China ferrous scrap usage surged in 2019
China's consumption of ferrous scrap grew by 15pc on the year in 2019 to 215.93mn t, according to statistics released today by the Bureau of International Recycling (BIR).
The 28.1mn t rise in Chinese ferrous scrap consumption outpaced an 8.3pc rise in the country's crude steel production to 996.3mn t.
The main driver for the increase was higher pollutant emission standards for the Chinese steel industry, which caused most of the country's basic oxygen furnace (BOF) mills to increase their scrap inputs, BIR said.
The current average steel scrap/crude steel ratio in Chinese BOF mills was estimated by BIR to be 20.2pc.
Higher BOF usage offset a slight fall in China's electric arc furnace (EAF) crude steel output in 2019. Chinese EAF production fell by 14.5pc to 103.2mn t after more than doubling from 54mn t to 120.7mn t between 2017 and 2019.
The EAF share of total Chinese crude steel production decreased to 10.4pc against 89.6pc for BOFs from 13pc against 87pc in 2018.
China's EAFs lost market share against BOF mills in 2019 as high scrap prices caused by tight availability meant EAF steelmakers' margins came under heavy pressure as domestic rebar prices weakened. This resulted in EAF utilisation rates falling throughout 2019.
The longer term rise in EAF production over the past five years, along with the increased scrap utilisation by BOF mills has driven Chinese ferrous scrap consumption up by 159pc, or 132.6mn t, since 2015. Chinese crude steel production only increased by 19.3pc over the same period.
China has become almost completely self-sufficient for sourcing ferrous scrap even as its demand has risen. Restrictions on imports of all scrap metal caused Chinese ferrous scrap imports to collapse in 2019, falling by 86.3pc to 184,000t from 1.34mn t in 2018.
The bulk of those imports were done in the first half of 2019, with even more stringent restrictions enforced from July causing monthly totals to drop below 5,000t throughout the second half.
China offsets fall in wider global scrap usage
The continuing surge in Chinese ferrous scrap demand offset reduced consumption by most major steelmaking regions, apart from the US.
US ferrous scrap rose by 1pc on the year to 60.7mn t in 2019, a slightly lower rate than its 1.5pc rise in crude steel production.
By contrast, ferrous scrap consumption in the EU-28 countries fell by 3.7pc to 87.5mn t against a crude steel production drop of 4.9pc. Japan's steel scrap usage decreased by 7.7pc to 33.7mn t against a 4.8pc crude steel production fall, while South Korean ferrous scrap consumption dropped by 4.7pc to 28.5mn t against a 1.4pc decline in steel output.
Turkish ferrous scrap consumption declined by 10.9pc to 27.9mn t while crude steel output fell by 9.6pc as the country continued to struggle with the impact of the 2018 lira crisis. Russian steel scrap consumption also fell, by 4.3pc to 30.4mn t, against a 0.8pc drop in crude steel output.
The proportion of ferrous scrap used in overall crude steel production declined across all markets where scrap consumption decreased.
Related news posts
Vietnam’s Vinfast cuts EV sales goal, delays US plant
Vietnam’s Vinfast cuts EV sales goal, delays US plant
Singapore, 15 July (Argus) — Vietnam-based electric vehicle (EV) manufacturer Vinfast Auto has lowered its 2024 EV delivery goal and delayed its North Carolina EV plant's first production by three years, because of economic headwinds. "We have adopted a more prudent outlook that is carefully calibrated to near-term headwinds, taking into full consideration the realities of market volatility and potential challenges," said the chairwoman of Vinfast's board of directors Le Thi Thu Thuy on 12 June. Vinfast now expects to deliver 80,000 EVs in 2024, down from the 100,000 units it set earlier this year and having missed its delivery goal of 40,000-50,000 last year. Vinfast delivered 21,747 EVs in January-June, almost doubling on the year, according to the company. Its EV sales over April-June stood at 12,058 units, up by 24pc on the quarter and 26pc on the year. It started building a $2bn EV factory in US North Carolina's Chatham county last year, with output scheduled to begin in 2025 . But the firm has now made the "strategic decision" to push it back to 2028, Vinfast said. VinFast earlier this year said that it would invest $2bn in south India's Tamil Nadu state to develop its EV sector, including building an EV plant that can produce 150,000 units/yr. The plant will be "opened" in the first half of 2025, said Vingroup's chairman Pham Nhat Vuong last month, adding that India will be Vinfast's biggest Asia market. The global battery and EV sectors have been facing various economic and geopolitical headwinds. This includes persistently elevated interest rates that are curbing consumer spending, and rising geopolitical market barriers starting with the US and EU's tariffs on Chinese EVs, as well as Canada looking into potential punitive duties on Chinese EVs. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Germany's Aurubis copper smelter back from maintenance
Germany's Aurubis copper smelter back from maintenance
London, 12 July (Argus) — Germany's Aurubis today announced that its Hamburg copper smelter returned to service on 11 July from the largest maintenance shutdown in the company's history that began 7 May. A restart is now under way following the €95mn 60-day maintenance that included an overhaul of the flash smelter, installation of heat exchangers in the contact acid plant, as well as the installation of a tap hold drill and tamping machine for improved safety of copper slag tapping. Hydrogen-ready anode furnaces were also installed as measures to improve sustainability. Investments in automation are set to improve efficiency and extend the frequency of planned maintenance rounds to three years from two. The Hamburg smelter's outage has exacerbated sulphuric acid tightness in Europe , and the operational restart is expected to provide some relief to the market. This comes in addition to the lack of availability of molten sulphur in the region, leading to shortages of sulphur burnt acid , which has prompted some consumers to replace burnt acid with smelter acid, lifting demand. Aurubis produced 1.19mn t of sulphuric acid during the first six months of the 2023-24 financial year (October-March), up by 1pc on the same period a year earlier. Output at Aurubis' Hamburg smelter rose by 11pc to 512,000t in the period, while output from the Pirdop smelter saw a 6pc decline on the period to 679,000t . For the first three months of the year, Aurubis produced 598,000t of acid, unchanged from the same quarter of 2022-23, as increased output at its Hamburg smelter offset a decline from Bulgaria's Pirdop plant. Production at Hamburg totalled 258,000t from January-March. By Maria Mosquera Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Australia’s BHP to import sulphuric acid for Lynas
Australia’s BHP to import sulphuric acid for Lynas
Singapore, 12 July (Argus) — Australian resources firm BHP has "affirmed its commitment to using reasonable efforts" to supply imported acid to Australia-listed mining company Lynas Rare Earths, Lynas said today. This comes after BHP announced a temporary suspension of its Western Australia nickel business from October, citing bearish expectations against nickel prices. Lynas has a supply contract with BHP Nickel West for the provision of sulphuric acid from the Kalgoorlie nickel smelter or imported sources to its Kalgoorlie rare earths processing facility, with the initial term until 30 June 2027. By Deon Ngee Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US, Mexico exempt Brazilian steel from new 232 tariffs
US, Mexico exempt Brazilian steel from new 232 tariffs
Sao Paulo, 11 July (Argus) — The US and Mexico will exempt Brazilian steel imported from Mexico from adjustments made to the US' section 232 tariffs. Steel imported from Brazil that is processed in Mexico then exported into the US will not be subject to tariffs, the Mexican external relations ministry said today, adding that "the melting and pouring requirements will not apply to products that come from [Brazil]." The US and Mexico jointly announced on Wednesday new import restrictions that will reinstate the 25pc and 10pc section 232 tariffs on some steel and aluminum imported from Mexico, requiring imported steel to be melted and poured in the US-Mexico-Canada free trade agreement (USMCA) region, while aluminum should not contain primary aluminum or be smelt or cast in Belarus, China, Iran or Russia. The new measures aimed at preventing Chinese steel from triangulating through Mexico, which both the administration and a bipartisan group of lawmakers have accused Mexico of allowing . The move is part of an effort from Mexico's government to avoid negative effects on the country's steelmaking sector, which is suffering because of a 50-day long strike at one of its key mills, ArcelorMittal's Lazaro Cardenas mill in the Michoacan state, that has cost the firm almost 500,000 metric tonnes (t) in lost production. Brazil is an important steel exporter to Mexico. In June, the South American country exported around 68,480t of slab to Mexico, more the double the amount from the same month in 2023, according to Brazil's ministry of development, industry and foreign trade data compiled by the Global Trade Tracker. Steelmakers that have greater exposure to selling products with less added value to units in Mexico to then be rolled there are the companies that tend to benefit the most from this situation, Genial Investimentos metals analyst Igor Guedes told Argus . By Carolina Pulice Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more