, sources told Argus . Santa Catarina's main port, Sao Francisco do Sul, accounted for over one-third of every steel product that is imported to Brazil from January to September, according to data from the country's distributors association, INDA, published in September. On the federal front, the government is likely to announce new and renewed antidumping measures for products coming mainly from China, Brazil's largest steel supplier. Another obstacle for importers would be a possible review of the tariff system for steel imports, which was implemented in June 2024 and led to additional tariffs of up to 25pc. The measure proved mostly ineffective at curbing imports into Brazil, and the industry group Aco Brasil said it would ask for adjustments . Despite the challenges, there is still room for importers to bring material to Brazil , as the country lacks steel to supply its domestic demand, another market participant said. "Brazil will always need imports because it still lacks some key home-made products to feed its market," the participant said. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

China's GFEX launches polysilicon futures contracts

26/12/24

News

26/12/24

China's GFEX launches polysilicon futures contracts

Beijing, 26 December (Argus) — China's Guangzhou Futures Exchange (GFEX) has launched futures contracts and options for polysilicon today. This is the third contract that GFEX has launched, following the launch of its contracts for silicon metal in December 2022 and lithium carbonate in July 2023. The launch of polysilicon contracts is aimed at easing a supply surplus and ensuring market development, given increasing new capacities at polysilicon producers and lower-than-expected demand from the downstream silicon wafer industry in the past two years, according to market participants. The new contracts are for benchmark N-type polysilicon and substitute P-type polysilicon. The exchange has set a premium of 12,000 yuan/t ($1,644/t) for the N-type over the P-type. It is offering seven contracts starting from June 2025 until December. The most-traded June contracts for N-type polysilicon on the GFEX closed at Yn41,570/t on 26 December, up from the launch price of Yn38,600/t, with trading volumes totalling 301,655 lots, equivalent to around 905,000t. GFEX has established delivery points for the new contracts in eight provinces, including Inner Mongolia, Sichuan, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang. Output and consumption in these regions account for 93.1pc and 91pc of the country's total output and consumption respectively, according to GFEX. South China-based GFEX launched in April 2021 and is partly owned by China's four operational futures exchanges — the Shanghai Futures Exchange, Zhengzhou Commodity Exchange, Dalian Commodity Exchange and the China Financial Futures Exchange — with each holding a 15pc stake. Market reaction Some market participants expect the new futures contracts will ease pressure from ample spot inventories and shore up spot market sentiment in the coming months. But the market has yet to see immediate effects on the first trading day. Argus -assessed domestic prices for 5-5-3 grade silicon metal — a key feedstock in the production of silicon powder, which is the feedstock for polysilicon — held at Yn11,200-11,400/t delivered to ports on 26 December, unchanged from 24 December given limited buying interest from consumers. The most-traded February contracts for 5-5-3 grade silicon on the GFEX closed at Yn11,190/t on 26 December, down from Yn11,585/t on 25 December. China is the world's largest polysilicon producer, producing 1.74mn t during January-November, up by 33pc from a year earlier, according to data from the China nonferrous metals industry association (CNIA). It has an production capacity of over 2mn t/yr, according to industry estimates. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan’s crude steel output to recover in FY2025: IEEJ

26/12/24

News

26/12/24

Japan’s crude steel output to recover in FY2025: IEEJ

Tokyo, 26 December (Argus) — Japan's crude steel output is expected to recover during April 2025-March 2026, given higher output in wider domestic industries, according to government affiliated think-tank the Institution of Energy Economy Japan (IEEJ). The country's crude steel output will increase by 4.1pc on the year to 86.5mn t in 2024-25, according to the IEEJ's projection on 24 December. This will mark the first year-on-year growth in four years. A recovery is mostly attributed to an uptrend in wider domestic industrial sectors including automobile, electric and industrial machinery, IEEJ said. It sees domestic car output increasing by 1.8pc to 8.9mn units from a year earlier. IEEJ did not provide further details, but it suggested that expanding investment for digital and green transformation will underpin the steel demand throughout the period. The think-tank also predicts that the country's steel product exports will increase by 1.2pc on the year following an upward trend in the global manufacturing sectors. Japan delivered around 32mn t of steel products overseas during 2023-24, according to the industry group the Japan Iron and Steel Federation (JISF). The country's crude steel output has been sluggish throughout 2024, partly owing to weak demand from the construction and automobile sectors. Rising material costs and labour shortages have led to fewer construction projects in the country, weighing on steel demand. Operational suspensions at major auto manufacturers including Toyota and Daihatsu, following alleged false reporting on safety test results, also pressured steel demand. This partially led to the tenth consecutive month of year-on-year decline in booked orders of ordinary steel for car use in October, according to JISF. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Viewpoint: US tariffs, new EAFs may alter scrap flows

24/12/24

News

24/12/24

Viewpoint: US tariffs, new EAFs may alter scrap flows

Pittsburgh, 24 December (Argus) — A wave of new electric arc furnace steel mills coming on line next year could transform scrap flows in North America, while looming US import tariffs could stunt cross-border trade. Six steel mills in the US and Canada, accounting for about 9.9mn short tons (st)/yr of electric arc furnace (EAF) production, are ramping up from late this year or scheduled to start up in 2025. The new EAFs, mostly along the Mississippi River and in Ontario, could be magnets for scrap and reshape flows across the southeast, Midwest and Canada, as scrap-fed EAF steelmakers continue to expand their role in North America, which was historically dominated by coal and iron ore-fed blast furnaces. Although some scrap dealers are optimistic about markets in the new year, market participants are carefully monitoring the effect president-elect Donald Trump's hawkish trade policies could have on scrap trading. Trump has pledged to impose 25pc tariffs on US imports from Canada and Mexico that could further shift North American scrap flows. Canada is the largest shipper of ferrous scrap into the US at an average of 3mn metric tonnes (t)/yr since 2021. Prime scrap imports between January and October this year averaged 47,000t/month, while shred imports averaged 70,000t/month, US customs data shows. The import tax would drive up the cost of Canadian scrap for US buyers and potentially reduce supply available to steel mills in the Midwest. Scrap traders noted that Trump can be unpredictable and may be using the threat of tariffs as leverage. "I'm pretty tepid on the first quarter," one Midwest dealer said. "People are trying to figure out how serious Trump is on tariffs." New EAFs to drive scrap demand The new scrap-fed EAFs in North America include Algoma Steel in Ontario, Hybar in Arkansas, and Nippon Steel's and ArcelorMittal's joint venture in Alabama. US Steel's Big River Steel began melting scrap at its second Arkansas EAF in October. EAF steelmaker Hybar plans to open its 630,000 st/yr reinforcing bar mill in northeast Arkansas in the summer of 2025. Hybar, along with Big River Steel and three Nucor mills already in the region, could further bolster the lower Mississippi River basin as a major scrap market. "I'm looking forward to next year because of the increased competition," a Midwestern scrap dealer said. "It's always good to have options." The new consumption could position northeast Arkansas and Tennessee as perhaps the top scrap consuming region, making it an industry barometer in 2025. Chicago has historically held that position and has been the benchmark region in contracts. Shifting flows in Canada Algoma Steel plans to begin ramping up two new EAFs in Sault Ste Marie, Ontario, in March next year to continue making hot-rolled coil and steel plate. The EAFs could eventually bring that facility's maximum steel production levels to 3.7mn st/yr once they fully replace Algoma's blast furnaces. The steelmaker will likely focus on low-copper shred and prime scrap grades to keep up the iron content in its melt mix as it transitions to EAF steelmaking, one Canadian scrap consumer said. Algoma may also continue to rely on raw inputs like direct reduced iron and hot briquetted iron as it ramps up its scrap buying to feed the EAFs. Market participants in Canada expect the mill to buy scrap from the prairies west of Sault Ste Marie, as well as from the greater Toronto area to the mill's east, though Algoma will face competition to pull scrap from the latter region. Scrap dealers in the upper Midwest are also keen to supply Algoma Steel because buyers in that region are scarce. A Midwest dealer noted that Algoma may ship in scrap from US ports on the Great Lakes. Algoma did not respond to requests for comment on its raw material plans. In 2021, the company set up a joint venture with Triple M Metal, a Canadian scrap dealer with 45 yards, that will likely supply scrap for Algoma Steel in Sault Ste Marie. By James Marshall and Brad MacAulay US steel mill capacity additions Million short tons/yr Company Location Product type Capacity added Start date US Steel/Big River Steel Osceola, AR Sheet 3.00 RAMPING ArcelorMittal/Nippon Steel Calvert, AL Sheet 1.65 2H 2024 Algoma Steel Sault Ste. Marie, ON Sheet 3.70 1Q 2025 Nucor Lexington, NC Bar 0.43 1Q 2025 Hybar Osceola, AR Bar 0.63 2Q 2025 CMC Berkeley, WV Bar 0.50 4Q 2025 Total 9.91 Argus reporting & public statements Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more