Generic Hero BannerGeneric Hero Banner
Latest market news

Glassmaking decline to weigh on metals demand

  • Market: Metals
  • 15/05/23

Glass production in Europe has fallen from a record high reached in the second half of 2022 as the global industry faces tightening supply owing to high energy costs and supply chain disruptions.

Demand for glass from industries as diverse as food packaging, ceramics and solar panels continues to rise, but supply has become constrained, which has implications for the range of metals used in glass colouring, decolourisation and coatings.

Oxides of chromium, cobalt, manganese, titanium and vanadium are used in glass production, as well as selenium, cerium, copper, nickel and iron. Sulphurous compounds of lead, copper, cadmium and iron are used in the production of coloured glass. Platinum, platinum-rhodium alloys and iridium are used in production equipment and corrosion-resistant coatings. Lower glass production translates into lower demand for metals from manufacturers.

The energy crisis has had a substantial effect on glass production as an energy-intensive process. Gas and electricity supply accounts for around 24pc of output costs, according to the European Container Glass Federation.

The EU is the world's largest glass supplier, accounting for around a third of global production. Approximately 80pc of the glass manufactured is traded within the EU. Container glass accounts for around 60pc of EU glass output in terms of volume and around 54pc in terms of value, flat glass accounts for around 30pc by volume and value, and domestic glass, special glass, and reinforcement glass fibres account for the remainder. There are 162 container glass factories across 23 countries in Europe.

The largest producers in the region, such as Germany and Italy, are among the countries that depend on Russian gas imports.

Glass production in Germany has declined from a record high in April 2022, with the monthly production index for the manufacture of glass and glass products dropping from 110.4, according to Eurostat data. While the index ticked up to 107.5 in August from 105.6 in July and moved up to 103.4 in January from 102.5 in December, the value dropped to 97.8 in March, its lowest level since November 2021.

The index for Italy fell to 116.3 in March from a peak of 129.6 in August and 119.5 a year earlier. The production index for France fell to 103 in March from a high of 114.8 a year earlier.

Glass furnaces heat sand to 1,500-2,000°C and must run continuously to keep the glass in a liquid state, as switching off the furnace cools and solidifies the glass, damaging the ceramic equipment. Furnaces primarily use gas as their source of energy and cannot easily switch to electricity or renewable fuels such as biomass.

There are electric furnaces in operation for small production runs and over the long term the industry is looking to replace natural gas supply with renewable electricity, according to the European Container Glass Federation. The process will take time as glass manufacturing involves high start-up costs and the capital-intensive production facilities require long investment cycles.

The industry is calling for support measures at the EU and national levels to help it manage higher energy costs. While European natural gas prices have dropped from their record highs, they remain at wide premiums to their pre-crisis levels.

Two glass manufacturers in France — Arc International and Duralex — restarted their furnaces in April, after eight month and five-month shutdowns, respectively, in response to high gas prices. Both plants received support from the French government to resume operations, with Arc receiving a €10mn loan from the industry ministry. Duralex had an electricity hedging contract in place that allowed it to restart at more favourable prices during the second quarter. AGC Glass France closed the B2 unit of its Boussois plant in February after 21 years in operation. The B1 unit closed in 2020 owing to the Covid-19 pandemic but uses an oxy-combustion process that could allow it to potentially restart to "contribute to AGC's production process decarbonisation objectives by 2030", depending on market conditions, the company said.

AGC said in February that it has developed a technology with Saint-Gobain to convert flat glass production lines from using gas to low-carbon electricity. AGC plans to use the design to refurbish a patterned glass line in the Czech Republic to run on 50pc electricity and 50pc oxygen and gas by the second half of 2024.

Chinese glass production has been ramping up to meet the immediate global demand, but some manufacturers have also faced factory closures owing to energy supply problems and high shipping costs. Delays at US ports have further contributed to the supply crunch.

One sector of the glass industry where production is increasing is solar glass, as photovoltaic (PV) panel manufacturers have been able to pass on higher input costs to customers, given ongoing strong demand for solar PV installations around the world.

India-based Borosil Renewables said last week that it has increased the solar glass production capacity of its German unit, GMB Glasmanufaktur Brandenburg, to 350 t/d from 300 t/d, with a modification that will also reduce its energy consumption. Several Indian glassmakers have announced plans to move into the solar glass production sector.

There are plans for new facilities in Turkey and Canada, as well as the US, where Vitro Architectural Glass is investing $93.6mn to rebuild and modernise a production line at its plant in Pennsylvania. The company has an agreement to supply US solar equipment manufacturer First Solar with glass for its thin-film PV solar panels.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
28/03/25

UK steel importers oppose other countries' caps

UK steel importers oppose other countries' caps

London, 28 March (Argus) — Steel importers in the UK suggest the imposition of a cap on any other countries' quotas could effectively stop trade, given the small volume of the quotas. In a recent submission to the Trade Remedies Authority, UK Steel said 15pc caps should be introduced on other countries quotas for hot-dip galvanised, plate and rebar. But in its submission to the TRA, trading firm Salzgitter Mannesmann argues that any cap based on a percentage of the quota "will ultimately most likely remove rather than reduce imports as shipments from many third countries, notably the far east, require a certain base volume to ship economically to the UK". Other trading firms and service centres told Argus they share the same view. Salzgitter Mannesmann also suggested a new country quotas for individual importers be added to the safeguard based on their imports over the past two or three years. The only local producer of hot-dip galvanised coil, Tata Steel, would be likely to argue against this as volumes from some countries, notably Vietnam, have increased dramatically in recent years. Salzgitter Mannesmann also suggests Tata Steel cannot produce hot-rolled coil over 1.85m wide, for which the UK has to totally rely on imports. Traders have for some time argued that there should be no import constraints on material, such as 2m wide, as there can be no injury to the producer on grades it cannot produce. Service centre Sebden Steel said the current measures make it "impossible" for the UK to be flooded with cheap foreign imports, and that people are "misinformed by mainstream media and UK Steel". "The UK producer is in a safe place already and any additional measures will only serve to cause injury to independent steel service centres, independent steel stockholders and the UK manufacturing base, which will all be faced with a further tightening of the supply chain and increased costs," it said. Importers, unsurprisingly, question why Tata Steel, now a re-roller until its electric arc furnaces are installed, can import on much more favourable terms than others. Tata has a much bigger quota than the rest of the market, at around 2.3mn t, but the main problem for importers is that the company has fewer constraints on where it can source, with only a 40pc cap on any given country within that quota. Independent service centres, which all compete with Tata Distribution, can only import much smaller quantities from different locations, given the fragmented composition of quotas; the other countries quota for 1A, for example, is less than 100,000 t/yr. EU mills have far and away the largest quota to sell 1A HRC into the UK, but given their higher costs compared with Asian producers, they struggle to compete; Tata's imports come from all over the world, as well as some from its sister mill in IJmuiden, the Netherlands. By Colin Richardson Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Find out more
News

Australia's Aurelia Metals to boost Cu, Zn processing


28/03/25
News
28/03/25

Australia's Aurelia Metals to boost Cu, Zn processing

Perth, 28 March (Argus) — Australian metal producer Aurelia Metals is set to triple mixed metal ore processing capacity of ore from its Federation mine, after authorities in New South Wales state approved a project consent change. Aurelia produces mixed metal ore at its 600,000 t/yr Federation mine. It then hauls ore to its nearby Peak processing centre to produce a range of base and precious metals, including zinc, copper, lead, and gold. The company has been allowed to move only 200,000 t/yr of ore between its two NSW sites since Federation opened in mid-2024, because of consent restrictions. But the latest change allows it to move 600,000 t/yr of ore to Peak, the company announced on 28 March. Aurelia's updated consent comes as it continues to ramp up production at Federation. The company only processed 16,500t of Federation ore in October-December 2024, recovering 55t of copper, 626t of lead, 1,263t of zinc, and 502oz of gold. Aurelia is increasing its base metal production capacity, despite other Australian producers doing the opposite. Australian metal firm IGO paused its Forrestania nickel project in July-September 2024, and will close its Nova copper and nickel mine in 2027. But this phenomenon is not unique to Australia. Global metal producer Glencore cut its total copper output by 6pc in 2024, following planned production declines in Chile and Peru, and unplanned disruptions in the Democratic Republic of Congo. Copper prices have been quite volatile over the last year. The London Metal Exchange's (LME) copper cash price stood at $8,696/t on 27 March 2024, before bouncing between a high of $10,857/t and a low of $8,620/t over the next 12 months. LME's copper price stood at $9,787/t on 27 March. By Avinash Govind Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

Recent deep-sea and short-sea cfr Turkey scrap deals


27/03/25
News
27/03/25

Recent deep-sea and short-sea cfr Turkey scrap deals

London, 27 March (Argus) — A summary of the most recent deep-sea and short-sea cfr Turkey ferrous scrap deals seen by Argus. Ferrous scrap deep-sea trades (average composition price, cfr Turkey) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 21-Mar 40,000 383 (80:20) April Izmir USA HMS 1/2 85:15, shred, bonus Y 18-Mar 30,000 376 (80:20) April Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 18-Mar 40,000 381 (80:20) April Iskenderun USA HMS 1/2 80:20, shred, bonus Y 18-Mar 40,000 380 (80:20) April Marmara Baltics/Scan HMS 1/2 80:20, shred, bonus Y 17-Mar 30,000 375 (80:20) April Iskenderun Cont. Europe HMS 1/2 80:20, shred, bonus Y 14-Mar 30,000 380 (80:20) April Marmara USA HMS 1/2 80:20, shred, bonus Y 13-Mar 30,000 382 (80:20) April Iskenderun USA HMS 1/2 95:5, shred Y 13-Mar 30,000 380 (80:20) April Izmir USA HMS 1/2 80:20, shred Y 13-Mar 30,000 375 (80:20) April Izmir Cont. Europe/UK HMS 1/2 80:20, shred Y 13-Mar 30,000 380 (80:20) March Iskenderun USA HMS 1/2 80:20, shred Y Ferrous scrap short-sea trades (average composition price, cif Marmara) Date Volume, t Price, $ Shipment Buyer Seller Composition Index relevant 24-Mar 3,000 353 April Izmir Romania HMS 1/2 80:20 Y 24-Mar 3,000 351 April Bartin Romania HMS 1/2 80:20 Y 21-Mar 5,000 370 April Izmir Greece HMS 1/2 80:20 Y 21-Mar 6,000 369 April Marmara Italy HMS 1/2 80:20, bonus Y Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

AM/NS India to set up first scrap processing unit


27/03/25
News
27/03/25

AM/NS India to set up first scrap processing unit

Mumbai, 27 March (Argus) — Indian steelmaker ArcelorMittal Nippon Steel (AM/NS) commissioned its first scrap processing facility at Khopoli in western India's Maharashtra state. The 120,000 t/yr facility is the first of four scrap processing units planned by AM/NS to increase supply of domestic scrap. The unit is expected to be operational this year. AM/NS, which has a crude steel capacity of 9mn t/yr, has targeted increasing the scrap mix in its steelmaking from 3-5pc at present to over 10pc by 2030. The company said it can reduce conversion and logistics costs by processing scrap at its own units, instead of procuring it through a complex supply chain where scrap moves from local collectors to scrapyards to consumers. The Indian government has been pushing for higher domestic scrap production to reduce reliance on imports and aid decarbonisation efforts. A vehicle scrappage policy is currently in place, while the government in its financial year 2025-26 budget also outlined measures to boost scrap production through shipbreaking. Still, scrap production has been falling short of the industry's requirements and domestic scrap availability needs to increase, according to market sources. India's scrap imports fell last year as demand faltered and fluctuated and government spending failed to meet expectations. Scrap imports in the south Asian country stood at 8mn t in 2024, falling by just over 20pc from 10.2mn t the previous year, according to customs data. Earlier this year, the rupee's decline to a record low against the US dollar also made imported scrap unviable for many customers, including secondary scrap-based steelmaking units. AM/NS has set aside 3.5bn rupees ($40.8mn) towards a scrap production scheme. About 65pc of the company's steelmaking capacity uses the gas-based direct reduced iron-electric arc furnace (DRI-EAF) route, it said. By Amruta Khandekar Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

News

UK GHG emissions fell by 4pc in 2024


27/03/25
News
27/03/25

UK GHG emissions fell by 4pc in 2024

London, 27 March (Argus) — The UK's greenhouse gas (GHG) emissions fell by 4pc year-on-year in 2024, provisional data released by the government today show, driven principally by lower gas and coal use in the power and industry sectors. GHG emissions in the UK totalled 371mn t of CO2 equivalent (CO2e) last year, the data show, representing a fall of 54pc compared with 1990 levels. The UK has legally-binding targets to cut its GHG emissions by 68pc by 2030 and 81pc by 2035 against 1990 levels, and to reach net zero emissions by 2050. The electricity sector posted the largest proportional year-on-year fall of 15pc, standing 82pc below 1990 levels at 37.5mn t CO2e. The decline was largely a result of record-high net imports and a 7pc increase in renewable output reducing the call on coal and gas-fired generation, as well as the closure of the country's last coal power plant in September , which together outweighed a marginal rise in overall electricity demand, the government said. Industry posted the next largest emissions decline of 9pc, falling to 48.3mn t CO2e, or 69pc below 1990 levels, as a result of lower coal use across sectors and the closure of iron and steel blast furnaces. Fuel supply emissions fell by 6pc to 28.4mn t CO2e, 63pc below where they stood in 1990. And emissions in the UK's highest-emitting sector, domestic transport, fell by 2pc to 110.1mn t CO2e, 15pc below 1990 levels, as road vehicle diesel use declined. Emissions in the remaining sectors, including agriculture, waste and land use, land use change and forestry (LULUCF), edged down collectively by 1pc to 67.2mn t CO2e, some 50pc below 1990 levels. Only emissions from buildings and product uses increased on the year, rising by 2pc as gas use increased, but still standing 27pc below 1990 levels at 79.8mn t CO2e. UK-based international aviation emissions, which are not included in the overall UK GHG figures, rose by 9pc last year to reach pre-Covid 19 pandemic levels of 26.1mn t CO2e, the data show. But UK-based international shipping emissions edged down by 1pc to 6.2mn t CO2e. By Victoria Hatherick Send comments and request more information at feedback@argusmedia.com Copyright © 2025. Argus Media group . All rights reserved.

Generic Hero Banner

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more