US Steel posts first loss since 2017
Integrated steelmaker US Steel posted its first loss in a year and a half as shipments at its European operations fell and prices for its products declined.
The company posted a loss of $84mn in the third quarter, swinging from a profit of $291mn a year earlier and its first loss since the first quarter of 2017.
The quarterly loss comes as European steel demand remains sluggish and prices in the US fall due to oversupply, outweighing US Steel's steady shipments in the US during the third quarter.
The company's European shipments fell by 31pc to 765,000st in the third quarter after its integrated mill located in Košice, Slovakia, idled its #2 blast furnace in July due to depressed market conditions.
Flat-rolled steel shipments from integrated steelmaker US Steel's domestic operations remained flat during the third quarter.
The Pittsburgh-based steelmaker shipped 2.65mn st of flat-rolled steel in the third quarter, just 5,000st less than the same period of 2018. The result came as it and the rest of the North American steel industry faced headwinds from declining prices and a 40-day strike at General Motors (GM), a major North American steel consumer.
Tubular shipments fell by 5.4pc to 174,000st, while total third quarter steel shipments, comprising US and Europe operations, fell by 8.9pc to 3.59mn st.
US raw steel production has remained at elevated levels in 2019 after Section 232 steel tariffs of 25pc were levied on steel imports into the US in March 2018. Production in the US has increased by 5.4pc to 73.58mn st in the nine months ending 30 September compared to the same period of 2018.
The Argus weekly domestic US hot-rolled coil (HRC) index rose to $490.50/st ex-works Midwest on 29 October, the first increase since 3 September. Prices are down by 18pc since early August, and by 34pc since the beginning of the year.
Raw steel production at US Steel's flat-rolled segment fell by 5pc to 2.78mn st in the quarter, while European raw steel production fell by 32pc to 823,000st from a year earlier.
Capacity utilization in the third quarter for US operations declined by three percentage points to 65pc, while European utilization fell by 31 points to 65pc from a year earlier.
Third quarter US flat-rolled pricing declined by 15pc to $732/st, while prices at its European operations fell by 1.9pc to $656/st. Tubular prices fell by 12pc to $1,417/st.
US Steel also said today that it had completed its $700mn purchase of 49.9pc of EAF steelmaker Big River Steel. The financial impact of the acquisition will be seen in its fourth quarter results.
Related news posts
Hurricane Debby halts traffic at southeast US ports
Hurricane Debby halts traffic at southeast US ports
Houston, 5 August (Argus) — Major ports in the southeast US are closed to vessel traffic as Hurricane Debby made landfall today as a category 1 storm in northern Florida. Seaport Manatee and the port of Tampa Bay in Florida closed waterways on 3 August, with Seaport Manatee issuing port condition Zulu — where gale force winds are anticipated within 12 hours and port operations are suspended. Port Tampa Bay closed its shipping lanes on 3 August. Combined DAP and MAP exports from the port of Tampa reached 245,000 metric tonnes (t) between January and May — comprising nearly 91pc of year-to-date offshore export volumes — according to US Census Bureau data. Nearly two-thirds of US ammonium phosphate production capacity is consolidated in central Florida with Mosaic, according to The Fertilizer Institute (TFI) data. The Port of Savannah, in Georgia, will close today at 3:00pm ET and will remain closed on Tuesday before reopening on Wednesday, according to the Georgia Ports Authority. No vessel activity will be allowed during the closure. By Meghan Yoyotte Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US light vehicle sales bounced back in July
US light vehicle sales bounced back in July
Houston, 5 August (Argus) — Domestic light vehicle sales rebounded in July, rising to a seasonally adjusted rate of 15.8mn on the strength of greater car purchases. Sales of light vehicles — trucks and cars — increased from a seasonally adjusted annual rate of 15.2mn in June, the Bureau of Economic Analysis reported Friday. July's rate, the largest month-on-month gain since February, edged down from a 15.9mn unit rate in June 2023. US buyers continued to spend last month, as job and wage gains so far this year have been stronger than expected and as sentiment strengthened that the US Federal Reserve was on track with its monetary policy to achieve a "soft landing" — bringing down inflation without sending the domestic economy into a recession. However, a labor report released last week painted a bleaker economic picture, showing fewer job gains than expected in July and further gains in the unemployment rate. That spurred greater bets that the Fed would cut borrowing costs by 50 basis points at its September meeting, which should lower auto lending rates and boost auto sales. Still, recession fears may keep consumers from any big purchases in the near term. Sequential car sales rose by 9.1pc to a 3mn unit rate in July from a 2.75mn unit rate in June, while sales of light trucks rose by 3.1pc to a 12.8mn unit rate in July from 12.43mn unit rate in June. Domestic auto production dropped to a seasonally adjusted rate of 134,200 in June, down from May's 135,400. That compared with a 144,800 unit rate in June last year. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US services sector expanded in July, jobs grew: Survey
US services sector expanded in July, jobs grew: Survey
Houston, 5 August (Argus) — A measure of US services sector activity grew in July, showing the largest part of the economy expanded last month even as manufacturing contracted. The services purchasing managers index (PMI) rose to 51.4 in July from 48.8 in June, the Institute for Supply Management (ISM) said today. Readings above 50 signal expansion while those under that threshold signal contraction. Services, which account for more than two thirds of the economy, have contracted twice in the last four months, but only three times since early in the Covid-19 pandemic. The report, showing the largest part of the US economy has continued to expand, follows a report on 2 August from the Labor Department that showed only 114,000 jobs were generated in July , much fewer than expected, which sparked a sharp selloff in global stocks, oil and other commodities amid concerns of possible recession. Also last week, the Federal Reserve kept its target rate unchanged, but signaled a cut was likely in September. The business activity/production index in today's report registered 54.5 in July, compared with the 49.6 recorded in June. The new orders index expanded to 52.4 in July, from 47.3 the prior month. The employment index expanded for just a second time in 2024, rising to 51.1 in July from 46.1 the prior month. The report appeared to counter some of the concerns stemming from the July employment report. The prices index rose to 57 from 56.3. "Survey respondents again reported that increased costs are impacting their businesses, with generally positive commentary on business activity being flat or expanding gradually," ISM said. "Comments continued to express a wait-and-see attitude regarding the upcoming presidential election." The ISM services report today follows an ISM report last week showing manufacturing PMI for July fell to 46.6, the deepest contraction in manufacturing since last November, from 48.5 in June. It was the 20th contraction in 21 months. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
India faces tricky decision on steel imports
India faces tricky decision on steel imports
Mumbai, 5 August (Argus) — Indian steelmakers have ratcheted up calls for restrictions on imports from China and Vietnam to shield domestic industry from significant harm. But the decision on whether to impose anti-dumping duties or other curbs is likely to be a challenging one for the government, industry sources said. Major domestic mills have urged the government to limit flows from China, as elevated production levels and low local demand prompt the country's mills to keep exporting finished steel at prices significantly below those of domestic Indian material. India became a net importer of finished steel in the April 2023-March 2024 fiscal year, with shipments from China rising by 91pc on the year to 2.7mn t. In April-June this year, China shipped 572,000t of finished steel to India, an increase of 40pc on the year, according to data from the steel ministry's joint plant committee. The Argus fob China hot-rolled coil (HRC) index fell to a four-year low of $476/t at the end of July. HRC offers from China were last reported at $520/t cfr India, although trading firms said there was no buying interest yet at these levels. "China is not competitive. They lose money at these prices. It's predatory pricing, which is detrimental to the future of the industry in India," said Tata Steel's chief executive, TV Narendran, during the company's earnings call. JSW Steel and Jindal Power & Steel have also highlighted pressure from rising Chinese imports, as well as inflows from countries with which India has a free-trade agreement (FTA), such as Vietnam. Vietnam has been a main market for Chinese exports, and a dumping investigation could also be on the cards here. After rising in April and May, domestic Indian HRC prices have been on a downward trajectory, largely because of import bookings. The Argus weekly Indian domestic HRC assessment for 2.5-4.0mm material was 50,800 rupees/t ($603/t) ex-Mumbai on 2 August, excluding goods and services tax, a fall of Rs2,950/t compared with the end of May. No losses for steelmakers While domestic steelmakers' profits have come under pressure, sources say they have not been running into losses yet. JSW Steel's profit fell by 64pc on the year in the quarter ending 30 June, while Tata Steel's first-quarter profit after tax from its India operations declined by 33pc on the year. "The government should not wait for steelmakers to run into losses. Some action must be taken before that happens," an executive at a major Indian steel mill said. The Indian government last imposed anti-dumping duties on imported steel in 2017 , with the threshold for the landed cost of HRC at $489/t. This netted back to $430-440/t fob, an industry source said, adding that Chinese prices still have not fallen to this level yet. "If prices come precipitously close to the levels seen in 2016-17, there would be a definite problem," the source said. While imposing restrictions on imports could benefit Indian mills, any increase in steel prices would also mean additional costs for the infrastructure sector, sources said. The Vietnam question Several sources suggested that restrictions on Vietnamese steel would have a larger impact on domestic prices than curbs on China. Importers of Vietnamese steel do not incur additional duties on the landed price, unlike buyers of Chinese steel, because of India's FTA with ASEAN countries, including Vietnam. There is also talk that Chinese steel is rerouted to India through Vietnam. Finished steel exports from Vietnam to India more than doubled on the year to 737,000t in the 2023-24 fiscal year. Import bookings have increased since Vietnamese steelmaker Formosa Ha Tinh's export licence was renewed by the government's Bureau of Indian Standards (BIS) in May. Latest offers from Formosa were heard at $550/t cfr India. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more