Viewpoint: US PP supported by tight propylene in 2021
US polypropylene (PP) contract prices are expected to remain higher for much of the first quarter of 2021 as ongoing tight supplies, strong demand and feedstock limitations allow producers to hold onto recent margin gains.
PP producers were able to push through 6¢/lb of margin expansion in September-November and are finding acceptance of an additional 4¢/lb margin increase for December. Additional increases have been announced for January, as buyers are still struggling to find the resin they need to meet increased demand.
With ongoing PP maintenance problems and feedstock supply shortages caused by reduced refinery operations, propane dehydrogenation unit outages and less byproduct propylene coming from ethylene crackers running lighter feeds, the tight supply conditions are expected to continue well into the first quarter.
Market participants are counting on higher propylene prices, which reached two-year highs in December, to drive more propylene production from refineries and crackers, but that will take some time. In the meantime, the market is trapped in a cycle of short propylene supply driving propylene prices higher and limiting PP production, which is driving PP prices even higher.
Further compounding the tight supply situation is strong demand, with applications such as furniture, rigid packaging and textile applications used for personal protective equipment and medical applications experiencing double-digit growth in 2020. Other applications, such as compounding and injection molding related to automotive demand are still showing steep year-to-date declines due to factory slowdowns at the beginning of the pandemic, but have experienced rapid demand improvement in the last quarter as those factories ramp up production.
Producer inventories were depleted by heavy exports during the first wave of pandemic-related shutdowns and then by multiple hurricane-related shutdowns, leaving PP stocks at the lowest levels since January 2013. With no sign of a slowdown in demand, producers will find it difficult to replenish inventories.
"We are running on fumes when it comes to inventory, and demand is just so high," said one US producer.
Imports, which in recent years have been used to help offset short supply in the US, have been less of a factor in 2020 because of high international PP prices as well as freight rates from Asia, which have in some cases more than doubled due to container and vessel shortages. In 2020 through October, US PP imports were down by 41pc from the same period in 2019, according to data from the US International Trade Commission.
Even the addition of the 450,000 t/yr Braskem plant in La Porte, Texas, which came online in September, has done little to rebuild inventories, as the new production has only served to offset production losses elsewhere in the US.
But once propylene supply increases, PP operating rates should improve. If demand begins to decline by the second quarter of 2021, as many market participants are expecting, the US market should return to better balance. By the second half of 2021, the US could again face an oversupply that narrows PP margins.
Related news posts
Japan’s Resonac to optimize petchem business
Japan’s Resonac to optimize petchem business
Tokyo, 23 July (Argus) — Japanese petrochemical producer Resonac plans to optimize part of its petrochemical business by creating a new wholly-owned subsidiary by 1 August. Resonac decided on 23 July to set up Crasus Chemical, which will take over production of basic petrochemical goods from Resonac. It aims to set up the subsidiary as an independent, listed company to clarify and facilitate performance evaluations and to simplify a chain of command to speed up decision making. Resonac plans to achieve quicker decarbonization of its petrochemical production and to enhance competitiveness and profit growth. Crasus will be in charge of manufacturing and selling basic petrochemical goods like ethylene and propylene, goods made from acetic acid and synthetic resins. Resonac owns the 618,000 t/yr Oita ethylene cracker in south Japan's Oita prefecture that will will also be transferred to Crasus. Petrochemicals has accounted for around 20pc of Resonac's sales revenues. Japan's petrochemical firms have attempted to optimize their businesses with intensifying international competition and shrinking domestic demand. Mitsubishi Chemical has also tried to reorganize its basic petrochemical business, although it has yet to announce firm plans. By Nanami Oki Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US House to vote on waterways bill
US House to vote on waterways bill
Houston, 22 July (Argus) — The US House of Representatives is expected to vote on 22 July on a waterways bill that would authorize new infrastructure projects across ports and rivers. The Water Resources Development Act (WRDA) is renewed typically every two years to authorize projects for the US Army Corps of Engineers (Corps). The bipartisan bill is sponsored by representative Rick Larsen (D-Washington) and committee chairman Sam Graves (R-Missouri). The full committee markup occurred 26 June, where amendments were added, and the bill was passed to the full House . A conference committee will need to be called to resolve the different versions of the bill. The major difference between the bills is that the House bill does not include an adjustment to the cost-sharing structure for the lock and dam construction and other rehabilitation projects. The Senate Committee on Environment Public Works passed its own version of the bill on 22 May, with all members in favor of the bill. The House version of the bill approves modifications to the Seagirt Loop Channel near the Baltimore Harbor in Maryland, along with 11 other projects and 160 feasibility studies. One of these studies is a $314.25mn resiliency study of the Gulf Intracoastal Waterway, which connects ports along the Gulf of Mexico from St Marks, Florida, to Brownsville, Texas. By Meghan Yoyotte Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Mitsubishi, Neste aim to boost bio-naphtha supplies
Mitsubishi, Neste aim to boost bio-naphtha supplies
Tokyo, 16 July (Argus) — Japanese trading house Mitsubishi and Finnish refiner Neste plan to boost sales of Neste's biomass-based naphtha by enhancing their partnership in Japan. The companies signed a partnership agreement on an unspecified date, aiming to co-operate on prompting a switch from conventional petroleum naphtha to Neste's bio-naphtha. They plan to encourage Japanese downstream companies or users of petrochemical goods and plastics, like food and beverage suppliers, apparel firms and electric appliance manufacturers, to introduce bio-naphtha into their supply chains. Mitsubishi and Neste have already partnered on delivering bio-naphtha to produce renewable paraxylene for Japanese consumers Goldwin and Suntory . Japanese companies are increasingly attempting to incorporate bio-naphtha for their decarbonisation strategies. Japanese petrochemical producer Resonac has produced biomass-based olefins like ethylene and propylene since June by purchasing bio-naphtha from Neste. Fellow petrochemical producer Mitsui Chemicals bought bio-naphtha from Neste to process it at its Osaka cracker. Idemitsu and Toray have been partnering to produce styrene monomer and acrylonitrile butadiene styrene resin from bio-naphtha. Japan imported 6mn t of petroleum naphtha during January-May, down by 5.9pc from the same period in 2023, according to finance ministry data. By Nanami Oki Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US Gulf polymer plants restarting following hurricane
US Gulf polymer plants restarting following hurricane
Houston, 12 July (Argus) — Some US Gulf Coast polymer plants and rail lines are resuming operations following shutdowns as a result of Hurricane Beryl earlier in the week. Multiple polyethylene (PE) and polypropylene (PP) units shut down pre-emptively before the storm, which came ashore in Matagorda, Texas, on 8 July, and many are still in the process of restarting. Formosa Plastics had pre-emptively shut down operations at its Point Comfort, Texas, site, but did not receive any major damage from Hurricane Beryl. The site, including approximately 1.8mn t/yr of PE and 917,000 t/yr of PP production, is in the process of resuming operations with the end of next week as the target date for a complete return, the company said in a statement. The status of multiple other PE and PP units in the region was not immediately available. Companies including Dow, Ineos, Braskem America, and LyondellBasell, which all had some units shut down during the storm, did not immediately respond to requests for operational updates. In addition to plant outages, polymer producers had been experiencing transportation issues earlier in the week due to flooding, but the repair of Union Pacific's lines in the Galveston area yesterday has allowed rail operations to resume, according to a statement from the company. It will take several days to work through the remaining train congestion, and widespread power outages will likely continue to cause delays throughout the impacted area. By Cole Sullivan Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more