West Australian iron ore exports at 2023 high

Market: Metals
21/03/23

Iron ore exports from Western Australia's (WA) Pilbara region rose to the highest in 2023 in the week to 18 March, as BHP came back from maintenance and Rio Tinto's supplies hit a three-month high owing to drier weather.

Rio Tinto, BHP, Fortescue and Roy Hill loaded vessels with a combined 18.76mn deadweight tonnes (dwt) of capacity in the latest week, up from 15.24mn dwt in the week to 11 March, according to initial shipping data collated by Argus. The dwt is the maximum capacity of a vessel and overestimates actual shipments by around 5pc.

BHP's loadings returned to average after five weeks of below average performance, following a fatal accident in early February, and Rio Tinto was 19pc above its annual rolling weekly average of 6.61mn dwt.

All firms benefited from a dry week in the Pilbara, although Fortescue's shipments were 7pc below its rolling average. The Australian Bureau of Meteorology (BoM) has forecast a largely dry week ahead, with some storms possible towards the end of the week. There are no tropical cyclones within the BoM's zone.

BHP loaded vessels with 5.73mn dwt of capacity in the week to 18 March, up from 4.38mn dwt the previous week. It has warned that January-June shipments could be disrupted by maintenance on its rail and port infrastructure.

Fortescue's loadings rose to 3.52mn dwt, from 3.46mn dwt in the week to 11 March, but were still below its on-year rolling average of 3.78mn dwt/week. Roy Hill's shipments rose to 1.64mn dwt from 1.17mn dwt and were 31pc above its average after a couple of depressed weeks. Rio Tinto loaded vessels with 7.87mn dwt of capacity, up from 6.23mn dwt in the previous week and at the highest level since mid-December.

China was listed as the destination for 80pc of shipments in the latest week, up from 76pc the previous week but still below the average of around 82pc.

The Argus ICX iron ore was last assessed at $126.55/dry metric tonne (dmt) cfr Qingdao on a 62pc Fe basis on 20 March, down from $133.40/dmt on 15 March but up from a recent low of $79/dmt on 31 October 2022.

By Jo Clarke

Iron ore prices $/dmt

WA iron ore loadings mn dmt

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News

26/12/24

Viewpoint: Real, tariffs to hit Brazil steel imports

Sao Paulo, 26 December (Argus) — Steel importers in Brazil are likely to face a tougher market in 2025 as government measures and the Brazilian real's depreciation to the US dollar make products from abroad less attractive. Brazilian steel importers are concerned that tariff-quota and antidumping policy changes made this year by the federal and state governments could raise costs for importing cargoes in 2025, likely exacerbating the impacts of a sharply depreciated Brazilian real relative to the dollar. The concerns come as US president-elect Donald Trump is already raising global trade tensions, with specific focus on Mexico, Canada and China, that could unleash waves of dueling trade measures. After seeing strong import growth in the post-Covid-19 recovery, Brazil steel importers are fretting they may lose momentum. Brazil's steel imports year-to-date November rose by nearly 24.4pc to 5.6mn metric tonnes (t) from the same period a year earlier. They are expected to end the full year 2024 up by 24pc, according to steel association Aco Brasil, after climbing by 50pc in 2023. Apparent consumption rose by 9.6pc to 24mn t in the 11 months through November, while production increased by just 5.6pc to 31.17mn t from a year earlier. Even with a 28pc depreciationof the real to the dollar in the 12 months through 24 December, prices for dollar-denominated steel imports still have a cost advantage over domestically produced steel. But that advantage is narrowing as the real weakens, with the price difference from imports over the domestic market narrowing to just $112/t in the latest assessment for hot-rolled coils (HRC) from $172/t in mid-October . "The dollar's [appreciation to the real] is messing up imports," one market participant told Argus , saying a wider price advantage for importers was necessary to offset issues like the exchange rate risk and the shipping time. Market participants also cited rising borrowing costs in Brazil as an additional challenge for imports, as many buyers rely on financing to purchase material from abroad. Brazil's central bank on 11 December unexpectedly hiked its target interest rate by a full percentage point to 12.25pc , citing the country's uncertain fiscal situation, accelerating inflation and challenging external conditions. Importers recently expressed concerns over Santa Catarina state's decision to no longer grant tax incentives for imports of six different steel and iron products for commercialization or resale in 2025. Although the timeline for implementing the measure was postponed to July and could face changes, importers remain concerned and are monitoring any possible reviews of the decision, sources told Argus . Santa Catarina's main port, Sao Francisco do Sul, accounted for over one-third of every steel product that is imported to Brazil from January to September, according to data from the country's distributors association, INDA, published in September. On the federal front, the government is likely to announce new and renewed antidumping measures for products coming mainly from China, Brazil's largest steel supplier. Another obstacle for importers would be a possible review of the tariff system for steel imports, which was implemented in June 2024 and led to additional tariffs of up to 25pc. The measure proved mostly ineffective at curbing imports into Brazil, and the industry group Aco Brasil said it would ask for adjustments . Despite the challenges, there is still room for importers to bring material to Brazil , as the country lacks steel to supply its domestic demand, another market participant said. "Brazil will always need imports because it still lacks some key home-made products to feed its market," the participant said. By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Find out more

News

China's GFEX launches polysilicon futures contracts

26/12/24

News

26/12/24

China's GFEX launches polysilicon futures contracts

Beijing, 26 December (Argus) — China's Guangzhou Futures Exchange (GFEX) has launched futures contracts and options for polysilicon today. This is the third contract that GFEX has launched, following the launch of its contracts for silicon metal in December 2022 and lithium carbonate in July 2023. The launch of polysilicon contracts is aimed at easing a supply surplus and ensuring market development, given increasing new capacities at polysilicon producers and lower-than-expected demand from the downstream silicon wafer industry in the past two years, according to market participants. The new contracts are for benchmark N-type polysilicon and substitute P-type polysilicon. The exchange has set a premium of 12,000 yuan/t ($1,644/t) for the N-type over the P-type. It is offering seven contracts starting from June 2025 until December. The most-traded June contracts for N-type polysilicon on the GFEX closed at Yn41,570/t on 26 December, up from the launch price of Yn38,600/t, with trading volumes totalling 301,655 lots, equivalent to around 905,000t. GFEX has established delivery points for the new contracts in eight provinces, including Inner Mongolia, Sichuan, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang. Output and consumption in these regions account for 93.1pc and 91pc of the country's total output and consumption respectively, according to GFEX. South China-based GFEX launched in April 2021 and is partly owned by China's four operational futures exchanges — the Shanghai Futures Exchange, Zhengzhou Commodity Exchange, Dalian Commodity Exchange and the China Financial Futures Exchange — with each holding a 15pc stake. Market reaction Some market participants expect the new futures contracts will ease pressure from ample spot inventories and shore up spot market sentiment in the coming months. But the market has yet to see immediate effects on the first trading day. Argus -assessed domestic prices for 5-5-3 grade silicon metal — a key feedstock in the production of silicon powder, which is the feedstock for polysilicon — held at Yn11,200-11,400/t delivered to ports on 26 December, unchanged from 24 December given limited buying interest from consumers. The most-traded February contracts for 5-5-3 grade silicon on the GFEX closed at Yn11,190/t on 26 December, down from Yn11,585/t on 25 December. China is the world's largest polysilicon producer, producing 1.74mn t during January-November, up by 33pc from a year earlier, according to data from the China nonferrous metals industry association (CNIA). It has an production capacity of over 2mn t/yr, according to industry estimates. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Japan’s crude steel output to recover in FY2025: IEEJ

26/12/24

News

26/12/24

Japan’s crude steel output to recover in FY2025: IEEJ

Tokyo, 26 December (Argus) — Japan's crude steel output is expected to recover during April 2025-March 2026, given higher output in wider domestic industries, according to government affiliated think-tank the Institution of Energy Economy Japan (IEEJ). The country's crude steel output will increase by 4.1pc on the year to 86.5mn t in 2024-25, according to the IEEJ's projection on 24 December. This will mark the first year-on-year growth in four years. A recovery is mostly attributed to an uptrend in wider domestic industrial sectors including automobile, electric and industrial machinery, IEEJ said. It sees domestic car output increasing by 1.8pc to 8.9mn units from a year earlier. IEEJ did not provide further details, but it suggested that expanding investment for digital and green transformation will underpin the steel demand throughout the period. The think-tank also predicts that the country's steel product exports will increase by 1.2pc on the year following an upward trend in the global manufacturing sectors. Japan delivered around 32mn t of steel products overseas during 2023-24, according to the industry group the Japan Iron and Steel Federation (JISF). The country's crude steel output has been sluggish throughout 2024, partly owing to weak demand from the construction and automobile sectors. Rising material costs and labour shortages have led to fewer construction projects in the country, weighing on steel demand. Operational suspensions at major auto manufacturers including Toyota and Daihatsu, following alleged false reporting on safety test results, also pressured steel demand. This partially led to the tenth consecutive month of year-on-year decline in booked orders of ordinary steel for car use in October, according to JISF. By Yusuke Maekawa Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Viewpoint: US tariffs, new EAFs may alter scrap flows

24/12/24

News

24/12/24

Viewpoint: US tariffs, new EAFs may alter scrap flows

Pittsburgh, 24 December (Argus) — A wave of new electric arc furnace steel mills coming on line next year could transform scrap flows in North America, while looming US import tariffs could stunt cross-border trade. Six steel mills in the US and Canada, accounting for about 9.9mn short tons (st)/yr of electric arc furnace (EAF) production, are ramping up from late this year or scheduled to start up in 2025. The new EAFs, mostly along the Mississippi River and in Ontario, could be magnets for scrap and reshape flows across the southeast, Midwest and Canada, as scrap-fed EAF steelmakers continue to expand their role in North America, which was historically dominated by coal and iron ore-fed blast furnaces. Although some scrap dealers are optimistic about markets in the new year, market participants are carefully monitoring the effect president-elect Donald Trump's hawkish trade policies could have on scrap trading. Trump has pledged to impose 25pc tariffs on US imports from Canada and Mexico that could further shift North American scrap flows. Canada is the largest shipper of ferrous scrap into the US at an average of 3mn metric tonnes (t)/yr since 2021. Prime scrap imports between January and October this year averaged 47,000t/month, while shred imports averaged 70,000t/month, US customs data shows. The import tax would drive up the cost of Canadian scrap for US buyers and potentially reduce supply available to steel mills in the Midwest. Scrap traders noted that Trump can be unpredictable and may be using the threat of tariffs as leverage. "I'm pretty tepid on the first quarter," one Midwest dealer said. "People are trying to figure out how serious Trump is on tariffs." New EAFs to drive scrap demand The new scrap-fed EAFs in North America include Algoma Steel in Ontario, Hybar in Arkansas, and Nippon Steel's and ArcelorMittal's joint venture in Alabama. US Steel's Big River Steel began melting scrap at its second Arkansas EAF in October. EAF steelmaker Hybar plans to open its 630,000 st/yr reinforcing bar mill in northeast Arkansas in the summer of 2025. Hybar, along with Big River Steel and three Nucor mills already in the region, could further bolster the lower Mississippi River basin as a major scrap market. "I'm looking forward to next year because of the increased competition," a Midwestern scrap dealer said. "It's always good to have options." The new consumption could position northeast Arkansas and Tennessee as perhaps the top scrap consuming region, making it an industry barometer in 2025. Chicago has historically held that position and has been the benchmark region in contracts. Shifting flows in Canada Algoma Steel plans to begin ramping up two new EAFs in Sault Ste Marie, Ontario, in March next year to continue making hot-rolled coil and steel plate. The EAFs could eventually bring that facility's maximum steel production levels to 3.7mn st/yr once they fully replace Algoma's blast furnaces. The steelmaker will likely focus on low-copper shred and prime scrap grades to keep up the iron content in its melt mix as it transitions to EAF steelmaking, one Canadian scrap consumer said. Algoma may also continue to rely on raw inputs like direct reduced iron and hot briquetted iron as it ramps up its scrap buying to feed the EAFs. Market participants in Canada expect the mill to buy scrap from the prairies west of Sault Ste Marie, as well as from the greater Toronto area to the mill's east, though Algoma will face competition to pull scrap from the latter region. Scrap dealers in the upper Midwest are also keen to supply Algoma Steel because buyers in that region are scarce. A Midwest dealer noted that Algoma may ship in scrap from US ports on the Great Lakes. Algoma did not respond to requests for comment on its raw material plans. In 2021, the company set up a joint venture with Triple M Metal, a Canadian scrap dealer with 45 yards, that will likely supply scrap for Algoma Steel in Sault Ste Marie. By James Marshall and Brad MacAulay US steel mill capacity additions Million short tons/yr Company Location Product type Capacity added Start date US Steel/Big River Steel Osceola, AR Sheet 3.00 RAMPING ArcelorMittal/Nippon Steel Calvert, AL Sheet 1.65 2H 2024 Algoma Steel Sault Ste. Marie, ON Sheet 3.70 1Q 2025 Nucor Lexington, NC Bar 0.43 1Q 2025 Hybar Osceola, AR Bar 0.63 2Q 2025 CMC Berkeley, WV Bar 0.50 4Q 2025 Total 9.91 Argus reporting & public statements Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Viewpoint: FeV demand may grow next year

24/12/24

News

24/12/24

Viewpoint: FeV demand may grow next year

London, 24 December (Argus) — Ferro-vanadium (FeV) demand, which is closely tied to the carbon steel sector, has the potential to grow next year after a sluggish 2024, but economic and geopolitical uncertainties make conditions difficult to forecast. The outlook suggests FeV consumption will increase, driven by global steel production growth, particularly in countries such as India, as well as a potential rebound in key markets such as the US and Europe. The World Steel Association (Worldsteel) sees 2025 demand rising by 1.2pc to 1.772bn t, after a slight contraction this year. Most of the major economies, including China, are likely to record lower steel demand this year, although India bucks the trend, with robust demand growth expected throughout 2025. In developed economies, steel demand could grow by 1.9pc next year, driven by a recovery in the EU and, to a lesser extent, in the US and Japan. Buyers in Europe have been wary about purchasing large volumes of FeV in recent weeks, with fewer volumes expected in next year's long-term contracts as steel plants are looking for more flexibility and are "afraid of buying material that in the end they might not need", a trading firm said. Construction The construction sector remains a crucial driver of FeV consumption, primarily because of its dependence on steel for infrastructure projects. But the construction industry's challenges, particularly residential construction in developed economies, have dampened overall steel demand. High borrowing costs have stifled housing activity, with interest rate hikes slowing building projects. "A meaningful recovery in residential construction (in the EU, US and South Korea) is expected to begin from 2025 onwards with the expected easing of financing conditions," Worldsteel said. Rebar production also has faced challenges, with Chinese steel mills reducing output on lower demand from the real-estate sector up to September, when new rebar standards were introduced by China's government. The new standards were intended to encourage higher vanadium content in steel, but the anticipated FeV demand boost has not yet materialised because overall appetite for the alloy remains suppressed by ongoing struggles in China's real-estate sector. China's rebar output fell by 1.9pc on the year to 17.7mn t in October , with January-October output showing a 14pc drop from the same period a year earlier, according to data from the National Bureau of Statistics. Without any lift from China, European FeV prices remain driven primarily by weakness in the continent's own construction sector, which continues to limit steel rebar trading volumes. Argus' weekly Italian domestic rebar assessment was at €550/t ex-works on 11 December, marking an 11pc drop from the start of this year. Automotive The automotive sector, particularly the electric vehicles (EV) market, will be a key driver of FeV demand next year. High-strength low-alloy (HSLA) steel — a type of carbon steel known for its superior strength-to-weight ratio — is crucial for light vehicles and EVs. While light vehicles and EV manufacturing has slowed this year, with factory closures and inventory reductions by major carmakers such as Volkswagen and Stellantis , the industry is expected to recover next year as the push towards sustainability continues. The green transition, which includes renewable energy projects and electric grid expansions, will further contribute to the demand for HSLA steel and, by extension, FeV. But EV growth is likely to slow in the short term under the administration of US president-elect Donald Trump, who could prioritise traditional energy sectors, potentially limiting support for renewables, industry participants said. By Roxana Lazar Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more