Generic Hero BannerGeneric Hero Banner
Latest market news

China announces NEV development plan

  • Market: Metals
  • 12/10/20

China's state council has outlined a development plan for the country's new energy vehicle industry, aiming to accelerate technological innovation and infrastructure construction.

This comes after Beijing announced new development plans for strategic industries, including electric vehicles (EVs), new energy resources and technology infrastructure, in response to the impact of the Covid-19 economic downturn and trade tensions with the US.

The latest plan seeks to ensure a more orderly development of China's NEV sector, promote the establishment of a unified national market and boost industry integration and market competitiveness.

Infrastructure strategy

The government will encourage manufacturers to innovate and make technological breakthroughs in NEV operating systems and power batteries. Efforts to further integrate the new energy vehicle industry with the energy, transportation, information and communication sectors will also be supported.

Beijing announced at the end of September that it would reward innovations in the fuel cell electric vehicle (FCEV) industry, in an effort to make breakthroughs in key technologies and build a complete industry chain in four years.

The government wants to also speed up efforts to upgrade infrastructure, such as building more charging points and hydrogen refuelling stations. It will accelerate the formation of public networks to provide fast-charging services to NEV drivers near expressways and in urban and rural areas.

Several major cities in China have taken the lead in developing NEV infrastructure. Shanghai plans to add 100,000-200,000 of public and private NEV charging points over the next three years.

China's industry and information technology ministry announced a campaign in mid-July to promote the use of NEVs in rural areas. It added more NEV models to its campaign earlier this month, with more commercial vehicles to meet various needs.

International cooperation

The plan also aims to promote closer cooperation between Chinese NEV firms and international partners.

European carmaker Volkswagen invested in China's major battery manufacturer Gotion (Guoxuan) Hi-Tech and domestic automobile manufacturer Anhui Jianghuai Automobile in May.

US EV manufacturer Tesla is the only wholly owned foreign automaker in China, with its factory in Shanghai expected to meet a production target of 1mn units/yr in the longer term from current capacity of 200,000 units/yr.

Policy support

The Chinese government will come up with more supportive policies to promote the use of NEVs in the public service sector, according to the latest plan. It is aiming for at least 80pc of such vehicles to be used in areas such as public transport, taxi services and logistics in the country's "ecological civilisation" pilot zones, as well as in key regions to prevent and control air pollution.

China at the end of June revised its NEV credit score programme for 2021-23 to reshuffle the country's automotive manufacturing industry by encouraging more auto producers to produce EVs and reduce output of vehicles that run on fossil fuels.

The country's NEV production totalled 602,000 during January-August, down by 26.2pc from a year earlier, according to data from the China association of automobile manufacturers. Sales dropped by 26.4pc to 596,000 over the same period, with higher output in recent months outweighed by the overall impact from the Covid-19 pandemic.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/25

US consumer confidence down on policy angst

US consumer confidence down on policy angst

Houston, 28 March (Argus) — The University of Michigan's gauge of consumer sentiment fell in March to the lowest level since November 2022, led by a slump in expectations over the "potential for pain" from US economic policies introduced by the new administration. Sentiment fell to 57, down from 64.7 in February and 79.4 in March 2024, according to the University of Michigan's consumer sentiment survey released Friday. The final reading for March was lower than the preliminary reading. The sentiment index fell to a record low of 50 in June 2022 on inflation concerns. The index of consumer expectations fell to 52.6, the lowest since July 2022, from 64 in February and 77.4 in March last year. The expectations index has lost more than 30pc since November last year. "Consumers continue to worry about the potential for pain amid ongoing economic policy developments," the survey director Joanne Hsu said. The decline "reflects a clear consensus across all demographic and political affiliations: Republicans joined independents and Democrats in expressing worsening expectations … for their personal finances, business conditions, unemployment and inflation," Hsu said. Current economic conditions slipped to 63.8 in March from 65.7 in February and 82.5 last March. Two thirds of consumers expect unemployment to rise in the year ahead, the highest reading since 2009. Year-ahead inflation expectations jumped to 5pc this month, the highest reading since November 2022, from 4.3pc last month. The University of Michigan survey comes three days after The Conference Board's preliminary Consumer Expectations Index fell in March to its lowest in 12 years, to below a threshold that "usually signals" a recession. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

UK steel importers oppose other countries' caps


28/03/25
News
28/03/25

UK steel importers oppose other countries' caps

London, 28 March (Argus) — Steel importers in the UK suggest the imposition of a cap on any other countries' quotas could effectively stop trade, given the small volume of the quotas. In a recent submission to the Trade Remedies Authority, UK Steel said 15pc caps should be introduced on other countries quotas for hot-dip galvanised, plate and rebar. But in its submission to the TRA, trading firm Salzgitter Mannesmann argues that any cap based on a percentage of the quota "will ultimately most likely remove rather than reduce imports as shipments from many third countries, notably the far east, require a certain base volume to ship economically to the UK". Other trading firms and service centres told Argus they share the same view. Salzgitter Mannesmann also suggested a new country quotas for individual importers be added to the safeguard based on their imports over the past two or three years. The only local producer of hot-dip galvanised coil, Tata Steel, would be likely to argue against this as volumes from some countries, notably Vietnam, have increased dramatically in recent years. Salzgitter Mannesmann also suggests Tata Steel cannot produce hot-rolled coil over 1.85m wide, for which the UK has to totally rely on imports. Traders have for some time argued that there should be no import constraints on material, such as 2m wide, as there can be no injury to the producer on grades it cannot produce. Service centre Sebden Steel said the current measures make it "impossible" for the UK to be flooded with cheap foreign imports, and that people are "misinformed by mainstream media and UK Steel". "The UK producer is in a safe place already and any additional measures will only serve to cause injury to independent steel service centres, independent steel stockholders and the UK manufacturing base, which will all be faced with a further tightening of the supply chain and increased costs," it said. Importers, unsurprisingly, question why Tata Steel, now a re-roller until its electric arc furnaces are installed, can import on much more favourable terms than others. Tata has a much bigger quota than the rest of the market, at around 2.3mn t, but the main problem for importers is that the company has fewer constraints on where it can source, with only a 40pc cap on any given country within that quota. Independent service centres, which all compete with Tata Distribution, can only import much smaller quantities from different locations, given the fragmented composition of quotas; the other countries quota for 1A, for example, is less than 100,000 t/yr. EU mills have far and away the largest quota to sell 1A HRC into the UK, but given their higher costs compared with Asian producers, they struggle to compete; Tata's imports come from all over the world, as well as some from its sister mill in IJmuiden, the Netherlands. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Australia's Aurelia Metals to boost Cu, Zn processing


28/03/25
News
28/03/25

Australia's Aurelia Metals to boost Cu, Zn processing

Perth, 28 March (Argus) — Australian metal producer Aurelia Metals is set to triple mixed metal ore processing capacity of ore from its Federation mine, after authorities in New South Wales state approved a project consent change. Aurelia produces mixed metal ore at its 600,000 t/yr Federation mine. It then hauls ore to its nearby Peak processing centre to produce a range of base and precious metals, including zinc, copper, lead, and gold. The company has been allowed to move only 200,000 t/yr of ore between its two NSW sites since Federation opened in mid-2024, because of consent restrictions. But the latest change allows it to move 600,000 t/yr of ore to Peak, the company announced on 28 March. Aurelia's updated consent comes as it continues to ramp up production at Federation. The company only processed 16,500t of Federation ore in October-December 2024, recovering 55t of copper, 626t of lead, 1,263t of zinc, and 502oz of gold. Aurelia is increasing its base metal production capacity, despite other Australian producers doing the opposite. Australian metal firm IGO paused its Forrestania nickel project in July-September 2024, and will close its Nova copper and nickel mine in 2027. But this phenomenon is not unique to Australia. Global metal producer Glencore cut its total copper output by 6pc in 2024, following planned production declines in Chile and Peru, and unplanned disruptions in the Democratic Republic of Congo. Copper prices have been quite volatile over the last year. The London Metal Exchange's (LME) copper cash price stood at $8,696/t on 27 March 2024, before bouncing between a high of $10,857/t and a low of $8,620/t over the next 12 months. LME's copper price stood at $9,787/t on 27 March. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Recent deep-sea and short-sea cfr Turkey scrap deals


27/03/25
News
27/03/25

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 27 March (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 21-Mar 40,000 383 (80:20) April Izmir USA HMS 1/2 85:15, shred, bonus Y 18-Mar 30,000 376 (80:20) April Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 18-Mar 40,000 381 (80:20) April Iskenderun USA HMS 1/2 80:20, shred, bonus Y 18-Mar 40,000 380 (80:20) April Marmara Baltics/Scan HMS 1/2 80:20, shred, bonus Y 17-Mar 30,000 375 (80:20) April Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Mar 30,000 380 (80:20) April Marmara USA HMS 1/2 80:20, shred, bonus Y 13-Mar 30,000 382 (80:20) April Iskenderun USA HMS 1/2 95:5, shred Y 13-Mar 30,000 380 (80:20) April Izmir USA HMS 1/2 80:20, shred Y 13-Mar 30,000 375 (80:20) April Izmir Cont. Europe/UK HMS 1/2 80:20, shred Y 13-Mar 30,000 380 (80:20) March Iskenderun USA HMS 1/2 80:20, shred Y Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 24-Mar 3,000 353 April Izmir Romania HMS 1/2 80:20 Y 24-Mar 3,000 351 April Bartin Romania HMS 1/2 80:20 Y 21-Mar 5,000 370 April Izmir Greece HMS 1/2 80:20 Y 21-Mar 6,000 369 April Marmara Italy HMS 1/2 80:20, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

AM/NS India to set up first scrap processing unit


27/03/25
News
27/03/25

AM/NS India to set up first scrap processing unit

Mumbai, 27 March (Argus) — Indian steelmaker ArcelorMittal Nippon Steel (AM/NS) commissioned its first scrap processing facility at Khopoli in western India's Maharashtra state. The 120,000 t/yr facility is the first of four scrap processing units planned by AM/NS to increase supply of domestic scrap. The unit is expected to be operational this year. AM/NS, which has a crude steel capacity of 9mn t/yr, has targeted increasing the scrap mix in its steelmaking from 3-5pc at present to over 10pc by 2030. The company said it can reduce conversion and logistics costs by processing scrap at its own units, instead of procuring it through a complex supply chain where scrap moves from local collectors to scrapyards to consumers. The Indian government has been pushing for higher domestic scrap production to reduce reliance on imports and aid decarbonisation efforts. A vehicle scrappage policy is currently in place, while the government in its financial year 2025-26 budget also outlined measures to boost scrap production through shipbreaking. Still, scrap production has been falling short of the industry's requirements and domestic scrap availability needs to increase, according to market sources. India's scrap imports fell last year as demand faltered and fluctuated and government spending failed to meet expectations. Scrap imports in the south Asian country stood at 8mn t in 2024, falling by just over 20pc from 10.2mn t the previous year, according to customs data. Earlier this year, the rupee's decline to a record low against the US dollar also made imported scrap unviable for many customers, including secondary scrap-based steelmaking units. AM/NS has set aside 3.5bn rupees ($40.8mn) towards a scrap production scheme. About 65pc of the company's steelmaking capacity uses the gas-based direct reduced iron-electric arc furnace (DRI-EAF) route, it said. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more