Steel decarbonisation gathers speed
The announcement within the last week of over 6mn t/yr of new direct-reduced iron (DRI) capacity and five new electric arc furnace (EAF) sites by the early 2030s suggests that conditions are becoming increasingly favourable for low-carbon steelmaking.
German steelmaker Salzgitter will fully move to hydrogen and renewable energy-based DRI-EAF steelmaking by 2033. It will award construction projects for industrial facilities by the end of this year.
ArcelorMittal announced further DRI and EAF capacity in France, including 2.5mn t/yr of DRI-EAF capacity at Dunkirk and an EAF unit at Fos-sur-mer to be fed by scrap, requiring a total investment of €1.7bn ($1.94bn). This brings the steelmaker's total DRI capacity plans for 2030 to roughly 10.8mn t/yr, including projects in Spain, Belgium, Germany and France.
Swedish steelmaker SSAB announced last week that it would do the same, bringing forward plans for almost 3mn t/y of EAF capacity at Lulea, Sweden, and Raahe, Finland, to 2030 from 2030-45.
ETS phase-out incentivises decarbonisation
The timing of steelmakers' decarbonisation plans suggests that EU policy on carbon costs is having the desired push effect towards greener steelmaking. While so far only pilot-scale hydrogen-based steel projects are operational, several industrial-scale projects are planned to come on line around 2026, when the ETS-CBAM transition begins, and over 30mn t is planned by 2033, after the phase-out is to be completed in 2030.
The phase-out of free allowances under the EU emissions trading system (ETS) and the introduction of a carbon border adjustment mechanism (CBAM) over 2026-30 in theory provides protection for low-carbon steelmaking in the EU, while removing the incentive for steelmakers to cut costs by continuing to use coal or gas as an energy source. And the threat of paying over €80/t in carbon costs is an important incentive for EU steelmakers to decarbonise. But European steel association Eurofer argues that the EU should continue to grant free emissions throughout the whole ETS-CBAM transition phase to mitigate the carbon costs that steelmakers will bear, alongside the considerable investment costs of reducing emissions by 30pc by 2030, estimated by Eurofer to be around €25bn. "The combined effect of the huge investment needed to decarbonise — and also [of] simply cutting emissions by cutting production, which is inevitable given the existing technology, plus skyrocketing energy prices and rising production costs will put enormous and unsustainable pressure on our members," Eurofer director of market analysis Alessandro Sciamarelli said. Eurofer estimates the cost to the industry in 2030 will be €14bn at today's emissions levels or €8.4bn presuming a 30pc emissions reduction.
Cross-sectoral relationships pivotal
The EU plans to have 6GW of renewable hydrogen electrolyser capacity by 2024, and 40GW by 2030, as well as 40GW of production available for import from outside the EU by 2030. But partnership with companies in upstream and downstream sectors have been determining factors for steelmakers assessing the viability of hydrogen-based DRI-EAF steelmaking.
Salzgitter and Danish energy provider Orsted aim to establish a circular supply chain, within which Salzgitter will supply renewably-produced steel, largely for use in the construction of wind farms, and Orsted will supply renewable (wind-generated) energy, as well as returning windmill parts to Salzgitter as low-CO2 scrap at the end of their life span. The company aims to increase the amount of scrap it uses by 50pc to 3mn t/yr by 2033. Salzgitter will also supply low-CO2 steel to all of carmaker BMW's European plants from 2026 onwards.
ArcelorMittal recently added to its investments in the renewable energy sector, committing $100mn to sustainable energy-focused investment fund Breakthrough Energy, and $5mn to Israel's H2Pro, a company that has developed E-TAC (Electrochemical — Thermally Activated Chemical) technology that splits water into hydrogen and oxygen in a process similar to electrolysis.
For SSAB, the abundance of hydroelectric and wind power in northern Sweden has played an important part in allowing the steelmaker to fully commit renewable-powered EAF production within the next eight years, as has its partnership with iron ore mining firm LKAB and energy provider Vattenfall.
Further progress by steelmakers in forming supply or offtake partnerships might encourage further decarbonisation commitments in the near future. German steelmaker Dillinger-SHS has an initial agreementwith engineering company Paul Wurth and steelmaker Liberty to develop a 2mn t/yr DRI plant including 1GW of hydrogen electrolysis capacity at Dunkirk. The steelmaker is also working with seven energy and engineering companies to develop a "hydrogen economy" in the German Saar region, the French Lorraine region, and the state of Luxembourg by producing 61,000 t/yr of hydrogen and investing €600mn in production facilities and transport infrastructure.
![](https://public-assets.argusmedia.com/2022/02/07/greensteelprojectsmap07022022033121.jpg)
Related news posts
South Korea to require use of SAF for flights from 2027
South Korea to require use of SAF for flights from 2027
Singapore, 30 August (Argus) — South Korea said it plans to require all international flights departing from its airports to use a mix of 1pc sustainable aviation fuel (SAF) from 2027. This comes as more countries are adopting SAF mandates in accordance with the Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA). Singapore earlier this year announced a 1pc SAF blending mandate from 2026 , with plans to increase to 3-5pc by 2030, subject to global developments and wider SAF availability and adoption. The Ministry of Trade, Industry and Energy and the Ministry of Land, Infrastructure and Transport announced the 'SAF Expansion Strategy' on 30 August, which includes a target for South Korea to capture 30pc of the global blended SAF export market. While not explicitly stated in the statement, some South Korean refineries expect co-processed SAF to be allowed to meet the country's mandate, sources said. This is important as the country already produces small quantities of SAF via co-processing at existing refining facilities, with three of South Korea's four domestic refineries planning to produce SAF through co-processing by the end of this year . Key strategies The ministries outlined three key strategies to achieve the SAF consumption target — gradual expansion of domestic SAF demand, ensuring a stable domestic supply capacity, and establishing a SAF-friendly legal and institutional environment. Airlines can already refuel with SAF at Korean airports, making South Korea the 20th country to do so as part of their plan to increase domestic SAF demand. The country had tested six flights using 2-4pc imported blended SAF between South Korea and Los Angeles since August 2023. An incentive system is being developed to encourage public and private adoption of SAF, with benefits such as preferential allocation of transport rights, reduced airport facility usage fees and the introduction of airline carbon mileage system for passengers and other benefits. A mid- to long-term roadmap for the gradual expansion of domestic SAF demand will be prepared in early 2025, the ministries said. The country's strategy to secure stable domestic supply capabilities includes considering investment support for domestic SAF production such as tax credits. South Korea's four domestic refineries already plan to invest 4 trillion won ($3bn) in renewable fuels, including SAF by 2030, the ministries said. The government estimates a Hydrotreated Esters and Fatty Acids (HEFA) SAF plant with a production capacity of up to 250,000 t/yr will require an investment of approximately W1 trillion. The supply-side strategy also aims to ease regulations on waste recycling to increase the availability of domestic feedstocks for SAF production. Another strategy is to diversify feedstock and SAF production technology options, with pre-testing expected later this year. The government plans to explore alternative feedstock like microalgae and production pathways such as e-SAF, with a view to developing supply chains. South Korea plans to establish a national standard, certification and testing method for SAF with preparation planned for December 2024. By Deborah Sun Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Fortescue hold firms on 2024-25 iron ore target
Fortescue hold firms on 2024-25 iron ore target
Beijing, 30 August (Argus) — Australian iron ore producer Fortescue has reiterated its iron ore shipment target for the 2024-25 fiscal year ending 30 June of 190mn-200mn t, including 5mn-9mn t from its Iron Bridge project on a 100pc basis. The Iron Bridge magnetite project in Western Australia shipped its first cargo in July last year, with Fortescue's iron ore shipments totalling 191.6mn t for the full year . It had targeted to ship 192mn-197mn t for 2023-24. The company achieved a hematite average revenue of $103/dry metric tonne (dmt), up by 9pc on a year earlier. Hematite C1 costs for 2023-24 rose by 4pc from the previous year to $18.24/wet metric tonne (wmt) because of higher labour rates and mine plan driven cost escalation, although Fortescue said its cost control measures offset the partial increase. It forecasts hematite C1 costs for 2024-25 to rise to $18.50-19.75/wmt. The Argus ICX seaborne iron ore fines assessment for 62pc Fe cfr Qingdao averaged $119.40/dmt for 2023-24. Fortescue is on track to achieve real zero, or no fossil fuels and no offsets, for its scope 1 and 2 terrestrial emissions across its Australian iron ore operations by 2030. It is aiming to achieve this with building a new solar farm, deployment of electric excavators and the use of battery electric and hydrogen fuel cell haul truck prototypes. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US OCTG, line pipe imports fall in July
US OCTG, line pipe imports fall in July
Houston, 29 August (Argus) — Preliminary data from the US Department of Commerce shows that imports of oil country tubular goods (OCTG) and line pipe products fell in July. OCTG volumes fell by 88,100 metric tonnes (t) from the prior year, as volumes from Japan dropped by 15,500t, South Korea and Thailand both dropped by 13,500t, and volumes from Vietnam and Mexico fell by 11,300t and 9,300t, respectively. Volumes of line pipe less than or equal to 16in fell by 12,300t, as Italian volumes dropped by 4,500t, Ukraine dropped to zero from 4,400t in the prior year, and Brazilian volumes fell by 3,100t. Standard pipe imports increased by 13,400t on a 7,900t increase from Turkey. Heavy structural shape volumes jumped by 39,700t as Spanish volumes increased by 21,700t from the prior year, and imports from Germany rose by 9,200t. By Rye Druzchetta US pipe and tube imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 OCTG 95,792 183,909 -88,117 -47.9% 126,760 Line pipe 69,387 80,875 -11,488 -14.2% 87,976 Standard 66,100 52,716 13,384 25.4% 76,317 Heavy Structural Shapes 107,979 68,253 39,726 58.2% 54,096 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Line pipe is all diameters. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Higher flats volumes lead US steel imports up
Higher flats volumes lead US steel imports up
Houston, 29 August (Argus) — Higher volumes of flat steel imports led overall US steel imports higher in July. Total US steel imports for consumption were 2.2mn metric tonnes (t) in July, according to preliminary data from the US Department of Commerce. Hot-rolled coil (HRC) imports rose by 22,600t from the prior year, driven by a 32,900t jump in Japanese volumes, which were offset slightly by a 9,200t drop from Canada. Cold-rolled coil (CRC) volumes were up by 37,000t in July, with Canada exporting 8,800t more than the prior year. Hot-dipped galvanized (HDG) coil imports from Brazil jumped by 17,200t from the prior year, while volumes from Mexico rose by 13,000t. Volumes of blooms, billets and slabs dropped by 121,900t, as Mexico's volumes dropped to zero from 95,800t in the prior year. By Rye Druzchetta US steel imports metric tonnes Product Jul-24 Jul-23 Volume change ±% Jun-24 HRC 156,952 134,326 22,626 16.8% 156,861 CRC 172,746 135,778 36,968 27.2% 113,400 HDG 233,511 165,607 67,904 41.0% 238,809 Blooms, billets, slabs 364,138 486,053 -121,915 -25.1% 395,478 Total (all items)* 2,197,347 2,153,126 44,221 2.1% 1,955,800 US Department of Commerce July 2024 data is preliminary data, which is subject to change. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
![Generic Hero Banner](/_next/image?url=%2F-%2Fmedia%2Fproject%2Fargusmedia%2Fmainsite%2Fimages%2F14-generic-hero-banners%2Fherobanner_1600x530_generic-c.jpg%3Fh%3D530%26iar%3D0%26w%3D1600%26rev%3D8ec86dce0f724687bd325a9a917cffae%26hash%3D9FD39B08C9D84A160C91A3649C40A186&w=3840&q=75)
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more