Generic Hero BannerGeneric Hero Banner
Latest market news

Viewpoint: LME nickel grapples with identity crisis

  • Market: Metals
  • 29/12/22

This has been a year of crisis for the nickel market, having struggled to recover after being hit by the twin shocks of the Russia-Ukraine conflict and a vicious short squeeze in the first quarter.

Trading volumes in the global benchmark nickel contract on the London Metal Exchange (LME) have collapsed amid reduced trading hours, prices have swung wildly and decoupled from the physical market, and the declining share of LME-deliverable nickel in world supply and consumption has brought into question the future utility of the index as a global price reference.

Nickel prices traded over a range of $21,375-31,275/t in the fourth quarter of this year, with the wide spread attributed chiefly to poor liquidity, down by 40-60pc relative to the period before March's short squeeze that has exacerbated the effect of falling on-warrant inventories in LME warehouses.

On-warrant LME nickel stocks recently hit a 14-year low and have stayed below 50,000t for much of this year, accounting for less than two weeks of global demand to support underlying prices.

The LME faces a major challenge as physical trade increasingly moves on from LME-deliverable nickel to Class 2 and intermediate products, with the so-called Class 1 nickel's supply share of the global market set to drop to 20pc this year, compared with 50pc in 2012.

Nickel briquette constituted 17pc of raw material supply in Chinese nickel sulphate production for the electric vehicles (EVs) market this year, but its share is set to drop to 7pc in 2023 in favour of nickel matte, the use of which is set to rise from 27pc to 38pc over the same period.

According to Australian financial services group Macquarie, 70pc of the world's saleable nickel is currently priced lower than the LME benchmark, indicating a divergence in a market where Class 1 supply-demand fundamentals are tight but Class 2's are in surplus.

Prices of nickel pig iron (NPI), a Class 2 product used in stainless steel production that accounts for half of the world's nickel supply, best illustrate the decoupling. The Argus assessment for NPI min 10pc ex-works China at the beginning of the fourth quarter was at 88.4pc of LME nickel cash official price to 1,330 yuan/mtu ($19,062/t), but was last assessed at 70pc to Yn1,330/mtu ($19,993/t) on 21 December.

Macquarie expects both Class 1 and Class 2 nickel to be in oversupply in 2023 as consumption of Class 1 in nickel sulphate production for the EV market drops — replaced by intermediate products matte and mixed hydroxide precipitate (MHP) — with LME cash nickel prices forecast to fall to $22,500/t from an average of $24,951/t in the fourth quarter of this year. But the group sees no downside to futures prices at below the $20,000/t level either, arguing that any pressure emanating from bearish macro indications and a downturn in stainless steel demand will be outweighed by support from the rapidly expanding global EV battery market and producers' need to hedge medium-term prices.

Dutch investment bank ING echoes Macquarie's sentiment that $20,000/t is the floor price for nickel in 2023, but mainly because it expects the tightness in Class 1 nickel availability to continue amid an emerging overall structural surplus in the market. According to the bank, prices will be driven chiefly by the stainless steel market, particularly in China, and even as demand from the EV battery sector grows rapidly, growth will not be sufficient to offset a slowdown in traditional sectors such as construction.

"We see [benchmark nickel] prices hovering at between $20,000/t and $20,500/t over the first two quarters of 2023 before gradually increasing to $21,000/t in the third quarter and $22,000/t in the fourth quarter as the global growth outlook starts to improve," ING commodities strategist Ewa Manthey said.

All roads lead to Indonesia

Indonesia remains the epicentre of Class 2 nickel supply growth.

According to research consultancy Wood Mackenzie, as many as 27 new NPI lines are scheduled to be operational in Indonesia next year, with NPI accounting for 70pc of China's raw material usage in 300-series stainless steel production against refined nickel's 3pc.

Russian nickel producer Norilsk Nickel (Nornickel) has forecast Indonesian NPI output to rise by 13pc on the year to 1.304mn t in 2023.

Large new capacities in the intermediates space are also scheduled to start operating in the country next year, eating into demand for LME nickel while using the benchmark as a pricing mechanism all the same. The greatest supply of new MHP will come from PT Huafei, joint venture between Huayou Nickel and Cobalt and Tsingshan, which is set to become operational next year with a nameplate capacity of 120,000 t/yr of nickel. And it is possible that more than 200,000t of nickel in matte will also come on line in 2023.

Russian supply is key

Price forecasts for 2023 are set against the backdrop of ongoing risks surrounding Russian supply.

Nornickel, the largest producer of LME-deliverable nickel that accounts for approximately 200,000t of supply, remains untouched by western sanctions but is having to battle the economic fallout of the Russia-Ukraine conflict, logistical problems in getting feed to its Harjavalta refinery in Finland and a degree of self-sanctioning from western buyers.

Market participants surveyed by Argus in the past week noted reports that Nornickel is considering cutting its 2023 supply by 10pc relative to this year's planned output of 205,000-215,000t on lower expected uptake in Europe, which constitutes half of its total sales, and the emerging nickel surplus.

"Ultimately, they [Nornickel] have to be worried that if a lot of their material finds its way into LME warehouses, the prospect of LME prices trading at heavy discounts to the actual market becomes high," a trading firm said.

Heading into 2023, the nickel market's foremost concern remains the prevailing volatility in benchmark prices, with only a restoration of trust in the three-month nickel contract by the LME or a switch to an alternative exchange contract said to present the way forward. And with rising Class 2 supply, market participants in the new year will also be forced to consider whether a single price reference is feasible and can accurately reflect a highly fragmented physical space. Until volumes pick up again and market confidence is restored, the market will have to brace itself for persistent disruption to pricing mechanisms in the near term.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
05/05/25

US vehicle sales slip in April from 4-year high

US vehicle sales slip in April from 4-year high

Houston, 5 May (Argus) — Domestic sales of light vehicles in April slipped from a four-year high the prior month but still reflected robust purchasing ahead of planned implementation of more US tariffs on the automotive industry. Sales of light vehicles — trucks and cars — dipped to a seasonally adjusted rate of 17.3mn units in April, down from 17.8mn in March, the Bureau of Economic Analysis reported today. Last month's total still was above April 2024's annualized rate of 16mn and was the second-highest monthly reading since April 2021. US consumers maintained steady purchasing last month in a rush to beat 25pc tariffs on imports of vehicle parts that were set to be implemented on 3 May. Those higher duties are expected to raise input costs for domestic automakers, and thus, prices for buyers. US president Donald Trump early last week signed an order that allows vehicle manufacturers to partially recoup tariff-related costs, helping to ease the burden. Still, Trump maintained his goal of forcing US automakers to become wholly reliant on auto parts made in the US. Trump already instituted 25pc tariffs on imports of foreign-made vehicles on 3 April. Tariff-related pressures have dented US consumer sentiment and weighed on domestic manufacturing activity, but certain pockets of the economy have shown resilience such as the services industry and employment. Truck sales last month fell by 1.9pc sequentially to 14.4mn unit rate, while car sales dropped by 8.8pc to a 2.9mn unit rate. Domestic vehicle production fell to a seasonally adjusted annual rate of 10.07mn from an upwardly revised 10.09mn in February, according to US Federal Reserve data. That compares with 11.08mn in March 2024. Auto assemblies are reported with a one-month lag to sales. By Alex Nicoll Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Ford expects $1.5bn tariff hit in 2025


05/05/25
News
05/05/25

Ford expects $1.5bn tariff hit in 2025

Pittsburgh, 5 May (Argus) — Ford expects tariffs to cost the US automaker about $1.5bn in profit this year, causing the firm to withdraw its full-year financial guidance today. Tariffs and the uncertain rollout of potential changes to those tariff caused the Dearborn, Michigan-based company to suspend its 2025 guidance, which was initially projected at $7bn-8.5bn in earnings before interest and taxes. US president Donald Trump has place 25pc import taxes on vehicles, steel and aluminum, placing immense pressure on US automakers, many of whom have operations in Mexico and Canada. Ford is the third major US automaker to rescind its financial guidance in the past week following similar decisions by Stellantis and General Motors . By James Marshall Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Mexico's manufacturing contraction deepens in April


05/05/25
News
05/05/25

Mexico's manufacturing contraction deepens in April

Mexico City, 5 May (Argus) — Activity in Mexico's manufacturing sector shrank for a 13th straight month in April, with declines accelerating in production and new orders, according to a survey of purchasing managers. The manufacturing purchasing managers' index (PMI) fell to 45.5 in April from 46.9 in March, finance executives' association IMEF said, moving further below the 50-point threshold that separates growth from contraction. US tariffs imposed since March are adding pressure to Mexico's manufacturing sector, which makes up about a fifth of the national economy. The auto industry, responsible for roughly 18pc of manufacturing GDP, may be the hardest hit by the new measures, including a 25pc tariff on auto parts that took effect 3 May. Mexico remains the top exporter of vehicles to the US, supplying 23pc of all US auto imports in 2024. But IMEF said tariffs compound broader, mostly domestic headwinds, including reduced public spending and investor uncertainty stemming from sweeping legal and regulatory reforms. New investment has stalled since late 2024. The PMI index for new orders fell by 2.5 points to 41.8, the lowest since June 2020. Production dropped by 2.5 points to 43.6, while employment fell by 0.6 point to 46.4. New orders and production have now been in contraction for 14 straight months, and employment for 15. Inventories saw the steepest drop in April, falling 4 points to 46.3 — sliding from expansion to contraction — as manufacturers accelerated shipments after tariff implementation dates were confirmed. IMEF's non-manufacturing PMI — which covers services and commerce — remained in contraction for a fifth consecutive month but edged up by 0.5 points to 49.0 in April. Within that index, new orders rose by 0.6 points to 48.1, employment increased 1.3 points to 48.6 and production held steady at 47.5. By James Young Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Australia's Labor win may aid low-carbon Fe, Al sectors


05/05/25
News
05/05/25

Australia's Labor win may aid low-carbon Fe, Al sectors

Sydney, 5 May (Argus) — The Australian Labor party's victory in the country's 3 May parliamentary election could support low-carbon iron and aluminium developers, providing policy clarity and public capital to the sectors. Labor's victory provides more certainty around Australia's A$14bn ($9.06bn) green hydrogen subsidy scheme, which will help steel producers transition towards hydrogen-powered steel furnaces. The opposition Coalition during the election pledged to scrap the programme, which will allow producers to claim A$2/t of green hydrogen produced from 2027. Australian steelmaker NeoSmelt and South Korean steelmaker Posco are developing electric iron smelters in Western Australia (WA) that produce hot-briquetted iron, which is used in the green steel process. Both projects will initially rely on natural gas but may transition to hydrogen-based processing as hydrogen production rises. Australia's hydrogen tax credits may prove crucial given ongoing hydrogen production challenges. South Australia's state government closed its Office of Hydrogen Power SA on 2 May, following a funding cut earlier this year. Labor can now also move forward with plans for A$2bn in low-emissions aluminium production credits, beginning in 2028-29. Smelters will be able to claim credits per tonne of low-carbon aluminium produced, based on their Scope 2 emission reductions. The party's proposal does not include any blanket credit for producers. Labor's aluminium production credits are aimed at supporting the Australian government's goal of doubling the country's share of renewable power from about 40pc to 82pc by 2030. Australian producers export about 1.5mn t/yr of aluminium, according to industry body Australian Aluminium Council, from four smelters located around the country. Green iron funding Labor's election win also secures its A$1bn lower-emission iron support pledge , first announced in late February. Half of the fund will go towards restarting and transitioning the 1.2mn t/yr Whyalla steelworks in South Australia into a green steel plant. The other half will support new and existing green iron and steel projects to overcome initial funding barriers. Labor has not allocated any funding through the programme yet. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Cliffs to idle 3 US steel mills this summer


02/05/25
News
02/05/25

Cliffs to idle 3 US steel mills this summer

Houston, 2 May (Argus) — Integrated steelmaker Cleveland-Cliffs will indefinitely idle its Conshohocken, Riverdale, and Steelton steel mills this summer in response to weak demand for the products produced at the mills. The idlings will impact about 950 workers spread across the 700,000 short ton (st)/yr Riverdale high-carbon coil mill in Illinois, the 500,000st/yr Conshohocken specialty plate mill in Pennsylvania and the 300,000st/yr Steelton, Pennsylvania railroad rail mill, a company spokesperson told Argus . Cliffs said the moves are temporary and will begin at the end of the required 60-day WARN notice periods in their respective states — on or about 30 June. By Marialuisa Rincon Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more