Generic Hero BannerGeneric Hero Banner
Latest market news

Ukraine extends scrap export duty for five years

  • Market: Metals
  • 30/04/21

Ukraine's parliament has approved a bill to extend the country's ferrous scrap export duty for another five years to September 2026. President Vladimir Zelensky has not yet accepted or rejected the bill.

Ukraine's scrap export duty was a point of contention when the country was working towards joining the World Trade Organisation (WTO), which it finally did at the beginning of 2008. The EU refused to endorse Ukraine's WTO membership unless the country agreed to reduce or remove its scrap export duty, which was at €35/t at the time. Ukraine subsequently agreed to cut the duty to €10/t for six years from the date of accession.

Ukraine increased its ferrous scrap export duty to €30/t in September 2016 and gradually increased it to the current level of €58/t in September 2019. An extension of the duty at the current price was submitted in early March, following discussions at the beginning of this year and a request from Ukrainian steelmakers in mid-February. The parliament's committee on environmental policy and management endorsed the extension proposal in early April.

The parliament said that an extension to the current duty system is required to limit scrap exports and support shipments to domestic steelmakers. And if the duty is removed, steelmakers may face a scrap shortage of around 23pc in a year's time. The introduction and gradual increases of the export duty reduced the domestic scrap shortage to zero in 2018 from 300,000t in 2017 and around 600,000t in 2015, demonstrating the need for the export duty, parliament said.

It estimated that the extension will create a fiscal revenue of around 1bn hryvnias/yr ($36mn/yr), because "scrap remade into finished steel products and then exported costs more than just exported scrap".

But scrap market participants disagreed with the economic rationale of the extension. Domestic scrap collection decreased by almost 39pc in 2015-20 to just above 3mn t from 4.3mn t. And scrap exports collapsed to just 26,400t from 1.21mn t over 2015-20, while delivery to steelmakers fell to 2.89mn t from 3mn-3.32mn t. This suggests that the elimination of the scrap shortage was the result of mills' lower requirements amid falling steel output and demand rather than reduced exports (see table)

. The number of scrap recycling companies in Ukraine fell to 900 today from around 1,800 in 2015, industry association UAVtormet said.

Meanwhile, higher scrap prices and robust trading activity supported Ukrainian scrap prices in the first quarter of this year, market participants said. The country's ferrous scrap exports more than quadrupled on the year to 49,000t in January–March. The rise in seaborne scrap prices made export shipments more attractive to suppliers, despite the export duty, and forced Ukrainian mills to pay higher prices in the domestic market.

The increase in domestic prices lifted steelmakers' receipts of ferrous scrap by 23.1pc on the year to 837,700t in January-March — far exceeding their scrap requirements as the country's steel production dipped by 0.5pc year on year to 5.29mn t in the first quarter. Ukraine's scrap collection also increased to 930,000t in January-March, up by 28.2pc on the year.

Besides Ukraine, Russia has also made plans to implement stricter export restrictions for scrap while Kazakhstan reinstated a ban on exports by truck. Both countries' restrictions were introduced after intensive lobbying by steelmakers despite protests from the scrap recycling industry.

Ukraine's steel output and shipmentst
20202019201820172016±% 2020/2016
Production
Crude steel20,616,00020,748,00021,000,00021,417,00024,236,000-14.9
Pig iron20,423,00020,066,00020,560,00020,147,00023,612,000-13.5
Rolled steel products18,427,00018,214,00018,361,00018,441,00021,490,000-14.3
Shipments
Domestic3,676,0003,278,0003,946,0003,856,0003,781,000-2.8
Imports1,227,9001,419,0001,442,0001,302,0001,056,20016.3
Consumption4,903,9004,697,0005,388,0005,158,0004,837,2001.4
Exports14,751,00014,936,00014,415,00014,585,00017,709,000-16.7

Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
05/05/25

US vehicle sales slip in April from 4-year high

US vehicle sales slip in April from 4-year high

Houston, 5 May (Argus) — Domestic sales of light vehicles in April slipped from a four-year high the prior month but still reflected robust purchasing ahead of planned implementation of more US tariffs on the automotive industry. Sales of light vehicles — trucks and cars — dipped to a seasonally adjusted rate of 17.3mn units in April, down from 17.8mn in March, the Bureau of Economic Analysis reported today. Last month's total still was above April 2024's annualized rate of 16mn and was the second-highest monthly reading since April 2021. US consumers maintained steady purchasing last month in a rush to beat 25pc tariffs on imports of vehicle parts that were set to be implemented on 3 May. Those higher duties are expected to raise input costs for domestic automakers, and thus, prices for buyers. US president Donald Trump early last week signed an order that allows vehicle manufacturers to partially recoup tariff-related costs, helping to ease the burden. Still, Trump maintained his goal of forcing US automakers to become wholly reliant on auto parts made in the US. Trump already instituted 25pc tariffs on imports of foreign-made vehicles on 3 April. Tariff-related pressures have dented US consumer sentiment and weighed on domestic manufacturing activity, but certain pockets of the economy have shown resilience such as the services industry and employment. Truck sales last month fell by 1.9pc sequentially to 14.4mn unit rate, while car sales dropped by 8.8pc to a 2.9mn unit rate. Domestic vehicle production fell to a seasonally adjusted annual rate of 10.07mn from an upwardly revised 10.09mn in February, according to US Federal Reserve data. That compares with 11.08mn in March 2024. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Ford expects $1.5bn tariff hit in 2025


05/05/25
News
05/05/25

Ford expects $1.5bn tariff hit in 2025

Pittsburgh, 5 May (Argus) — Ford expects tariffs to cost the US automaker about $1.5bn in profit this year, causing the firm to withdraw its full-year financial guidance today. Tariffs and the uncertain rollout of potential changes to those tariff caused the Dearborn, Michigan-based company to suspend its 2025 guidance, which was initially projected at $7bn-8.5bn in earnings before interest and taxes. US president Donald Trump has place 25pc import taxes on vehicles, steel and aluminum, placing immense pressure on US automakers, many of whom have operations in Mexico and Canada. Ford is the third major US automaker to rescind its financial guidance in the past week following similar decisions by Stellantis and General Motors . By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Mexico's manufacturing contraction deepens in April


05/05/25
News
05/05/25

Mexico's manufacturing contraction deepens in April

Mexico City, 5 May (Argus) — Activity in Mexico's manufacturing sector shrank for a 13th straight month in April, with declines accelerating in production and new orders, according to a survey of purchasing managers. The manufacturing purchasing managers' index (PMI) fell to 45.5 in April from 46.9 in March, finance executives' association IMEF said, moving further below the 50-point threshold that separates growth from contraction. US tariffs imposed since March are adding pressure to Mexico's manufacturing sector, which makes up about a fifth of the national economy. The auto industry, responsible for roughly 18pc of manufacturing GDP, may be the hardest hit by the new measures, including a 25pc tariff on auto parts that took effect 3 May. Mexico remains the top exporter of vehicles to the US, supplying 23pc of all US auto imports in 2024. But IMEF said tariffs compound broader, mostly domestic headwinds, including reduced public spending and investor uncertainty stemming from sweeping legal and regulatory reforms. New investment has stalled since late 2024. The PMI index for new orders fell by 2.5 points to 41.8, the lowest since June 2020. Production dropped by 2.5 points to 43.6, while employment fell by 0.6 point to 46.4. New orders and production have now been in contraction for 14 straight months, and employment for 15. Inventories saw the steepest drop in April, falling 4 points to 46.3 — sliding from expansion to contraction — as manufacturers accelerated shipments after tariff implementation dates were confirmed. IMEF's non-manufacturing PMI — which covers services and commerce — remained in contraction for a fifth consecutive month but edged up by 0.5 points to 49.0 in April. Within that index, new orders rose by 0.6 points to 48.1, employment increased 1.3 points to 48.6 and production held steady at 47.5. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Australia's Labor win may aid low-carbon Fe, Al sectors


05/05/25
News
05/05/25

Australia's Labor win may aid low-carbon Fe, Al sectors

Sydney, 5 May (Argus) — The Australian Labor party's victory in the country's 3 May parliamentary election could support low-carbon iron and aluminium developers, providing policy clarity and public capital to the sectors. Labor's victory provides more certainty around Australia's A$14bn ($9.06bn) green hydrogen subsidy scheme, which will help steel producers transition towards hydrogen-powered steel furnaces. The opposition Coalition during the election pledged to scrap the programme, which will allow producers to claim A$2/t of green hydrogen produced from 2027. Australian steelmaker NeoSmelt and South Korean steelmaker Posco are developing electric iron smelters in Western Australia (WA) that produce hot-briquetted iron, which is used in the green steel process. Both projects will initially rely on natural gas but may transition to hydrogen-based processing as hydrogen production rises. Australia's hydrogen tax credits may prove crucial given ongoing hydrogen production challenges. South Australia's state government closed its Office of Hydrogen Power SA on 2 May, following a funding cut earlier this year. Labor can now also move forward with plans for A$2bn in low-emissions aluminium production credits, beginning in 2028-29. Smelters will be able to claim credits per tonne of low-carbon aluminium produced, based on their Scope 2 emission reductions. The party's proposal does not include any blanket credit for producers. Labor's aluminium production credits are aimed at supporting the Australian government's goal of doubling the country's share of renewable power from about 40pc to 82pc by 2030. Australian producers export about 1.5mn t/yr of aluminium, according to industry body Australian Aluminium Council, from four smelters located around the country. Green iron funding Labor's election win also secures its A$1bn lower-emission iron support pledge , first announced in late February. Half of the fund will go towards restarting and transitioning the 1.2mn t/yr Whyalla steelworks in South Australia into a green steel plant. The other half will support new and existing green iron and steel projects to overcome initial funding barriers. Labor has not allocated any funding through the programme yet. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Cliffs to idle 3 US steel mills this summer


02/05/25
News
02/05/25

Cliffs to idle 3 US steel mills this summer

Houston, 2 May (Argus) — Integrated steelmaker Cleveland-Cliffs will indefinitely idle its Conshohocken, Riverdale, and Steelton steel mills this summer in response to weak demand for the products produced at the mills. The idlings will impact about 950 workers spread across the 700,000 short ton (st)/yr Riverdale high-carbon coil mill in Illinois, the 500,000st/yr Conshohocken specialty plate mill in Pennsylvania and the 300,000st/yr Steelton, Pennsylvania railroad rail mill, a company spokesperson told Argus . Cliffs said the moves are temporary and will begin at the end of the required 60-day WARN notice periods in their respective states — on or about 30 June. By Marialuisa Rincon Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more