US steel production falls by 10pc in last week
US raw steel production fell by nearly 10pc in the last week, with capacity utilization down to levels not seen since April 2017 as some mills began idling because of the coronavirus outbreak.
Total output fell by 182,000 short tons (st) to 1.67mn st during the week ended 28 March. Steel output fell by 13pc compared with the same week last year, according to the American Iron and Steel Institute (AISI).
Steel capacity utilization fell to 71.6pc in the latest week, down from 79.4pc in the prior week and 82.2pc in the same week a year earlier.
The production figures are the lowest since January 2017, while the capacity utilization rate is the lowest since April 2017.
Steel mills were hit with coronavirus-related automobile manufacturing shutdowns two weeks ago, with all US automakers announcing some level of shutdown as demand fell as local and state governments imposed shelter-in-place orders in an attempt to stem the spread of the disease.
Multiple flat rolled steel mills — primarily integrated steelmakers AK Steel, ArcelorMittal, and US Steel —announced idlings of a combined four blast furnaces in the US last week totaling more than 5mn st/yr of production.
Steel production in the south saw the biggest drop, falling by 73,000st to 645,000st. The Great Lakes was not far behind, with production declining by 69,000st to 608,000st.
Midwestern production fell by 29,000st to 155,000st, while northeastern production fell by 12,000st to 202,000st.
Production in the west rose by 1,000st to 60,000st.
Total US production so far this year fell by 228,000st to 23.65mn st compared with the same period last year, the first time this year that overall production has dipped below 2019's volumes. Average capacity utilization year-to-date was 80.7pc, compared with 81.6pc in the same period of 2019.
AISI's raw steel production tonnage is estimated and compiled using weekly data provided by 50pc of domestic producers and monthly data for the remainder.
Related news posts
Vietnam’s Vinfast cuts EV sales goal, delays US plant
Vietnam’s Vinfast cuts EV sales goal, delays US plant
Singapore, 15 July (Argus) — Vietnam-based electric vehicle (EV) manufacturer Vinfast Auto has lowered its 2024 EV delivery goal and delayed its North Carolina EV plant's first production by three years, because of economic headwinds. "We have adopted a more prudent outlook that is carefully calibrated to near-term headwinds, taking into full consideration the realities of market volatility and potential challenges," said the chairwoman of Vinfast's board of directors Le Thi Thu Thuy on 12 June. Vinfast now expects to deliver 80,000 EVs in 2024, down from the 100,000 units it set earlier this year and having missed its delivery goal of 40,000-50,000 last year. Vinfast delivered 21,747 EVs in January-June, almost doubling on the year, according to the company. Its EV sales over April-June stood at 12,058 units, up by 24pc on the quarter and 26pc on the year. It started building a $2bn EV factory in US North Carolina's Chatham county last year, with output scheduled to begin in 2025 . But the firm has now made the "strategic decision" to push it back to 2028, Vinfast said. VinFast earlier this year said that it would invest $2bn in south India's Tamil Nadu state to develop its EV sector, including building an EV plant that can produce 150,000 units/yr. The plant will be "opened" in the first half of 2025, said Vingroup's chairman Pham Nhat Vuong last month, adding that India will be Vinfast's biggest Asia market. The global battery and EV sectors have been facing various economic and geopolitical headwinds. This includes persistently elevated interest rates that are curbing consumer spending, and rising geopolitical market barriers starting with the US and EU's tariffs on Chinese EVs, as well as Canada looking into potential punitive duties on Chinese EVs. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Germany's Aurubis copper smelter back from maintenance
Germany's Aurubis copper smelter back from maintenance
London, 12 July (Argus) — Germany's Aurubis today announced that its Hamburg copper smelter returned to service on 11 July from the largest maintenance shutdown in the company's history that began 7 May. A restart is now under way following the €95mn 60-day maintenance that included an overhaul of the flash smelter, installation of heat exchangers in the contact acid plant, as well as the installation of a tap hold drill and tamping machine for improved safety of copper slag tapping. Hydrogen-ready anode furnaces were also installed as measures to improve sustainability. Investments in automation are set to improve efficiency and extend the frequency of planned maintenance rounds to three years from two. The Hamburg smelter's outage has exacerbated sulphuric acid tightness in Europe , and the operational restart is expected to provide some relief to the market. This comes in addition to the lack of availability of molten sulphur in the region, leading to shortages of sulphur burnt acid , which has prompted some consumers to replace burnt acid with smelter acid, lifting demand. Aurubis produced 1.19mn t of sulphuric acid during the first six months of the 2023-24 financial year (October-March), up by 1pc on the same period a year earlier. Output at Aurubis' Hamburg smelter rose by 11pc to 512,000t in the period, while output from the Pirdop smelter saw a 6pc decline on the period to 679,000t . For the first three months of the year, Aurubis produced 598,000t of acid, unchanged from the same quarter of 2022-23, as increased output at its Hamburg smelter offset a decline from Bulgaria's Pirdop plant. Production at Hamburg totalled 258,000t from January-March. By Maria Mosquera Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Australia’s BHP to import sulphuric acid for Lynas
Australia’s BHP to import sulphuric acid for Lynas
Singapore, 12 July (Argus) — Australian resources firm BHP has "affirmed its commitment to using reasonable efforts" to supply imported acid to Australia-listed mining company Lynas Rare Earths, Lynas said today. This comes after BHP announced a temporary suspension of its Western Australia nickel business from October, citing bearish expectations against nickel prices. Lynas has a supply contract with BHP Nickel West for the provision of sulphuric acid from the Kalgoorlie nickel smelter or imported sources to its Kalgoorlie rare earths processing facility, with the initial term until 30 June 2027. By Deon Ngee Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US, Mexico exempt Brazilian steel from new 232 tariffs
US, Mexico exempt Brazilian steel from new 232 tariffs
Sao Paulo, 11 July (Argus) — The US and Mexico will exempt Brazilian steel imported from Mexico from adjustments made to the US' section 232 tariffs. Steel imported from Brazil that is processed in Mexico then exported into the US will not be subject to tariffs, the Mexican external relations ministry said today, adding that "the melting and pouring requirements will not apply to products that come from [Brazil]." The US and Mexico jointly announced on Wednesday new import restrictions that will reinstate the 25pc and 10pc section 232 tariffs on some steel and aluminum imported from Mexico, requiring imported steel to be melted and poured in the US-Mexico-Canada free trade agreement (USMCA) region, while aluminum should not contain primary aluminum or be smelt or cast in Belarus, China, Iran or Russia. The new measures aimed at preventing Chinese steel from triangulating through Mexico, which both the administration and a bipartisan group of lawmakers have accused Mexico of allowing . The move is part of an effort from Mexico's government to avoid negative effects on the country's steelmaking sector, which is suffering because of a 50-day long strike at one of its key mills, ArcelorMittal's Lazaro Cardenas mill in the Michoacan state, that has cost the firm almost 500,000 metric tonnes (t) in lost production. Brazil is an important steel exporter to Mexico. In June, the South American country exported around 68,480t of slab to Mexico, more the double the amount from the same month in 2023, according to Brazil's ministry of development, industry and foreign trade data compiled by the Global Trade Tracker. Steelmakers that have greater exposure to selling products with less added value to units in Mexico to then be rolled there are the companies that tend to benefit the most from this situation, Genial Investimentos metals analyst Igor Guedes told Argus . By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more